[PATCH v2 01/10] clk: imx8mp: Add EQoS MAC clock
Add clock for the DWMAC EQoS block. This is used among other things to configure the MII clock via DM CLK.
Acked-by: Sean Anderson seanga2@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Add AB from Sean --- drivers/clk/imx/clk-imx8mp.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c index ffbc1d1ba9f..6dda0403e35 100644 --- a/drivers/clk/imx/clk-imx8mp.c +++ b/drivers/clk/imx/clk-imx8mp.c @@ -70,6 +70,14 @@ static const char *imx8mp_i2c6_sels[] = {"clock-osc-24m", "sys_pll1_160m", "sys_ "sys_pll3_out", "audio_pll1_out", "video_pll1_out", "audio_pll2_out", "sys_pll1_133m", };
+static const char *imx8mp_enet_qos_sels[] = {"clock-osc-24m", "sys_pll2_125m", "sys_pll2_50m", + "sys_pll2_100m", "sys_pll1_160m", "audio_pll1_out", + "video_pll1_out", "clk_ext4", }; + +static const char *imx8mp_enet_qos_timer_sels[] = {"clock-osc-24m", "sys_pll2_100m", "audio_pll1_out", + "clk_ext1", "clk_ext2", "clk_ext3", + "clk_ext4", "video_pll1_out", }; + static const char *imx8mp_usdhc1_sels[] = {"clock-osc-24m", "sys_pll1_400m", "sys_pll1_800m", "sys_pll2_500m", "sys_pll3_out", "sys_pll1_266m", "audio_pll2_out", "sys_pll1_100m", }; @@ -250,6 +258,8 @@ static int imx8mp_clk_probe(struct udevice *dev) clk_dm(IMX8MP_CLK_DRAM_APB, imx8m_clk_composite_critical("dram_apb", imx8mp_dram_apb_sels, base + 0xa080)); clk_dm(IMX8MP_CLK_I2C5, imx8m_clk_composite("i2c5", imx8mp_i2c5_sels, base + 0xa480)); clk_dm(IMX8MP_CLK_I2C6, imx8m_clk_composite("i2c6", imx8mp_i2c6_sels, base + 0xa500)); + clk_dm(IMX8MP_CLK_ENET_QOS, imx8m_clk_composite("enet_qos", imx8mp_enet_qos_sels, base + 0xa880)); + clk_dm(IMX8MP_CLK_ENET_QOS_TIMER, imx8m_clk_composite("enet_qos_timer", imx8mp_enet_qos_timer_sels, base + 0xa900)); clk_dm(IMX8MP_CLK_ENET_REF, imx8m_clk_composite("enet_ref", imx8mp_enet_ref_sels, base + 0xa980)); clk_dm(IMX8MP_CLK_ENET_TIMER, imx8m_clk_composite("enet_timer", imx8mp_enet_timer_sels, base + 0xaa00)); clk_dm(IMX8MP_CLK_ENET_PHY_REF, imx8m_clk_composite("enet_phy_ref", imx8mp_enet_phy_ref_sels, base + 0xaa80)); @@ -292,10 +302,13 @@ static int imx8mp_clk_probe(struct udevice *dev) clk_dm(IMX8MP_CLK_I2C2_ROOT, imx_clk_gate4("i2c2_root_clk", "i2c2", base + 0x4180, 0)); clk_dm(IMX8MP_CLK_I2C3_ROOT, imx_clk_gate4("i2c3_root_clk", "i2c3", base + 0x4190, 0)); clk_dm(IMX8MP_CLK_I2C4_ROOT, imx_clk_gate4("i2c4_root_clk", "i2c4", base + 0x41a0, 0)); + clk_dm(IMX8MP_CLK_QOS_ROOT, imx_clk_gate4("qos_root_clk", "ipg_root", base + 0x42c0, 0)); + clk_dm(IMX8MP_CLK_QOS_ENET_ROOT, imx_clk_gate4("qos_enet_root_clk", "ipg_root", base + 0x42e0, 0)); clk_dm(IMX8MP_CLK_QSPI_ROOT, imx_clk_gate4("qspi_root_clk", "qspi", base + 0x42f0, 0)); clk_dm(IMX8MP_CLK_I2C5_ROOT, imx_clk_gate2("i2c5_root_clk", "i2c5", base + 0x4330, 0)); clk_dm(IMX8MP_CLK_I2C6_ROOT, imx_clk_gate2("i2c6_root_clk", "i2c6", base + 0x4340, 0)); clk_dm(IMX8MP_CLK_SIM_ENET_ROOT, imx_clk_gate4("sim_enet_root_clk", "enet_axi", base + 0x4400, 0)); + clk_dm(IMX8MP_CLK_ENET_QOS_ROOT, imx_clk_gate4("enet_qos_root_clk", "sim_enet_root_clk", base + 0x43b0, 0)); clk_dm(IMX8MP_CLK_UART1_ROOT, imx_clk_gate4("uart1_root_clk", "uart1", base + 0x4490, 0)); clk_dm(IMX8MP_CLK_UART2_ROOT, imx_clk_gate4("uart2_root_clk", "uart2", base + 0x44a0, 0)); clk_dm(IMX8MP_CLK_UART3_ROOT, imx_clk_gate4("uart3_root_clk", "uart3", base + 0x44b0, 0));
The return is never triggered due to the goto just above it. Drop it. No functional change.
