Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards.

Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Nobuhiro Iwamatsu iwamatsu@nigauri.org --- arch/arm/dts/salvator-common.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/salvator-common.dtsi b/arch/arm/dts/salvator-common.dtsi index 0a0963a0a9..fb05da5e83 100644 --- a/arch/arm/dts/salvator-common.dtsi +++ b/arch/arm/dts/salvator-common.dtsi @@ -575,7 +575,10 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + + max-frequency = <208000000>; };

&sdhi2 { @@ -587,9 +590,12 @@ vmmc-supply = <&reg_3p3v>; vqmmc-supply = <&reg_1p8v>; bus-width = <8>; + mmc-ddr-1_8v; mmc-hs200-1_8v; non-removable; status = "okay"; + + max-frequency = <200000000>; };

&sdhi3 { @@ -603,7 +609,10 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; + + max-frequency = <208000000>; };

&ssi1 {