The hummingboard2 is slightly different to the cubox i and to the hummingboard. The GPIO pin info to probe came from solidruns for of u-boot on github. https://github.com/SolidRun/u-boot-imx6/blob/imx6/board/solidrun/mx6_cubox-i... I have tested on a hummingboard-edge witha imx6 solo and 512mb of ram.

Signed-off-by: Dennis Gilmore dgilmore@redhat.com --- board/solidrun/mx6cuboxi/mx6cuboxi.c | 35 +++++++++++++++++++++++++++++++++-- include/configs/mx6cuboxi.h | 4 ++++ 2 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c index 7e59fb259e..32d1465d8b 100644 --- a/board/solidrun/mx6cuboxi/mx6cuboxi.c +++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c @@ -349,6 +349,7 @@ static bool is_hummingboard(void) * Machine selection - * Machine val1, val2 * ------------------------- + * HB2 x x * HB rev 3.x x 0 * CBi 0 1 * HB 1 1 @@ -362,9 +363,37 @@ static bool is_hummingboard(void) return true; }

+static bool is_hummingboard2(void) +{ + int val1; + + SETUP_IOMUX_PADS(hb_cbi_sense); + + gpio_direction_input(IMX_GPIO_NR(2, 8)); + + val1 = gpio_get_value(IMX_GPIO_NR(2, 8)); + + /* + * Machine selection - + * Machine val1 + * ------------------- + * HB2 0 + * HB rev 3.x x + * CBi x + * HB x + */ + + if (val1 == 0) + return true; + else + return false; +} + int checkboard(void) { - if (is_hummingboard()) + if (is_hummingboard2()) + puts("Board: MX6 Hummingboard2\n"); + else if (is_hummingboard()) puts("Board: MX6 Hummingboard\n"); else puts("Board: MX6 Cubox-i\n"); @@ -375,7 +404,9 @@ int checkboard(void) int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG - if (is_hummingboard()) + if (is_hummingboard2()) + env_set("board_name", "HUMMINGBOARD2"); + else if (is_hummingboard()) env_set("board_name", "HUMMINGBOARD"); else env_set("board_name", "CUBOXI"); diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 5930f591cb..ce9b5469ee 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -108,6 +108,10 @@ "fi; " \ "fi\0" \ "findfdt="\ + "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6Q ; then " \ + "setenv fdtfile imx6q-hummingboard2.dtb; fi; " \ + "if test $board_name = HUMMINGBOARD2 && test $board_rev = MX6DL ; then " \ + "setenv fdtfile imx6dl-hummingboard2.dtb; fi; " \ "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \ "setenv fdtfile imx6q-hummingboard.dtb; fi; " \ "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \