[U-Boot] Zynq: Unable to boot from MMC
Hi Michal,
I'm unable to boot the zynq board from MMC, here is my trails: 1. zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin copied boot.bin and u-boot-dtb.img on to sd card
2. zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl.bin copied boot.bin and u-boot.img on to sd card
For both above steps, board is not booting - I was checked on top of master and step 2 succeeded with u-boot-xlnx[1]
Could you please help?
[1] https://github.com/Xilinx/u-boot-xlnx
Hi Jagan,
On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki jteki@openedev.com wrote:
Hi Michal,
I'm unable to boot the zynq board from MMC, here is my trails:
- zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
copied boot.bin and u-boot-dtb.img on to sd card
try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into this friday and was pointed to that by a colleague.
Cheers,
Moritz
Hi Moritz,
On 23 November 2015 at 01:15, Moritz Fischer moritz.fischer@ettus.com wrote:
Hi Jagan,
On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki jteki@openedev.com wrote:
Hi Michal,
I'm unable to boot the zynq board from MMC, here is my trails:
- zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
copied boot.bin and u-boot-dtb.img on to sd card
try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into this friday and was pointed to that by a colleague.
Still the same issue, here is the reverted commit
Revert "board_init: Change the logic to setup malloc_base"
This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82.
Hi Jagan,
On 23.11.2015 10:20, Jagan Teki wrote:
Hi Moritz,
On 23 November 2015 at 01:15, Moritz Fischer moritz.fischer@ettus.com wrote:
Hi Jagan,
On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki jteki@openedev.com wrote:
Hi Michal,
I'm unable to boot the zynq board from MMC, here is my trails:
- zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
copied boot.bin and u-boot-dtb.img on to sd card
try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into this friday and was pointed to that by a colleague.
Still the same issue, here is the reverted commit
Revert "board_init: Change the logic to setup malloc_base" This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82.
I have reported problem with SPL in my pull request to Tom last week. I have tested current HEAD. When you revert that sha1 reported above it is just working directly in MMC bootmode on zc702.
On Friday Philip tried the same on zedboard and it was working fine for him too.
I still don't know exactly where the problem is because I haven't spent on it any time - just bisecting commit ID which was the first broken one.
Thanks, Michal
On 23.11.2015 11:27, Michal Simek wrote:
Hi Jagan,
On 23.11.2015 10:20, Jagan Teki wrote:
Hi Moritz,
On 23 November 2015 at 01:15, Moritz Fischer moritz.fischer@ettus.com wrote:
Hi Jagan,
On Sun, Nov 22, 2015 at 6:25 AM, Jagan Teki jteki@openedev.com wrote:
Hi Michal,
I'm unable to boot the zynq board from MMC, here is my trails:
- zynq-boot-bin.py -o boot.bin -u spl/u-boot-spl-dtb.bin
copied boot.bin and u-boot-dtb.img on to sd card
try reverting 9ac4fc82071ce346e3885118242ff45d22f69b82. I ran into this friday and was pointed to that by a colleague.
Still the same issue, here is the reverted commit
Revert "board_init: Change the logic to setup malloc_base" This reverts commit 9ac4fc82071ce346e3885118242ff45d22f69b82.I have reported problem with SPL in my pull request to Tom last week. I have tested current HEAD. When you revert that sha1 reported above it is just working directly in MMC bootmode on zc702.
On Friday Philip tried the same on zedboard and it was working fine for him too.
I still don't know exactly where the problem is because I haven't spent on it any time - just bisecting commit ID which was the first broken one.
Look at this patch I have just sent. ARM: zynq: Fix location of stack and malloc areas
Thanks, Michal
participants (4)
-
Jagan Teki -
Michal Simek -
Michal Simek -
Moritz Fischer