Hello list,

inside the automatic U-Boot patch tracking system a new ticket [DNX#2006102042000014] was created:

<snip>

This sets up the eTSEC and the Marvel Phy to support 10M, 100M and 1000M rates when configured in RGMII mode.

CHANGELOG:

• Add eTSEC support for RGMII mode 10M, 100M & 1000M rates

diff --git a/drivers/tsec.c b/drivers/tsec.c index 7ec565c..6cc6444 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -583,11 +583,10 @@ static void adjust_link(struct eth_devic regs->maccfg2 = ((regs->maccfg2&~(MACCFG2_IF)) | MACCFG2_MII);

• 		/* If We're in reduced mode, we need
  

• 		 * to say whether we're 10 or 100 MB.
  

• 		/* Set R100 bit in all modes although
  

• 		 * it is only used in RGMII mode
  	 */
  

• 		if ((priv->speed == 100)
  

• 		    && (priv->flags & TSEC_REDUCED))
  

• 		if (priv->speed == 100)
  		regs->ecntrl |= ECNTRL_R100;
  	else
  		regs->ecntrl &= ~(ECNTRL_R100);
  

@@ -785,6 +784,7 @@ struct phy_info phy_info_M88E1111S = { {0x1d, 0x5, NULL}, {0x1e, 0x0, NULL}, {0x1e, 0x100, NULL},

• {0x14, 0x0cd2, NULL}, /* Add delay to RGMII TX and RX */
  

  {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},

-- 1.4.2.3

</snip>

Your U-Boot support team