Signed-off-by: Jon Loeliger jdl@freescale.com --- include/configs/v37.h | 19 ++++++++------ include/configs/v38b.h | 48 ++++++++++++++++++------------------ include/configs/versatile.h | 18 ++++++++++---- include/configs/virtlab2.h | 38 +++++++++++++---------------- include/configs/voiceblue.h | 47 ++++++++++++++++-------------------- include/configs/walnut.h | 49 ++++++++++++++++++++----------------- include/configs/wepep250.h | 19 ++++++-------- include/configs/xaeniax.h | 23 ++++++++++------- include/configs/xm250.h | 19 ++++++++------ include/configs/xsengine.h | 13 +++++++-- include/configs/xupv2p.h | 45 ++++++++++++++++++---------------- include/configs/yosemite.h | 56 +++++++++++++++++++++++-------------------- include/configs/yucca.h | 47 +++++++++++++++++++----------------- include/configs/zylonite.h | 24 ++++++++++------- 14 files changed, 248 insertions(+), 217 deletions(-)

diff --git a/include/configs/v37.h b/include/configs/v37.h index a2e99b5..402ed4b 100644 --- a/include/configs/v37.h +++ b/include/configs/v37.h @@ -83,9 +83,15 @@

#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */

-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_DATE +

/* * JFFS2 partitions @@ -105,15 +111,12 @@ #define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)" */

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - /* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -194,7 +197,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif

diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 0b7b19e..3e3d116 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -46,11 +46,6 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */

-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - /* * Serial console configuration */ @@ -89,28 +84,28 @@ #define CONFIG_USB_CLOCK 0x0001BBBB #define CONFIG_USB_CONFIG 0x00001000

+ /* - * Supported commands + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IDE | \ - CFG_CMD_PING | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_IRQ | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_MII | \ - CFG_CMD_SDRAM | \ - CFG_CMD_DATE | \ - CFG_CMD_USB | \ - CFG_CMD_FAT) +#include <config_cmd_default.h> + +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT

-#define CONFIG_TIMESTAMP /* Print image info with timestamp */

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +#define CONFIG_TIMESTAMP /* Print image info with timestamp */

/* * Boot low with 16 MB Flash @@ -254,7 +249,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -270,6 +265,11 @@

#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */

+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if defined(CONFIG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + /* * Various low-level settings */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 16db43b..b908219 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -96,14 +96,22 @@ #define CFG_SERIAL0 0x101F1000 #define CFG_SERIAL1 0x101F2000

-#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV)

-/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */ +/* + * Command line configuration. + */

-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IMI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_BDI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_ENV

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT

#define CONFIG_BOOTDELAY 2 #define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0" diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 06d8536..ac87b39 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -96,27 +96,23 @@

#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */

-#ifdef CONFIG_SPLASH_SCREEN -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_BMP | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) -#else -# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_IDE | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_IDE +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SNTP + +#if defined(CONFIG_SPLASH_SCREEN) + #define CONFIG_CMD_BMP #endif

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h>

/* * Miscellaneous configurable options @@ -131,7 +127,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -214,7 +210,7 @@ * Cache Configuration */ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ #endif

diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 4e97b01..f8879a1 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -131,32 +131,29 @@ #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }

-#ifdef VOICEBLUE_SMALL_FLASH -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN) -#else -#define CONFIG_COMMANDS (CFG_CMD_BDI | \ - CFG_CMD_LOADB | \ - CFG_CMD_IMI | \ - CFG_CMD_FLASH | \ - CFG_CMD_MEMORY | \ - CFG_CMD_NET | \ - CFG_CMD_ENV | \ - CFG_CMD_BOOTD | \ - CFG_CMD_DHCP | \ - CFG_CMD_PING | \ - CFG_CMD_RUN | \ - CFG_CMD_JFFS2) + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BDI +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_IMI +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_RUN + +#if !defined(VOICEBLUE_SMALL_FLASH) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_JFFS2 #endif

+ #define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT #define CONFIG_LOOPW

@@ -220,8 +217,6 @@

#endif /* VOICEBLUE_SMALL_FLASH */

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h>

/* * Miscellaneous configurable options diff --git a/include/configs/walnut.h b/include/configs/walnut.h index b34dc71..2112b53 100644 --- a/include/configs/walnut.h +++ b/include/configs/walnut.h @@ -98,26 +98,29 @@

#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */

-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP +

#undef CONFIG_WATCHDOG /* watchdog disabled */

@@ -128,7 +131,7 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -283,7 +286,7 @@ #define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */ /* have only 8kB, 16kB is save here */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif

@@ -340,7 +343,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h index 47251bb..3b36040 100644 --- a/include/configs/wepep250.h +++ b/include/configs/wepep250.h @@ -36,18 +36,15 @@

/* - * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if - * neccessary in include/cmd_confdefs.h file. (Un)comment for getting - * functionality or size of u-boot code. + * Command line configuration. */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - & ~CFG_CMD_NET \ - & ~CFG_CMD_LOADS \ - & ~CFG_CMD_CONSOLE \ - & ~CFG_CMD_AUTOSCRIPT \ -/* | CFG_CMD_JFFS2 */ \ - ) -#include <cmd_confdefs.h> +#include <config_cmd_default.h> + +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_AUTOSCRIPT +