Reviewed-by: Ramon Fried rfried.dev@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Add RB from Ramon --- drivers/net/dwc_eth_qos.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index afc47b56ff5..44d05908894 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -1373,7 +1373,6 @@ static int eqos_probe_resources_tegra186(struct udevice *dev) if (ret) { pr_err("clk_get_by_name(ptp_ref) failed: %d", ret); goto err_free_clk_rx; - return ret; }
ret = clk_get_by_name(dev, "tx", &eqos->clk_tx);
The dm_gpio_free() is never called, because for stm32, the phy_reset_gpio pointer is never valid. This is because only tegra186 ever claims the phy_reset_gpio, all other platforms use the PHY framework to reset the PHY instead. Drop the dm_gpio_free() and dm_gpio_is_valid().
Reviewed-by: Ramon Fried rfried.dev@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: - Add RB from Ramon - Mark eqos variable in eqos_remove_resources_stm32() with __maybe_unused --- drivers/net/dwc_eth_qos.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index 44d05908894..3b62b283c45 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -1490,7 +1490,7 @@ static int eqos_remove_resources_tegra186(struct udevice *dev)
static int eqos_remove_resources_stm32(struct udevice *dev) { - struct eqos_priv *eqos = dev_get_priv(dev); + struct eqos_priv * __maybe_unused eqos = dev_get_priv(dev);
debug("%s(dev=%p):\n", __func__, dev);
@@ -1502,9 +1502,6 @@ static int eqos_remove_resources_stm32(struct udevice *dev) clk_free(&eqos->clk_ck); #endif
- if (dm_gpio_is_valid(&eqos->phy_reset_gpio)) - dm_gpio_free(dev, &eqos->phy_reset_gpio); - debug("%s: OK\n", __func__); return 0; }
This function is only used within the driver, staticize it.
Fixes: 149e80f74b6 ("net: dwc_eth_qos: public some functions") Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: - New patch --- drivers/net/dwc_eth_qos.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index 3b62b283c45..bdf0f2e6812 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -108,7 +108,7 @@ void eqos_flush_desc_generic(void *desc) flush_dcache_range(start, end); }
-void eqos_inval_buffer_tegra186(void *buf, size_t size) +static void eqos_inval_buffer_tegra186(void *buf, size_t size) { unsigned long start = (unsigned long)buf & ~(ARCH_DMA_MINALIGN - 1); unsigned long end = ALIGN(start + size, ARCH_DMA_MINALIGN);
The driver currently only waits for DMA_MODE SWR bit to clear itself. This is insufficient e.g. on i.MX8M Plus, where the MAC must be reset before IOMUX GPR[1] content is latched into the MAC and used. Without the proper reset, the i.MX8M Plus MAC variant does not take the value in IOMUX GPR[1] into account, which makes it impossible e.g. to switch interface mode from RGMII to any other.
Since proper reset is desired in general to put the block into defined state, always assert the DMA_MODE SWR bit before waiting for the bit to clear itself.
Reviewed-by: Ramon Fried rfried.dev@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Add RB from Ramon --- drivers/net/dwc_eth_qos.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c index bdf0f2e6812..66e3f354b65 100644 --- a/drivers/net/dwc_eth_qos.c +++ b/drivers/net/dwc_eth_qos.c @@ -761,6 +761,12 @@ static int eqos_start(struct udevice *dev)
eqos->reg_access_ok = true;
+ /* + * Assert the SWR first, the actually reset the MAC and to latch in + * e.g. i.MX8M Plus GPR[1] content, which selects interface mode. + */ + setbits_le32(&eqos->dma_regs->mode, EQOS_DMA_MODE_SWR); + ret = wait_for_bit_le32(&eqos->dma_regs->mode, EQOS_DMA_MODE_SWR, false, eqos->config->swr_wait, false);
The DWMAC clock in i.MX8M Plus were so far configured via ad-hoc architecture code. Replace that with DM clock instead. This way, the driver claims all its required clock, enables and disables them, and even gets the CSR clock rate and sets the TX clock rate, without any need of architecture specific register fiddling. Drop the architecture specific code while at it too.
The adjustment here is modeled after STM32MP15xx clock handling in this driver.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Turn all the pr_err() into dev_dbg() --- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 41 -------- drivers/net/dwc_eth_qos_imx.c | 131 +++++++++++++++++++++++-- 2 files changed, 121 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 64ad57e9b39..494bfbedc8c 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -872,47 +872,6 @@ int set_clk_eqos(enum enet_freq type)
return 0; } - -int imx_eqos_txclk_set_rate(ulong rate) -{ - u32 val; - u32 eqos_post_div; - - /* disable the clock first */ - clock_enable(CCGR_QOS_ETHENET, 0); - clock_enable(CCGR_SDMA2, 0); - - switch (rate) { - case 125000000: - eqos_post_div = 1; - break; - case 25000000: - eqos_post_div = 125000000 / 25000000; - break; - case 2500000: - eqos_post_div = 125000000 / 2500000; - break; - default: - return -EINVAL; - } - - clock_get_target_val(ENET_QOS_CLK_ROOT, &val); - val &= ~(CLK_ROOT_PRE_DIV_MASK | CLK_ROOT_POST_DIV_MASK); - val |= CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) | - CLK_ROOT_POST_DIV(eqos_post_div - 1); - clock_set_target_val(ENET_QOS_CLK_ROOT, val); - - /* enable clock */ - clock_enable(CCGR_QOS_ETHENET, 1); - clock_enable(CCGR_SDMA2, 1); - - return 0; -} - -u32 imx_get_eqos_csr_clk(void) -{ - return get_root_clk(ENET_AXI_CLK_ROOT); -} #endif
#ifdef CONFIG_FEC_MXC diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c index 42cb164ad14..f5f3f2099f0 100644 --- a/drivers/net/dwc_eth_qos_imx.c +++ b/drivers/net/dwc_eth_qos_imx.c @@ -7,6 +7,7 @@ #include <clk.h> #include <cpu_func.h> #include <dm.h> +#include <dm/device_compat.h> #include <errno.h> #include <eth_phy.h> #include <log.h> @@ -32,20 +33,18 @@ __weak u32 imx_get_eqos_csr_clk(void) return 100 * 1000000; }
-__weak int imx_eqos_txclk_set_rate(unsigned long rate) -{ - return 0; -} - static ulong eqos_get_tick_clk_rate_imx(struct udevice *dev) { - return imx_get_eqos_csr_clk(); + struct eqos_priv *eqos = dev_get_priv(dev); + + return clk_get_rate(&eqos->clk_master_bus); }
static int eqos_probe_resources_imx(struct udevice *dev) { struct eqos_priv *eqos = dev_get_priv(dev); phy_interface_t interface; + int ret;
debug("%s(dev=%p):\n", __func__, dev);
@@ -56,6 +55,118 @@ static int eqos_probe_resources_imx(struct udevice *dev) return -EINVAL; }
+ eqos->max_speed = dev_read_u32_default(dev, "max-speed", 0); + + ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus); + if (ret) { + dev_dbg(dev, "clk_get_by_name(master_bus) failed: %d", ret); + goto err_probe; + } + + ret = clk_get_by_name(dev, "ptp_ref", &eqos->clk_ptp_ref); + if (ret) { + dev_dbg(dev, "clk_get_by_name(ptp_ref) failed: %d", ret); + goto err_free_clk_master_bus; + } + + ret = clk_get_by_name(dev, "tx", &eqos->clk_tx); + if (ret) { + dev_dbg(dev, "clk_get_by_name(tx) failed: %d", ret); + goto err_free_clk_ptp_ref; + } + + ret = clk_get_by_name(dev, "pclk", &eqos->clk_ck); + if (ret) { + dev_dbg(dev, "clk_get_by_name(pclk) failed: %d", ret); + goto err_free_clk_tx; + } + + debug("%s: OK\n", __func__); + return 0; + +err_free_clk_tx: + clk_free(&eqos->clk_tx); +err_free_clk_ptp_ref: + clk_free(&eqos->clk_ptp_ref); +err_free_clk_master_bus: + clk_free(&eqos->clk_master_bus); +err_probe: + + debug("%s: returns %d\n", __func__, ret); + return ret; +} + +static int eqos_remove_resources_imx(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + + debug("%s(dev=%p):\n", __func__, dev); + + clk_free(&eqos->clk_ck); + clk_free(&eqos->clk_tx); + clk_free(&eqos->clk_ptp_ref); + clk_free(&eqos->clk_master_bus); + + debug("%s: OK\n", __func__); + return 0; +} + +static int eqos_start_clks_imx(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + int ret; + + debug("%s(dev=%p):\n", __func__, dev); + + ret = clk_enable(&eqos->clk_master_bus); + if (ret < 0) { + dev_dbg(dev, "clk_enable(clk_master_bus) failed: %d", ret); + goto err; + } + + ret = clk_enable(&eqos->clk_ptp_ref); + if (ret < 0) { + dev_dbg(dev, "clk_enable(clk_ptp_ref) failed: %d", ret); + goto err_disable_clk_master_bus; + } + + ret = clk_enable(&eqos->clk_tx); + if (ret < 0) { + dev_dbg(dev, "clk_enable(clk_tx) failed: %d", ret); + goto err_disable_clk_ptp_ref; + } + + ret = clk_enable(&eqos->clk_ck); + if (ret < 0) { + dev_dbg(dev, "clk_enable(clk_ck) failed: %d", ret); + goto err_disable_clk_tx; + } + + debug("%s: OK\n", __func__); + return 0; + +err_disable_clk_tx: + clk_disable(&eqos->clk_tx); +err_disable_clk_ptp_ref: + clk_disable(&eqos->clk_ptp_ref); +err_disable_clk_master_bus: + clk_disable(&eqos->clk_master_bus); +err: + debug("%s: FAILED: %d\n", __func__, ret); + return ret; +} + +static int eqos_stop_clks_imx(struct udevice *dev) +{ + struct eqos_priv *eqos = dev_get_priv(dev); + + debug("%s(dev=%p):\n", __func__, dev); + + clk_disable(&eqos->clk_ck); + clk_disable(&eqos->clk_tx); + clk_disable(&eqos->clk_ptp_ref); + clk_disable(&eqos->clk_master_bus); + debug("%s: OK\n", __func__); return 0; } @@ -83,7 +194,7 @@ static int eqos_set_tx_clk_speed_imx(struct udevice *dev) return -EINVAL; }
- ret = imx_eqos_txclk_set_rate(rate); + ret = clk_set_rate(&eqos->clk_tx, rate); if (ret < 0) { pr_err("imx (tx_clk, %lu) failed: %d", rate, ret); return ret; @@ -107,11 +218,11 @@ static struct eqos_ops eqos_imx_ops = { .eqos_inval_buffer = eqos_inval_buffer_generic, .eqos_flush_buffer = eqos_flush_buffer_generic, .eqos_probe_resources = eqos_probe_resources_imx, - .eqos_remove_resources = eqos_null_ops, + .eqos_remove_resources = eqos_remove_resources_imx, .eqos_stop_resets = eqos_null_ops, .eqos_start_resets = eqos_null_ops, - .eqos_stop_clks = eqos_null_ops, - .eqos_start_clks = eqos_null_ops, + .eqos_stop_clks = eqos_stop_clks_imx, + .eqos_start_clks = eqos_start_clks_imx, .eqos_calibrate_pads = eqos_null_ops, .eqos_disable_calibration = eqos_null_ops, .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_imx,
On 2/9/23 16:50, Marek Vasut wrote:
The DWMAC clock in i.MX8M Plus were so far configured via ad-hoc architecture code. Replace that with DM clock instead. This way, the driver claims all its required clock, enables and disables them, and even gets the CSR clock rate and sets the TX clock rate, without any need of architecture specific register fiddling. Drop the architecture specific code while at it too.
The adjustment here is modeled after STM32MP15xx clock handling in this driver.
Signed-off-by: Marek Vasut marex@denx.de
Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de
V2: Turn all the pr_err() into dev_dbg()
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 41 -------- drivers/net/dwc_eth_qos_imx.c | 131 +++++++++++++++++++++++-- 2 files changed, 121 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 64ad57e9b39..494bfbedc8c 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -872,47 +872,6 @@ int set_clk_eqos(enum enet_freq type)
return 0; }
-int imx_eqos_txclk_set_rate(ulong rate) -{
- u32 val;
- u32 eqos_post_div;
- /* disable the clock first */
- clock_enable(CCGR_QOS_ETHENET, 0);
- clock_enable(CCGR_SDMA2, 0);
- switch (rate) {
- case 125000000:
eqos_post_div = 1;break;- case 25000000:
eqos_post_div = 125000000 / 25000000;break;- case 2500000:
eqos_post_div = 125000000 / 2500000;break;- default:
return -EINVAL;- }
- clock_get_target_val(ENET_QOS_CLK_ROOT, &val);
- val &= ~(CLK_ROOT_PRE_DIV_MASK | CLK_ROOT_POST_DIV_MASK);
- val |= CLK_ROOT_PRE_DIV(CLK_ROOT_PRE_DIV1) |
CLK_ROOT_POST_DIV(eqos_post_div - 1);- clock_set_target_val(ENET_QOS_CLK_ROOT, val);
- /* enable clock */
- clock_enable(CCGR_QOS_ETHENET, 1);
- clock_enable(CCGR_SDMA2, 1);
- return 0;
-}
-u32 imx_get_eqos_csr_clk(void) -{
- return get_root_clk(ENET_AXI_CLK_ROOT);
-} #endif
#ifdef CONFIG_FEC_MXC diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c index 42cb164ad14..f5f3f2099f0 100644 --- a/drivers/net/dwc_eth_qos_imx.c +++ b/drivers/net/dwc_eth_qos_imx.c @@ -7,6 +7,7 @@ #include <clk.h> #include <cpu_func.h> #include <dm.h> +#include <dm/device_compat.h> #include <errno.h> #include <eth_phy.h> #include <log.h> @@ -32,20 +33,18 @@ __weak u32 imx_get_eqos_csr_clk(void) return 100 * 1000000; }
-__weak int imx_eqos_txclk_set_rate(unsigned long rate) -{
- return 0;
-}
- static ulong eqos_get_tick_clk_rate_imx(struct udevice *dev) {
