The omap3.dtsi file shows the usbhshost node with two sub-nodes for ohci and ehci. This patch file creates the usbhshost, and pulls the portX-mode information. It then locates the EHCI sub-node, and initializes the EHCI controller with the info pulled from the usbhshost node.

There is still more to do since there isn't an actual link between the 'phys' reference and the corresponding phy driver, and there is no nop-xceiv driver yet.

In the meantime, the older style reference to CONFIG_OMAP_EHCI_PHYx_RESET_GPIO is still needed to pull the phy out of reset until the phy driver is completed and the phandle reference is made.

Signed-off-by: Adam Ford aford173@gmail.com --- V3: The omap3 device tree shows a parent node called usbhshost and a subnode called usbhsehci. V3 splits this into two different drivers: one for the parent which initializes the HCD, and one for the actual EHCI node, which registers the EHCI when 'start usb' is used.

This simplifies both drivers so each only has one task, eliminates one extra #ifdef by moving some of the code around to make it easier to read, refines the code that checks each port type, and lets the EHCI probe handle the return code from ehci_register.

V2: Rebase on master. There was some discussion a year ago, but I could not replicate the build issues on Travis, and Heiko beleives it was related to a different patch. I'd like to at least get the EHCI working again for device tree enabled omap3 boards using the EHCI controller. We can progressively add features/functions as we go. This as been tested to work on both the AM3517-EVM and the Logic PD SOM-LV.

diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h index 1549f7bf21..f970bba937 100644 --- a/arch/arm/include/asm/ehci-omap.h +++ b/arch/arm/include/asm/ehci-omap.h @@ -123,6 +123,7 @@ struct omap_ehci { u32 insreg08; /* 0xb0 */ };

+#if !CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL) /* * FIXME: forward declaration of this structs needed because omap got the * ehci implementation backwards. move out ehci_hcd_x from board files @@ -133,5 +134,6 @@ struct ehci_hcor; int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata, struct ehci_hccr **hccr, struct ehci_hcor **hcor); int omap_ehci_hcd_stop(void); +#endif

#endif /* _OMAP_COMMON_EHCI_H_ */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index ab459c8cc9..ac44010c85 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -18,6 +18,10 @@ #include <asm/gpio.h> #include <asm/arch/ehci.h> #include <asm/ehci-omap.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <dm/lists.h> +#include <power/regulator.h>

#include "ehci.h"

@@ -177,9 +181,17 @@ int omap_ehci_hcd_stop(void) * Based on "drivers/usb/host/ehci-omap.c" from Linux 3.1 * See there for additional Copyrights. */ +#if !CONFIG_IS_ENABLED(DM_USB) || !CONFIG_IS_ENABLED(OF_CONTROL) + int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { + *hccr = (struct ehci_hccr *)(OMAP_EHCI_BASE); + *hcor = (struct ehci_hcor *)(OMAP_EHCI_BASE + 0x10); +#else +int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata) +{ +#endif int ret; unsigned int i, reg = 0, rev = 0;

@@ -286,9 +298,114 @@ int omap_ehci_hcd_init(int index, struct omap_usbhs_board_data *usbhs_pdata, if (is_ehci_phy_mode(usbhs_pdata->port_mode[i])) omap_ehci_soft_phy_reset(i);

- *hccr = (struct ehci_hccr *)(OMAP_EHCI_BASE); - *hcor = (struct ehci_hcor *)(OMAP_EHCI_BASE + 0x10); - debug("OMAP EHCI init done\n"); return 0; } + +#if CONFIG_IS_ENABLED(DM_USB) + +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +static void omap_usbhs_set_mode(u8 index, const char *mode) +{ + if (!strcmp(mode, "ehci-phy")) + usbhs_bdata.port_mode[index] = OMAP_EHCI_PORT_MODE_PHY; + else if (!strcmp(mode, "ehci-tll")) + usbhs_bdata.port_mode[index] = OMAP_EHCI_PORT_MODE_TLL; + else if (!strcmp(mode, "ehci-hsic")) + usbhs_bdata.port_mode[index] = OMAP_EHCI_PORT_MODE_HSIC; +} + +static int omap_usbhs_probe(struct udevice *dev) +{ + u8 i; + const char *mode; + char prop[11]; + + /* Go through each port portX-mode to determing phy mode */ + for (i = 0; i < OMAP_HS_USB_PORTS; i++) { + snprintf(prop, sizeof(prop), "port%d-mode", i + 1); + mode = dev_read_string(dev, prop); + + /* If the portX-mode exists, set the mode */ + if (mode) + omap_usbhs_set_mode(i, mode); + } + + return omap_ehci_hcd_init(0, &usbhs_bdata); +} + +static const struct udevice_id omap_usbhs_dt_ids[] = { + { .compatible = "ti,usbhs-host" }, + { } +}; + +U_BOOT_DRIVER(usb_omaphs_host) = { + .name = "usbhs-host", + .id = UCLASS_SIMPLE_BUS, + .of_match = omap_usbhs_dt_ids, + .probe = omap_usbhs_probe, + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; + +struct ehci_omap_priv_data { + struct ehci_ctrl ctrl; + struct omap_ehci *ehci; +#ifdef CONFIG_DM_REGULATOR + struct udevice *vbus_supply; +#endif + enum usb_init_type init_type; + int portnr; + struct phy phy[OMAP_HS_USB_PORTS]; + int nports; +}; + +static int ehci_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct usb_platdata *plat = dev_get_platdata(dev); + + plat->init_type = USB_INIT_HOST; + + return 0; +} + +static int omap_ehci_probe(struct udevice *dev) +{ + struct usb_platdata *plat = dev_get_platdata(dev); + struct ehci_omap_priv_data *priv = dev_get_priv(dev); + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + + priv->ehci = (struct omap_ehci *)devfdt_get_addr(dev); + priv->portnr = dev->seq; + priv->init_type = plat->init_type; + + hccr = (struct ehci_hccr *)&priv->ehci->hccapbase; + hcor = (struct ehci_hcor *)&priv->ehci->usbcmd; + + return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); +} + +static const struct udevice_id omap_ehci_dt_ids[] = { + { .compatible = "ti,ehci-omap" }, + { } +}; + +U_BOOT_DRIVER(usb_omap_ehci) = { + .name = "omap-ehci", + .id = UCLASS_USB, + .of_match = omap_ehci_dt_ids, + .probe = omap_ehci_probe, + .ofdata_to_platdata = ehci_usb_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct ehci_omap_priv_data), + .remove = ehci_deregister, + .ops = &ehci_usb_ops, + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; + +#endif