This patch introduces CONFIG_RTL8211X_PHY_FORCE_MASTER. If this define is set, RTL8211x PHYs (except for the RTL8211F) will have their 1000BASE-T master/slave autonegotiation disabled and forced to master mode.

This is helpful for PHYs like the RTL8211C which produce unstable links in slave mode. Such problems have been found on the A20-Olimex-SOM-EVB and A20-OLinuXino-Lime2.

There is no proper way to identify affected PHYs in software as the RTL8211C shares its UID with the RTL8211B. Thus, this fix requires the introduction of an #ifdef.

CC: fradav@gmail.com CC: merker@debian.org CC: hdegoede@redhat.com CC: ijc@hellion.org.uk CC: joe.hershberger@ni.com

Signed-off-by: Michael Haas haas@computerlinguist.org Tested-by: Karsten Merker merker@debian.org

---

Changes in v5: - Improve formatting of Kconfig help text. No content change. Change suggested by Karsten Merker.

Changes in v4: - Squashed previously separate commit introducing KCONFIG variable into commit containing main code change (Hans de Goede's suggestion) - Changed KCONFIG description according to Karsten Merker's suggestions plus some clarification of my own - Changed commit message according to Karsten Merker's suggestions

Changes in v3: - Remove incorrect detection of RTL8211CL and use #ifdef instead (thanks to Karsten Merker) - Introduced constants for register bits

Changes in v2: - Removed accidental inclusion of Karsten's patch in my first submission of this series. - Fix a typo in the code: 6 -> &

drivers/net/Kconfig | 21 +++++++++++++++++++++ drivers/net/phy/realtek.c | 13 ++++++++++++- 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2a229b8..e0008fd 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -13,6 +13,27 @@ config PHYLIB help Enable Ethernet PHY (physical media interface) support.

+config RTL8211X_PHY_FORCE_MASTER + bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" + depends on PHYLIB + help + Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). + This can work around link stability and data corruption issues on gigabit + links which can occur in slave mode on certain PHYs, e.g. on the + RTL8211C(L). + + Please note that two directly connected devices (i.e. via crossover cable) + will not be able to establish a link between each other if they both force + master mode. Multiple devices forcing master mode when connected by a + network switch do not pose a problem as the switch configures its affected + ports into slave mode. + + This option only affects gigabit links. If you must establish a direct + connection between two devices which both force master mode, try forcing + the link speed to 100MBit/s. + + If unsure, say N. + menuconfig NETDEVICES bool "Network device support" depends on NET diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 259a87f..359ec50 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -12,6 +12,10 @@

#define PHY_AUTONEGOTIATE_TIMEOUT 5000

+/* RTL8211x 1000BASE-T Control Register */ +#define MIIM_RTL8211x_CTRL1000T_MSCE (1 << 12); +#define MIIM_RTL8211X_CTRL1000T_MASTER (1 << 11); + /* RTL8211x PHY Status Register */ #define MIIM_RTL8211x_PHY_STATUS 0x11 #define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000 @@ -53,7 +57,14 @@ static int rtl8211x_config(struct phy_device *phydev) */ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER, MIIM_RTL8211x_PHY_INTR_DIS); - +#ifdef CONFIG_RTL8211X_PHY_FORCE_MASTER + unsigned int reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000); + /* force manual master/slave configuration */ + reg |= MIIM_RTL8211x_CTRL1000T_MSCE; + /* force master mode */ + reg |= MIIM_RTL8211X_CTRL1000T_MASTER; + phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, reg); +#endif /* read interrupt status just to clear it */ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_INER);

Force master mode for 1000BASE-T operation on the A20-Olimex-SOM-EVB.

Karsten Merker reports that this change is necessary to get a reliable link at gigabit speeds.

Signed-off-by: Michael Haas haas@computerlinguist.org

---

Changes in v5: - Fix order of defconfig entry (suggested by Karsten Marker) Series-changes: 4 - Changed commit summary according to Chen-Yu Tsai's suggestion, modified to fit the 70 character limit

Changes in v4: None Changes in v3: None Changes in v2: None

configs/A20-Olimex-SOM-EVB_defconfig | 1 + 1 file changed, 1 insertion(+)

diff --git a/configs/A20-Olimex-SOM-EVB_defconfig b/configs/A20-Olimex-SOM-EVB_defconfig index 66d8f98..bcfbf9c 100644 --- a/configs/A20-Olimex-SOM-EVB_defconfig +++ b/configs/A20-Olimex-SOM-EVB_defconfig @@ -17,5 +17,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_CMD_GPIO=y +CONFIG_RTL8211X_PHY_FORCE_MASTER=y CONFIG_ETH_DESIGNWARE=y CONFIG_USB_EHCI_HCD=y