- return imx_get_eqos_csr_clk();
struct eqos_priv *eqos = dev_get_priv(dev);
return clk_get_rate(&eqos->clk_master_bus); }
static int eqos_probe_resources_imx(struct udevice *dev) { struct eqos_priv *eqos = dev_get_priv(dev); phy_interface_t interface;
int ret;
debug("%s(dev=%p):\n", __func__, dev);
@@ -56,6 +55,118 @@ static int eqos_probe_resources_imx(struct udevice *dev) return -EINVAL; }
- eqos->max_speed = dev_read_u32_default(dev, "max-speed", 0);
- ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus);
- if (ret) {
dev_dbg(dev, "clk_get_by_name(master_bus) failed: %d", ret);goto err_probe;- }
- ret = clk_get_by_name(dev, "ptp_ref", &eqos->clk_ptp_ref);
- if (ret) {
dev_dbg(dev, "clk_get_by_name(ptp_ref) failed: %d", ret);goto err_free_clk_master_bus;- }
- ret = clk_get_by_name(dev, "tx", &eqos->clk_tx);
- if (ret) {
dev_dbg(dev, "clk_get_by_name(tx) failed: %d", ret);goto err_free_clk_ptp_ref;- }
- ret = clk_get_by_name(dev, "pclk", &eqos->clk_ck);
- if (ret) {
dev_dbg(dev, "clk_get_by_name(pclk) failed: %d", ret);goto err_free_clk_tx;- }
- debug("%s: OK\n", __func__);
- return 0;
+err_free_clk_tx:
- clk_free(&eqos->clk_tx);
+err_free_clk_ptp_ref:
- clk_free(&eqos->clk_ptp_ref);
+err_free_clk_master_bus:
- clk_free(&eqos->clk_master_bus);
+err_probe:
- debug("%s: returns %d\n", __func__, ret);
- return ret;
+}
+static int eqos_remove_resources_imx(struct udevice *dev) +{
- struct eqos_priv *eqos = dev_get_priv(dev);
- debug("%s(dev=%p):\n", __func__, dev);
- clk_free(&eqos->clk_ck);
- clk_free(&eqos->clk_tx);
- clk_free(&eqos->clk_ptp_ref);
- clk_free(&eqos->clk_master_bus);
- debug("%s: OK\n", __func__);
- return 0;
+}
+static int eqos_start_clks_imx(struct udevice *dev) +{
- struct eqos_priv *eqos = dev_get_priv(dev);
- int ret;
- debug("%s(dev=%p):\n", __func__, dev);
- ret = clk_enable(&eqos->clk_master_bus);
- if (ret < 0) {
dev_dbg(dev, "clk_enable(clk_master_bus) failed: %d", ret);goto err;- }
- ret = clk_enable(&eqos->clk_ptp_ref);
- if (ret < 0) {
dev_dbg(dev, "clk_enable(clk_ptp_ref) failed: %d", ret);goto err_disable_clk_master_bus;- }
- ret = clk_enable(&eqos->clk_tx);
- if (ret < 0) {
dev_dbg(dev, "clk_enable(clk_tx) failed: %d", ret);goto err_disable_clk_ptp_ref;- }
- ret = clk_enable(&eqos->clk_ck);
- if (ret < 0) {
dev_dbg(dev, "clk_enable(clk_ck) failed: %d", ret);goto err_disable_clk_tx;- }
- debug("%s: OK\n", __func__);
- return 0;
+err_disable_clk_tx:
- clk_disable(&eqos->clk_tx);
+err_disable_clk_ptp_ref:
- clk_disable(&eqos->clk_ptp_ref);
+err_disable_clk_master_bus:
- clk_disable(&eqos->clk_master_bus);
+err:
- debug("%s: FAILED: %d\n", __func__, ret);
- return ret;
+}
+static int eqos_stop_clks_imx(struct udevice *dev) +{
- struct eqos_priv *eqos = dev_get_priv(dev);
- debug("%s(dev=%p):\n", __func__, dev);
- clk_disable(&eqos->clk_ck);
- clk_disable(&eqos->clk_tx);
- clk_disable(&eqos->clk_ptp_ref);
- clk_disable(&eqos->clk_master_bus);
- debug("%s: OK\n", __func__); return 0; }
@@ -83,7 +194,7 @@ static int eqos_set_tx_clk_speed_imx(struct udevice *dev) return -EINVAL; }
- ret = imx_eqos_txclk_set_rate(rate);
- ret = clk_set_rate(&eqos->clk_tx, rate); if (ret < 0) { pr_err("imx (tx_clk, %lu) failed: %d", rate, ret); return ret;
@@ -107,11 +218,11 @@ static struct eqos_ops eqos_imx_ops = { .eqos_inval_buffer = eqos_inval_buffer_generic, .eqos_flush_buffer = eqos_flush_buffer_generic, .eqos_probe_resources = eqos_probe_resources_imx,
- .eqos_remove_resources = eqos_null_ops,
- .eqos_remove_resources = eqos_remove_resources_imx, .eqos_stop_resets = eqos_null_ops, .eqos_start_resets = eqos_null_ops,
- .eqos_stop_clks = eqos_null_ops,
- .eqos_start_clks = eqos_null_ops,
- .eqos_stop_clks = eqos_stop_clks_imx,
- .eqos_start_clks = eqos_start_clks_imx, .eqos_calibrate_pads = eqos_null_ops, .eqos_disable_calibration = eqos_null_ops, .eqos_set_tx_clk_speed = eqos_set_tx_clk_speed_imx,
Reviewed-by: Sean Anderson seanga2@gmail.com
With DM clock support in place, it is easy to add RMII support into the MAC driver. The RMII cannot operate at 1000 Mbps and at 100 and 10 Mbps the clock frequency is 50 MHz and 5 MHz instead of 25 MHz and 2.5 MHz.
