After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly.

Signed-off-by: Fabio Estevam festevam@gmail.com --- board/warp7/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/warp7/README b/board/warp7/README index 60339da543..dcad61fd3d 100644 --- a/board/warp7/README +++ b/board/warp7/README @@ -48,7 +48,7 @@ Run the DFU command:

Transfer u-boot.imx that will be flashed into the eMMC:

-$ sudo dfu-util -D u-boot.imx -a boot +$ sudo dfu-util -D u-boot-dtb.imx -a boot

Then on the U-Boot prompt the following message should be seen after a successful upgrade: