[U-Boot-Users] Boot loader for blackfin processor
Hello, I need help to implement the bootloader.
I am planning to write a boot loader for the blackfin (ADSP-BF535) processor. i am planning to use the U-boot framework for that. i gone through the README file. i didnt get clear idea. Can u give me some brief note. i am planning to have the boot loader in to Flash(272K x 16) and i am going to implement the netboot also. so i need to have network support driver and application. and console. can anyone give step by step procedure.
can u help me how to start . where to start. if u have any more documents or any referrence related to bootloaders.
Thanks and regards Ganapathi C
Dear Ganapathi,
in message 008701c3c9e6$32d49700$af00a8c0@tidelpark.isofttechindia.com you wrote:
I am planning to write a boot loader for the blackfin (ADSP-BF535)processor. i am planning to use the U-boot framework for that. i gone
You are welcome.
through the README file. i didnt get clear idea. Can u give me some
Read the sources, then, and the DULG at http://www.denx.de/twiki/bin/view/DULG/Manual
brief note. i am planning to have the boot loader in to Flash(272K x 16) and i am going to implement the netboot also. so i need to have network support driver and application. and console.
All this is there in U-Boot.
can anyone give step by step procedure.
See section "U-Boot Porting Guide" in the README
can u help me how to start . where to start. if u have any more documents or any referrence related to bootloaders.
Search google for "bootloader" ;-)
------=_NextPart_000_0063_01C3CA12.594F30D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
And PLEASE: don't post HTML messages.
Send plain text only.
Best regards,
Wolfgang Denk
participants (2)
-
ganapathi -
Wolfgang Denk