The board DT requires the following adjustments to EQoS node: phy-mode = "rmii"; assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>, <&clk IMX8MP_SYS_PLL2_100M>, <&clk IMX8MP_SYS_PLL2_50M>; assigned-clock-rates = <0>, <100000000>, <50000000>;
Reviewed-by: Ramon Fried rfried.dev@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Add RB from Ramon --- drivers/net/dwc_eth_qos_imx.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c index f5f3f2099f0..fb4e6d38e24 100644 --- a/drivers/net/dwc_eth_qos_imx.c +++ b/drivers/net/dwc_eth_qos_imx.c @@ -179,21 +179,25 @@ static int eqos_set_tx_clk_speed_imx(struct udevice *dev)
debug("%s(dev=%p):\n", __func__, dev);
- switch (eqos->phy->speed) { - case SPEED_1000: - rate = 125 * 1000 * 1000; - break; - case SPEED_100: - rate = 25 * 1000 * 1000; - break; - case SPEED_10: - rate = 2.5 * 1000 * 1000; - break; - default: + if (eqos->phy->interface == PHY_INTERFACE_MODE_RMII) + rate = 5000; /* 5000 kHz = 5 MHz */ + else + rate = 2500; /* 2500 kHz = 2.5 MHz */ + + if (eqos->phy->speed == SPEED_1000 && + eqos->phy->interface == PHY_INTERFACE_MODE_RGMII) { + rate *= 50; /* Use 50x base rate i.e. 125 MHz */ + } else if (eqos->phy->speed == SPEED_100) { + rate *= 10; /* Use 10x base rate */ + } else if (eqos->phy->speed == SPEED_10) { + rate *= 1; /* Use base rate */ + } else { pr_err("invalid speed %d", eqos->phy->speed); return -EINVAL; }
+ rate *= 1000; /* clk_set_rate() operates in Hz */ + ret = clk_set_rate(&eqos->clk_tx, rate); if (ret < 0) { pr_err("imx (tx_clk, %lu) failed: %d", rate, ret);
Implement common board_interface_eth_init() and call it from the DWMAC driver to configure IOMUXC GPR[1] register according to the PHY mode obtained from DT. This supports all three interface modes supported by the i.MX8M Plus DWMAC and supersedes current board-side configuration of the same IOMUX GPR[1] duplicated in the board files.
Reviewed-by: Ramon Fried rfried.dev@gmail.com Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: - Add RB from Ramon - Handle RGMII_ID/RGMII_RXID/RGMII_TXID just like plain RGMII --- arch/arm/include/asm/arch-imx8m/imx-regs.h | 8 ++++- arch/arm/mach-imx/imx8m/clock_imx8mm.c | 40 ++++++++++++++++++++++ drivers/net/dwc_eth_qos_imx.c | 4 +++ 3 files changed, 51 insertions(+), 1 deletion(-)
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index 1559bf6d218..1818b459fa6 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -89,7 +89,13 @@ #define DDRC_IPS_BASE_ADDR(X) (0x3d400000 + ((X) * 0x2000000)) #define DDR_CSD1_BASE_ADDR 0x40000000
-#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK 0x70000 +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_RGMII_EN BIT(21) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_TX_CLK_SEL BIT(20) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN BIT(19) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK GENMASK(18, 16) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MII (0 << 16) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RGMII (1 << 16) +#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RMII (4 << 16) #define FEC_QUIRK_ENET_MAC
#ifdef CONFIG_ARMV8_PSCI /* Final jump location */ diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 494bfbedc8c..6d3539ec982 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -15,6 +15,7 @@ #include <errno.h> #include <linux/bitops.h> #include <linux/delay.h> +#include <phy.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -872,6 +873,45 @@ int set_clk_eqos(enum enet_freq type)
return 0; } + +int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type) +{ + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + clrbits_le32(&gpr->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_RGMII_EN | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_TX_CLK_SEL | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN); + + switch (interface_type) { + case PHY_INTERFACE_MODE_MII: + setbits_le32(&gpr->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MII); + break; + case PHY_INTERFACE_MODE_RMII: + setbits_le32(&gpr->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_TX_CLK_SEL | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RMII); + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + setbits_le32(&gpr->gpr[1], + IOMUXC_GPR_GPR1_GPR_ENET_QOS_RGMII_EN | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN | + IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RGMII); + break; + default: + return -EINVAL; + } + + return 0; +} #endif
