[U-Boot-Users] Status of Cirrus EP9302 based ports
Looking through the archives it appears that the EDB93xx ports never made it into the main distribution.
Where should I be looking for a set of sources that do support the EP93xx series processors?
Any links or tarballs would be appreciated.
...and if I've missed the search engines somewhere, what should I have searched for ;-)
Thanks, Bill Landolina wcl@techatl.com (404) 303-0446
In message f4046u$a7c$1@sea.gmane.org you wrote:
Looking through the archives it appears that the EDB93xx ports never made it into the main distribution.
Where should I be looking for a set of sources that do support the EP93xx series processors?
DAVE supports these on their boards. See http://www.dave-tech.it/ Note that they don't offer free access to the source code.
Best regards,
Wolfgang Denk
On Monday 04 June 2007 03:23:44 Bill Landolina wrote:
Looking through the archives it appears that the EDB93xx ports never made it into the main distribution.
Where should I be looking for a set of sources that do support the EP93xx series processors?
Any links or tarballs would be appreciated.
...and if I've missed the search engines somewhere, what should I have searched for ;-)
I've used the existing patches posted to the linux-cirrus mailinglist to create a new patch for the Olimex CS-E9301 board. Because the board was discontinued in favor of a CS-E9302 board soon after I wrote my patch, and because the majority of the patch was written by other people, I never submitted my changes to the u-boot mainline.
See this posting where I explained what my patch does different, and what sources I used as a base for my patch: http://article.gmane.org/gmane.linux.ports.arm.cirrus/722
You can find the latest version of the patch at http://mmd.ath.cx/cs-e9301/ It applies fine to the current git version (with an offset of 139 lines on one hunk in Makefile).
Best regards,
Dominic
participants (3)
-
Bill Landolina -
Dominic Rath -
Wolfgang Denk