/* * Boot options. Setting delay to -1 stops autostart count down. diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h index 1039762..1149542 100644 --- a/include/configs/xaeniax.h +++ b/include/configs/xaeniax.h @@ -64,15 +64,20 @@

#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */

-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_NFS | \ - CFG_CMD_SDRAM | \ - CFG_CMD_SNTP )

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_SNTP + +#undef CONFIG_CMD_DTT +

#define CONFIG_ETHADDR 08:00:3e:26:0a:5b #define CONFIG_NETMASK 255.255.255.0 @@ -86,7 +91,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ #endif diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 825bfd1..225d46a 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -81,14 +81,17 @@

#define CONFIG_BAUDRATE 115200

-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DATE | \ - CFG_CMD_I2C ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#define CONFIG_CMD_I2C +

#define CONFIG_BOOTDELAY 3

diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h index dc702cf..37daefe 100644 --- a/include/configs/xsengine.h +++ b/include/configs/xsengine.h @@ -102,10 +102,17 @@

/* allow to overwrite serial and ethaddr */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2)

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_PING +#define CONFIG_CMD_JFFS2 +

#define CONFIG_BOOTDELAY 3 #define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h index b4c720d..cfa1281 100644 --- a/include/configs/xupv2p.h +++ b/include/configs/xupv2p.h @@ -118,27 +118,30 @@ #define CFG_ENV_IS_NOWHERE 1 #define CFG_ENV_SIZE 0x1000 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE) -#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\ - CFG_CMD_MEMORY |\ - CFG_CMD_IRQ |\ - CFG_CMD_BDI |\ - CFG_CMD_NET |\ - CFG_CMD_IMI |\ - CFG_CMD_ECHO |\ - CFG_CMD_CACHE |\ - CFG_CMD_RUN |\ - CFG_CMD_AUTOSCRIPT |\ - CFG_CMD_ASKENV |\ - CFG_CMD_LOADS |\ - CFG_CMD_LOADB |\ - CFG_CMD_MISC |\ - CFG_CMD_FAT |\ - CFG_CMD_EXT2 |\ - CFG_CMD_PING \ - ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_NET +#define CONFIG_CMD_IMI +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_MISC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_PING +

/* Miscellaneous configurable options */ #define CFG_PROMPT "U-Boot-mONStR> " diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 3b106ef..853e4bc 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -239,11 +239,7 @@ /* Comment this out to enable USB 1.1 device */ #define USB_2_0_DEVICE

-#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2) - #define CONFIG_SUPPORT_VFAT -#else -#define CMD_USB 0 /* no USB on 440GR */ #endif /* CONFIG_440EP */

#ifdef DEBUG @@ -252,32 +248,40 @@ #define CONFIG_HW_WATCHDOG /* watchdog */ #endif

-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_EEPROM | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM | \ - CMD_USB) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM + +#ifdef CONFIG_440EP + #define CONFIG_CMD_USB + #define CONFIG_CMD_FAT + #define CONFIG_CMD_EXT2 +#endif +

/* * Miscellaneous configurable options */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -344,7 +348,7 @@ */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif

@@ -356,7 +360,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/yucca.h b/include/configs/yucca.h index 1fdcc4b..ab323aa 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -136,7 +136,7 @@ /* Don't probe these addrs */ #define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}

-/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ +/* #if defined(CONFIG_CMD_EEPROM) */ /* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ /* #endif */ @@ -191,24 +191,27 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */

-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_EEPROM | \ - CFG_CMD_DHCP | \ - CFG_CMD_DIAG | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_SDRAM ) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SDRAM +

#define CONFIG_IBM_EMAC4_V4 1 #define CONFIG_MII 1 /* MII PHY management */ @@ -232,7 +235,7 @@ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ @@ -313,7 +316,7 @@ */ #define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ #define CFG_CACHELINE_SIZE 32 /* ... */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif

@@ -325,7 +328,7 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 1e8ed7a..3e636a2 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -76,19 +76,23 @@

#define CONFIG_BAUDRATE 115200

+ +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + #ifdef TURN_ON_ETHERNET -# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) + #define CONFIG_CMD_PING #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ - | CFG_CMD_ENV \ - | CFG_CMD_NAND) \ - & ~(CFG_CMD_NET \ - | CFG_CMD_FLASH \ - | CFG_CMD_IMLS)) + #define CONFIG_CMD_ENV + #define CONFIG_CMD_NAND + + #undef CONFIG_CMD_NET + #undef CONFIG_CMD_FLASH + #undef CONFIG_CMD_IMLS #endif

-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h>

#define CONFIG_BOOTDELAY -1 #define CONFIG_ETHADDR 08:00:3e:26:0a:5b @@ -100,7 +104,7 @@ #define CONFIG_CMDLINE_TAG #define CONFIG_TIMESTAMP

-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif