[U-Boot] [PATCH] phylib: Detect link on 10G devices correctly
gen10g_startup() had 2 bugs:
1) It had a boolean logic error in checking the MMD mask, and always checked all of them.
2) It checked devices which don't actually report link state, which meant that it would never believe the link was fully up.
Fix the boolean logic, and then mask the MMD mask so only link-reporting devices are checked.
Signed-off-by: Andy Fleming afleming@freescale.com Reported-by: Ed Swarthout Ed.Swarthout@freescale.com ---
drivers/net/phy/generic_10g.c | 8 ++++++-- include/linux/mdio.h | 8 ++++++++ 2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c index 315c508..1c3e69e 100644 --- a/drivers/net/phy/generic_10g.c +++ b/drivers/net/phy/generic_10g.c @@ -36,7 +36,7 @@ int gen10g_shutdown(struct phy_device *phydev) int gen10g_startup(struct phy_device *phydev) { int devad, reg; - u32 mmd_mask = phydev->mmds; + u32 mmd_mask = phydev->mmds & MDIO_DEVS_LINK;
phydev->link = 1;
@@ -44,8 +44,12 @@ int gen10g_startup(struct phy_device *phydev) phydev->speed = SPEED_10000; phydev->duplex = DUPLEX_FULL;
+ /* + * Go through all the link-reporting devices, and make sure + * they're all up and happy + */ for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) { - if (!mmd_mask & 1) + if (!(mmd_mask & 1)) continue;
/* Read twice because link state is latched and a diff --git a/include/linux/mdio.h b/include/linux/mdio.h index 022d772..f2080dd 100644 --- a/include/linux/mdio.h +++ b/include/linux/mdio.h @@ -120,6 +120,14 @@ #define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1) #define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
+#define MDIO_DEVS_LINK (MDIO_DEVS_PMAPMD | \ + MDIO_DEVS_WIS | \ + MDIO_DEVS_PCS | \ + MDIO_DEVS_PHYXS | \ + MDIO_DEVS_DTEXS | \ + MDIO_DEVS_AN) + +
/* Control register 2. */ #define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
Hi Andy,
gen10g_startup() had 2 bugs:
- It had a boolean logic error in checking the MMD mask, and
always checked all of them.
Good catch.
- It checked devices which don't actually report link state, which
meant that it would never believe the link was fully up.
Fix the boolean logic, and then mask the MMD mask so only link-reporting devices are checked.
Signed-off-by: Andy Fleming afleming@freescale.com Reported-by: Ed Swarthout Ed.Swarthout@freescale.com
drivers/net/phy/generic_10g.c | 8 ++++++-- include/linux/mdio.h | 8 ++++++++ 2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c index 315c508..1c3e69e 100644 --- a/drivers/net/phy/generic_10g.c +++ b/drivers/net/phy/generic_10g.c @@ -36,7 +36,7 @@ int gen10g_shutdown(struct phy_device *phydev) int gen10g_startup(struct phy_device *phydev) { int devad, reg;
- u32 mmd_mask = phydev->mmds;
- u32 mmd_mask = phydev->mmds & MDIO_DEVS_LINK;
So we are introducing this new macro, right? I don't see this in Linux - how is this handled there? If we do have to create a new name, can't we use something more self-documenting, e.g. MDIO_DEVS_REPORT_LINK or such?
Cheers Detlev
Dear Andy Fleming,
In message 1305762259-5639-1-git-send-email-afleming@freescale.com you wrote:
gen10g_startup() had 2 bugs:
- It had a boolean logic error in checking the MMD mask, and
always checked all of them.
- It checked devices which don't actually report link state, which
meant that it would never believe the link was fully up.
Fix the boolean logic, and then mask the MMD mask so only link-reporting devices are checked.
Signed-off-by: Andy Fleming afleming@freescale.com Reported-by: Ed Swarthout Ed.Swarthout@freescale.com
drivers/net/phy/generic_10g.c | 8 ++++++-- include/linux/mdio.h | 8 ++++++++ 2 files changed, 14 insertions(+), 2 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
participants (3)
-
Andy Fleming -
Detlev Zundel -
Wolfgang Denk