There are uQE on ls1043ardb board, add uQE support for the board. Call u_qe_init in ls1043ardb's board_init.

Signed-off-by: Zhao Qiang qiang.zhao@nxp.com --- Changes for v2: - get qe_immr directly instead of qe_base Changes for v3: - NA Changes for v4: - NA Changes for v5: - rebase on patch http://patchwork.ozlabs.org/patch/572697/ - modify commit message

board/freescale/ls1043ardb/ls1043ardb.c | 8 ++++++++ drivers/qe/qe.c | 6 ++---- include/configs/ls1043ardb.h | 7 +++++++ 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index c8f723a..2e61f3a 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -21,6 +21,10 @@ #include <environment.h> #include <fsl_sec.h> #include "cpld.h" +#ifdef CONFIG_U_QE +#include <fsl_qe.h> +#endif +

DECLARE_GLOBAL_DATA_PTR;

@@ -113,6 +117,10 @@ int board_init(void) enable_layerscape_ns_access(); #endif

+#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; }

diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 2a9e61b..8a432a8 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -192,8 +192,7 @@ void qe_init(uint qe_base) #ifdef CONFIG_U_QE void u_qe_init(void) { - uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ - qe_immr = (qe_map_t *)qe_base; + qe_immr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET);

u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); out_be32(&qe_immr->iram.iready, QE_IRAM_READY); @@ -204,9 +203,8 @@ void u_qe_init(void) void u_qe_resume(void) { qe_map_t *qe_immrr; - uint qe_base = CONFIG_SYS_IMMR + QE_IMMR_OFFSET; /* QE immr base */ - qe_immrr = (qe_map_t *)qe_base;

+ qe_immrr = (qe_map_t *)(CONFIG_SYS_IMMR + QE_IMMR_OFFSET); u_qe_firmware_resume((const void *)CONFIG_SYS_QE_FW_ADDR, qe_immrr); out_be32(&qe_immrr->iram.iready, QE_IRAM_READY); } diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 506f50d..bc40b06 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -268,6 +268,13 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif

+/* QE */ +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ + !defined(CONFIG_QSPI_BOOT) +#define CONFIG_U_QE +#endif +#define CONFIG_SYS_QE_FW_ADDR 0x60600000 + /* USB */ #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB

Pin-muxing code should be in config_board_mux, move USB muxing config to config_board_mux.

Signed-off-by: Zhao Qiang qiang.zhao@nxp.com --- Changes for v2: - NA Changes for v3: - split from "[PATCH v2 3/3] QE: assgin pins to QE-HDLC" Changes for v4: - NA Changes for v5: - modify the commit message

board/freescale/ls1043ardb/ls1043ardb.c | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 2e61f3a..dafe7c9 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -75,23 +75,8 @@ int dram_init(void)

int board_early_init_f(void) { - struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; - u32 usb_pwrfault; - fsl_lsch2_early_init_f();

-#ifdef CONFIG_HAS_FSL_XHCI_USB - out_be32(&scfg->rcwpmuxcr0, 0x3333); - out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); - usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB3_SHIFT) | - (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB2_SHIFT) | - (SCFG_USBPWRFAULT_SHARED << - SCFG_USBPWRFAULT_USB1_SHIFT); - out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); -#endif - return 0; }

@@ -126,6 +111,21 @@ int board_init(void)

int config_board_mux(void) { + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + u32 usb_pwrfault; + +#ifdef CONFIG_HAS_FSL_XHCI_USB + out_be32(&scfg->rcwpmuxcr0, 0x3333); + out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); + usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << + SCFG_USBPWRFAULT_USB1_SHIFT); + out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); +#endif + return 0; }

QE-HDLC and USB multi-use the pins, modify the pin-muxing code for them, when set "hwconfig=qe-hdlc" in uboot, assign the pins to QE-HDLC, if not, assgin it to USB

Signed-off-by: Zhao Qiang qiang.zhao@nxp.com --- Changes for v2: - NA Changes for v3: - split from "[PATCH v2 3/3] QE: assgin pins to QE-HDLC" Changes for v4: - modify the format of multi-line comments Changes for v5: - modify the commit message

board/freescale/ls1043ardb/ls1043ardb.c | 53 ++++++++++++++++++++++++++------- 1 file changed, 43 insertions(+), 10 deletions(-)

diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index dafe7c9..66d974a 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -114,18 +114,24 @@ int config_board_mux(void) struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; u32 usb_pwrfault;

+ if (hwconfig("qe-hdlc")) { + out_be32(&scfg->rcwpmuxcr0, + (in_be32(&scfg->rcwpmuxcr0) & ~0xff00) | 0x6600); + printf("Assign to qe-hdlc clk, rcwpmuxcr0=%x\n", + in_be32(&scfg->rcwpmuxcr0)); + } else { #ifdef CONFIG_HAS_FSL_XHCI_USB - out_be32(&scfg->rcwpmuxcr0, 0x3333); - out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); - usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB3_SHIFT) | - (SCFG_USBPWRFAULT_DEDICATED << - SCFG_USBPWRFAULT_USB2_SHIFT) | - (SCFG_USBPWRFAULT_SHARED << - SCFG_USBPWRFAULT_USB1_SHIFT); - out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); + out_be32(&scfg->rcwpmuxcr0, 0x3333); + out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1); + usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB3_SHIFT) | + (SCFG_USBPWRFAULT_DEDICATED << + SCFG_USBPWRFAULT_USB2_SHIFT) | + (SCFG_USBPWRFAULT_SHARED << + SCFG_USBPWRFAULT_USB1_SHIFT); + out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault); #endif - + } return 0; }

@@ -152,6 +158,16 @@ int misc_init_r(void) } #endif

+void fdt_del_qe(void *blob) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compatible(blob, 0, + "fsl,qe")) >= 0) { + fdt_del_node(blob, nodeoff); + } +} + int ft_board_setup(void *blob, bd_t *bd) { u64 base[CONFIG_NR_DRAM_BANKS]; @@ -169,6 +185,23 @@ int ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_SYS_DPAA_FMAN fdt_fixup_fman_ethernet(blob); #endif + + /* + * qe-hdlc and usb multi-use the pins, + * when set hwconfig to qe-hdlc, delete usb node. + */ + if (hwconfig("qe-hdlc")) +#ifdef CONFIG_HAS_FSL_XHCI_USB + fdt_del_node_and_alias(blob, "usb1"); +#endif + /* + * qe just support qe-uart and qe-hdlc, + * if qe-uart and qe-hdlc are not set in hwconfig, + * delete qe node. + */ + if (!hwconfig("qe-uart") && !hwconfig("qe-hdlc")) + fdt_del_qe(blob); + return 0; }