#ifdef CONFIG_FEC_MXC diff --git a/drivers/net/dwc_eth_qos_imx.c b/drivers/net/dwc_eth_qos_imx.c index fb4e6d38e24..f565a5fd21a 100644 --- a/drivers/net/dwc_eth_qos_imx.c +++ b/drivers/net/dwc_eth_qos_imx.c @@ -55,6 +55,10 @@ static int eqos_probe_resources_imx(struct udevice *dev) return -EINVAL; }
+ ret = board_interface_eth_init(dev, interface); + if (ret) + return -EINVAL; + eqos->max_speed = dev_read_u32_default(dev, "max-speed", 0);
ret = clk_get_by_name(dev, "stmmaceth", &eqos->clk_master_bus);
The assigned-clock no longer have to be dropped, the clock are now defined in clk-imx8mp.c and used by DWMAC driver to configure the DWMAC clock. Drop the workarounds from U-Boot specific DT extras.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: No change --- arch/arm/dts/imx8mp-dhcom-u-boot.dtsi | 6 ------ arch/arm/dts/imx8mp-evk-u-boot.dtsi | 6 ------ arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi | 6 ------ arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi | 6 ------ arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi | 6 ------ 5 files changed, 30 deletions(-)
diff --git a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi index ae838caebcf..ea6ab9f2e17 100644 --- a/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-dhcom-u-boot.dtsi @@ -33,12 +33,6 @@ u-boot,dm-spl; };
-&eqos { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-parents; - /delete-property/ assigned-clock-rates; -}; - &gpio1 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi index f43eb6238d0..cd0fb815c79 100644 --- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi @@ -131,12 +131,6 @@ u-boot,dm-spl; };
-&eqos { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-parents; - /delete-property/ assigned-clock-rates; -}; - ðphy0 { reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; reset-delay-us = <15000>; diff --git a/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi index 342c523b0c5..3e48cf8ec5c 100644 --- a/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-icore-mx8mp-edimm2.2-u-boot.dtsi @@ -130,12 +130,6 @@ u-boot,dm-spl; };
-&eqos { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-parents; - /delete-property/ assigned-clock-rates; -}; - ðphy0 { reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; reset-delay-us = <15000>; diff --git a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi index d8721124526..849950fe026 100644 --- a/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-venice-gw74xx-u-boot.dtsi @@ -20,12 +20,6 @@ }; };
-&eqos { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-parents; - /delete-property/ assigned-clock-rates; -}; - ðphy0 { reset-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; reset-delay-us = <1000>; diff --git a/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi b/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi index 8a4cdc717d2..5f021d17230 100644 --- a/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi +++ b/arch/arm/dts/imx8mp-verdin-wifi-dev-u-boot.dtsi @@ -39,12 +39,6 @@ u-boot,dm-spl; };
-&eqos { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-parents; - /delete-property/ assigned-clock-rates; -}; - &gpio1 { u-boot,dm-spl; };
The EQoS interface mode is now configured in common board_interface_eth_init() and called by EQoS MAC driver when appropriate. Drop the board side duplicates if the same functionality.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: "Ariel D'Alessandro" ariel.dalessandro@collabora.com Cc: "NXP i.MX U-Boot Team" uboot-imx@nxp.com Cc: Andrey Zhizhikin andrey.zhizhikin@leica-geosystems.com Cc: Fabio Estevam festevam@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Lukasz Majewski lukma@denx.de Cc: Marcel Ziswiler marcel.ziswiler@toradex.com Cc: Marek Vasut marex@denx.de Cc: Michael Trimarchi michael@amarulasolutions.com Cc: Peng Fan peng.fan@nxp.com Cc: Ramon Fried rfried.dev@gmail.com Cc: Sean Anderson seanga2@gmail.com Cc: Stefano Babic sbabic@denx.de Cc: Tim Harvey tharvey@gateworks.com Cc: Tommaso Merciai tommaso.merciai@amarulasolutions.com Cc: u-boot@lists.denx.de --- V2: Fix the advantech board build --- .../imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 17 +---------------- .../dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c | 14 -------------- board/engicam/imx8mp/icore_mx8mp.c | 16 ---------------- board/freescale/imx8mp_evk/imx8mp_evk.c | 17 ----------------- board/gateworks/venice/venice.c | 15 --------------- board/msc/sm2s_imx8mp/sm2s_imx8mp.c | 15 --------------- board/toradex/verdin-imx8mp/verdin-imx8mp.c | 16 ---------------- 7 files changed, 1 insertion(+), 109 deletions(-)
