I ran into a problem where the reset was failing except when I enabled debugging support. After talking with Garret Swalling at Spansion I was told that the GL-N series of devices require a 500ns wait for the reset to complete. The below patch adds a 1us delay after all reset commands.

-Aaron Williams

Signed-off-by: Aaron Williams aaron.williams@caviumnetworks.com --- drivers/mtd/cfi_flash.c | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 9ee639e..4bc01f7 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -586,6 +586,7 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector, prompt, info->start[sector], flash_read_long (info, sector, 0)); flash_write_cmd (info, sector, 0, info->cmd_reset); + udelay(1); return ERR_TIMOUT; } udelay (1); /* also triggers watchdog */ @@ -633,6 +634,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, puts ("Vpp Low Error.\n"); } flash_write_cmd (info, sector, 0, info->cmd_reset); + udelay(1); break; default: break; @@ -1496,6 +1498,7 @@ void flash_read_user_serial (flash_info_t * info, void *buffer, int offset, flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); memcpy (dst, src + offset, len); flash_write_cmd (info, 0, 0, info->cmd_reset); + udelay(1); flash_unmap(info, 0, FLASH_OFFSET_USER_PROTECTION, src); }

@@ -1511,6 +1514,7 @@ void flash_read_factory_serial (flash_info_t * info, void *buffer, int offset, flash_write_cmd (info, 0, 0, FLASH_CMD_READ_ID); memcpy (buffer, src + offset, len); flash_write_cmd (info, 0, 0, info->cmd_reset); + udelay(1); flash_unmap(info, 0, FLASH_OFFSET_INTEL_PROTECTION, src); }

@@ -1542,6 +1546,7 @@ static void cfi_reverse_geometry(struct cfi_qry *qry) static void cmdset_intel_read_jedec_ids(flash_info_t *info) { flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); + udelay(1); flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ info->manufacturer_id = flash_read_uchar (info, @@ -1610,6 +1615,7 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + udelay(1); }

static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) @@ -1736,6 +1742,7 @@ void __flash_cmd_reset(flash_info_t *info) * that AMD flash roms ignore the Intel command. */ flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + udelay(1); flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); } void flash_cmd_reset(flash_info_t *info)