Hello,

I can't seem to get my USB keyboard working. USB storage devices work fine. Does anyone have any suggestions on how to fix this? I've issued `usb start` and then `env set input serial,nc,usbkbd`

I'm running U-Boot 2014.07-rc1-15746-g3a56482 from the -imx tree.

The `usb tree` command shows: USB device tree:   1  Hub (480 Mb/s, 0mA)   |  u-boot EHCI Host Controller    |   +-2  Hub (480 Mb/s, 100mA)     |   USB2.0 Hub      |     +-3  Human Interface (1.5 Mb/s, 100mA)     |    Chicony Saitek Eclipse II Keyboard      |       +-4  Mass Storage (480 Mb/s, 200mA)     |    PNY USB 2.0 FD 020093054CD3693E     |       +-5  Vendor specific (480 Mb/s, 500mA)          Realtek 802.11n NIC 00E04C0001

And the `usb info 3` command shows: config for device 3 3: Human Interface,  USB Revision 2.0  - Chicony Saitek Eclipse II Keyboard   - Class: (from Interface) Human Interface  - PacketSize: 8  Configurations: 1  - Vendor: 0x06a3  Product 0x8021 Version 1.16    Configuration: 1    - Interfaces: 2 Bus Powered Remote Wakeup 100mA      Interface: 0      - Alternate Setting 0, Endpoints: 1      - Class Human Interface, Subclass: Boot Keyboard      - Endpoint 1 In Interrupt MaxPacket 8 Interval 10ms      Interface: 1      - Alternate Setting 0, Endpoints: 1      - Class Human Interface, Subclass: None      - Endpoint 2 In Interrupt MaxPacket 4 Interval 10ms

And the `coninfo` command shows: List of available devices: vga      80000002 S.O stdout stderr  serial   80000003 SIO  nulldev  80000003 SIO  mxc_serial 00000003 .IO  nc       80000003 SIO  usbkbd   80000001 SI. stdin

And `usb start` shows: (Re)start USB... USB0:   lowlevel init failed USB1:   USB EHCI 1.00 scanning bus 1 for devices... 5 USB Device(s) found        scanning usb for storage devices... 1 Storage Device(s) found

I have: #define CONFIG_CONSOLE_MUX #define CONFIG_SYS_CONSOLE_IS_IN_ENV

/* USB Configs */ #define CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MX6 #define CONFIG_USB_STORAGE #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */ #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS    0 #define CONFIG_USB_KEYBOARD