Commit 90b7fc924adf "net: designware: support phy reset device-tree bindings" made DW GMAC driver dependent on DM_GPIO by unconditional usage of purely DM_GPIO stuff like: * dm_gpio_XXX() * gpio_request_by_name()

But since that driver as of today might be easily used without DM_GPIO (that's the case for Synopsys AXS10x boards) we're shielding all DM_GPIO things by ifdefs.

Signed-off-by: Alexey Brodkin abrodkin@synopsys.com Cc: Simon Glass sjg@chromium.org Cc: Beniamino Galvani b.galvani@gmail.com Cc: Joe Hershberger joe.hershberger@ni.com Cc: Sjoerd Simons sjoerd.simons@collabora.co.uk Cc: Sonic Zhang sonic.zhang@analog.com Cc: Bin Meng bmeng.cn@gmail.com Cc: Marek Vasut marex@denx.de --- drivers/net/designware.c | 10 ++++++++-- drivers/net/designware.h | 7 ++++++- 2 files changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 8858f07..8ba72e3 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -80,7 +80,7 @@ static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, return ret; }

-#if CONFIG_DM_ETH +#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO) static int dw_mdio_reset(struct mii_dev *bus) { struct udevice *dev = bus->priv; @@ -126,7 +126,7 @@ static int dw_mdio_init(const char *name, void *priv) bus->read = dw_mdio_read; bus->write = dw_mdio_write; snprintf(bus->name, sizeof(bus->name), "%s", name); -#ifdef CONFIG_DM_ETH +#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_GPIO) bus->reset = dw_mdio_reset; #endif

@@ -690,11 +690,15 @@ static const struct eth_ops designware_eth_ops = { static int designware_eth_ofdata_to_platdata(struct udevice *dev) { struct dw_eth_pdata *dw_pdata = dev_get_platdata(dev); +#ifdef CONFIG_DM_GPIO struct dw_eth_dev *priv = dev_get_priv(dev); +#endif struct eth_pdata *pdata = &dw_pdata->eth_pdata; const char *phy_mode; const fdt32_t *cell; +#ifdef CONFIG_DM_GPIO int reset_flags = GPIOD_IS_OUT; +#endif int ret = 0;

pdata->iobase = dev_get_addr(dev); @@ -712,6 +716,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) if (cell) pdata->max_speed = fdt32_to_cpu(*cell);

+#ifdef CONFIG_DM_GPIO if (fdtdec_get_bool(gd->fdt_blob, dev->of_offset, "snps,reset-active-low")) reset_flags |= GPIOD_ACTIVE_LOW; @@ -724,6 +729,7 @@ static int designware_eth_ofdata_to_platdata(struct udevice *dev) } else if (ret == -ENOENT) { ret = 0; } +#endif

return ret; } diff --git a/drivers/net/designware.h b/drivers/net/designware.h index 51ba769..d345c5b 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -8,7 +8,9 @@ #ifndef _DW_ETH_H #define _DW_ETH_H

-#include <asm/gpio.h> +#ifdef CONFIG_DM_GPIO +#include <asm-generic/gpio.h> +#endif

#define CONFIG_TX_DESCR_NUM 16 #define CONFIG_RX_DESCR_NUM 16 @@ -234,7 +236,10 @@ struct dw_eth_dev { #ifndef CONFIG_DM_ETH struct eth_device *dev; #endif +#ifdef CONFIG_DM_GPIO struct gpio_desc reset_gpio; +#endif + struct phy_device *phydev; struct mii_dev *bus; };