diff --git a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c index aa9687f7a9d..56068b0c01e 100644 --- a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c +++ b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c @@ -113,7 +113,7 @@ static const iomux_v3_cfg_t eqos_rst_pads[] = { MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), };
-static void setup_iomux_eqos(void) +static void setup_eqos(void) { imx_iomux_v3_setup_multiple_pads(eqos_rst_pads, ARRAY_SIZE(eqos_rst_pads)); @@ -124,21 +124,6 @@ static void setup_iomux_eqos(void) gpio_direction_output(EQOS_RST_PAD, 1); mdelay(100); } - -static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - setup_iomux_eqos(); - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} #endif /* CONFIG_DWC_ETH_QOS */
int board_phy_config(struct phy_device *phydev) diff --git a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c index 9d8e19d994a..cb9973900bd 100644 --- a/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c +++ b/board/dhelectronics/dh_imx8mp/imx8mp_dhcom_pdk2.c @@ -37,19 +37,6 @@ int board_phys_sdram_size(phys_size_t *size) return 0; }
-static void setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* Set INTF as RGMII, enable RGMII TXC clock. */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - set_clk_eqos(ENET_125MHZ); -} - static void setup_fec(void) { struct iomuxc_gpr_base_regs *gpr = @@ -127,7 +114,6 @@ int dh_setup_mac_address(void)
int board_init(void) { - setup_eqos(); setup_fec(); return 0; } diff --git a/board/engicam/imx8mp/icore_mx8mp.c b/board/engicam/imx8mp/icore_mx8mp.c index b309a12df08..b80513c7957 100644 --- a/board/engicam/imx8mp/icore_mx8mp.c +++ b/board/engicam/imx8mp/icore_mx8mp.c @@ -34,19 +34,6 @@ static void setup_fec(void) setbits_le32(&gpr->gpr[1], BIT(22)); }
-static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} - #if CONFIG_IS_ENABLED(NET) int board_phy_config(struct phy_device *phydev) { @@ -61,9 +48,6 @@ int board_init(void) if (CONFIG_IS_ENABLED(FEC_MXC)) setup_fec();
- if (CONFIG_IS_ENABLED(DWC_ETH_QOS)) - setup_eqos(); - return 0; }
diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c index 8971a827df3..0fefdafadfa 100644 --- a/board/freescale/imx8mp_evk/imx8mp_evk.c +++ b/board/freescale/imx8mp_evk/imx8mp_evk.c @@ -29,19 +29,6 @@ static void setup_fec(void) setbits_le32(&gpr->gpr[1], BIT(22)); }
-static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} - #if CONFIG_IS_ENABLED(NET) int board_phy_config(struct phy_device *phydev) { @@ -59,10 +46,6 @@ int board_init(void) setup_fec(); }
- if (CONFIG_IS_ENABLED(DWC_ETH_QOS)) { - ret = setup_eqos(); - } - return ret; }
diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c index c4d86c26a9b..bc8937b366c 100644 --- a/board/gateworks/venice/venice.c +++ b/board/gateworks/venice/venice.c @@ -58,19 +58,6 @@ static int setup_fec(void) return 0; }
-static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} - int board_phy_config(struct phy_device *phydev) { unsigned short val; @@ -115,8 +102,6 @@ int board_init(void)
if (IS_ENABLED(CONFIG_FEC_MXC)) setup_fec(); - if (IS_ENABLED(CONFIG_DWC_ETH_QOS)) - setup_eqos();
return 0; } diff --git a/board/msc/sm2s_imx8mp/sm2s_imx8mp.c b/board/msc/sm2s_imx8mp/sm2s_imx8mp.c index 3913c4f2427..6ccbf02db06 100644 --- a/board/msc/sm2s_imx8mp/sm2s_imx8mp.c +++ b/board/msc/sm2s_imx8mp/sm2s_imx8mp.c @@ -30,19 +30,6 @@ static void setup_fec(void) setbits_le32(&gpr->gpr[1], BIT(22)); }
-static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} - int board_phy_config(struct phy_device *phydev) { if (phydev->drv->config) @@ -54,7 +41,5 @@ int board_init(void) { setup_fec();
- setup_eqos(); - return 0; } diff --git a/board/toradex/verdin-imx8mp/verdin-imx8mp.c b/board/toradex/verdin-imx8mp/verdin-imx8mp.c index 9c2e44a1229..5490d3ed44a 100644 --- a/board/toradex/verdin-imx8mp/verdin-imx8mp.c +++ b/board/toradex/verdin-imx8mp/verdin-imx8mp.c @@ -49,19 +49,6 @@ static void setup_fec(void) setbits_le32(&gpr->gpr[1], BIT(22)); }
-static int setup_eqos(void) -{ - struct iomuxc_gpr_base_regs *gpr = - (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; - - /* set INTF as RGMII, enable RGMII TXC clock */ - clrsetbits_le32(&gpr->gpr[1], - IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16)); - setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21)); - - return set_clk_eqos(ENET_125MHZ); -} - #if IS_ENABLED(CONFIG_NET) int board_phy_config(struct phy_device *phydev) { @@ -78,9 +65,6 @@ int board_init(void) if (IS_ENABLED(CONFIG_FEC_MXC)) setup_fec();
- if (IS_ENABLED(CONFIG_DWC_ETH_QOS)) - ret = setup_eqos(); - return ret; }
participants (2)
-
Marek Vasut -
Sean Anderson