Hi all, could someone write briefly the steps needed to debug u-boot with BDI2000? I can-t find documentation about it. On-line docs specify only how to proceed with gdb after that the host bdi is up and configured.
Thank you all!
Mirko
-- Mirko Banchi
e-mail: mk.banchi@gmail.com id-jabber: mk.banchi@jabber.org
PGP key fingerprint:
308F BFB1 4E67 2522 C88E DC69 7631 52ED 32A5 6456
On 08/30/2011 01:59 PM, Mirko Banchi wrote:
Hi all, could someone write briefly the steps needed to debug u-boot with BDI2000? I can-t find documentation about it. On-line docs specify only how to proceed with gdb after that the host bdi is up and configured.
http://www.denx.de/wiki/view/DULG/DebuggingUBoot
To set up the BDI2000 please refer to the Abatron manual.
Best regards, Stefano Babic
Dear Mirko Banchi,
In message 659ACFBD-2B5D-4F28-89BF-5473D90ADFA5@gmail.com you wrote:
Hi all, could someone write briefly the steps needed to debug u-boot with BDI2000? I can-t find documentation about it. On-line docs specify only how to proceed with gdb after that the host bdi is up and configured.
Could you please explain which information you consider missing in these sections of the manual?
10.1. Debugging of U-Boot
10.1.1. Debugging of U-Boot Before Relocation 10.1.2. Debugging of U-Boot After Relocation
Best regards,
Wolfgang Denk
Il giorno 30/ago/2011, alle ore 14.55, Wolfgang Denk ha scritto:
Dear Mirko Banchi,
In message 659ACFBD-2B5D-4F28-89BF-5473D90ADFA5@gmail.com you wrote:
Hi all, could someone write briefly the steps needed to debug u-boot with BDI2000? I can-t find documentation about it. On-line docs specify only how to proceed with gdb after that the host bdi is up and configured.
Could you please explain which information you consider missing in these sections of the manual?
10.1. Debugging of U-Boot
10.1.1. Debugging of U-Boot Before Relocation 10.1.2. Debugging of U-Boot After Relocation
In those sections of the manual there is explained only how to specify the remote target for gdb and the steps for debugging when the BDI is already configured. From those documents i think is not clear how to configure the environment for bdi. Maybe a note about the existence of Abatron manual could be useful.
Thank you.
Mirko
-- Mirko Banchi
e-mail: mk.banchi@gmail.com id-jabber: mk.banchi@jabber.org
PGP key fingerprint:
308F BFB1 4E67 2522 C88E DC69 7631 52ED 32A5 6456
Dear Mirko Banchi,
In message 857D4443-39B6-43B0-B269-BB6CE7C9AC4E@gmail.com you wrote:
Could you please explain which information you consider missing in these sections of the manual?
10.1. Debugging of U-Boot
10.1.1. Debugging of U-Boot Before Relocation 10.1.2. Debugging of U-Boot After Relocation
In those sections of the manual there is explained only how to specify the remote target for gdb and the steps for debugging when the BDI is already configured. From those documents i think is not clear how to configure the environment for bdi. Maybe a note about the existence of Abatron manual could be useful.
You mean you did not find the manual when unpacking your BDI3000?
Strange.
Sorry, but no, I don't think adding information on this level would be appropriate here. The DULG deals with U-Boot and Linux; configuration of your JTAG debugger is a different topic which gets covered by the manuals of your debugger's provider.
Best regards,
Wolfgang Denk
participants (3)
-
Mirko Banchi -
Stefano Babic -
Wolfgang Denk