This patch adds basic support for Broadcom BCM5481 PHY.

RXD-RXC delay quirk comes from MPC8360E-RDK BSP source, author is Peter Barada peterb@logicpd.com.

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- drivers/qe/uec_phy.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 files changed, 41 insertions(+), 0 deletions(-)

diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 8c4a558..423ba78 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -347,6 +347,37 @@ static int genmii_read_status (struct uec_mii_info *mii_info) return 0; }

+static int bcm_init(struct uec_mii_info *mii_info) +{ + struct eth_device *edev = mii_info->dev; + uec_private_t *uec = edev->priv; + + gbit_config_aneg(mii_info); + + if (uec->uec_info->enet_interface == ENET_1000_RGMII_RXID) { + u16 val; + int cnt = 50; + + /* Wait for aneg to complete. */ + do + val = phy_read(mii_info, PHY_BMSR); + while (--cnt && !(val & PHY_BMSR_AUTN_COMP)); + + /* Set RDX clk delay. */ + phy_write(mii_info, 0x18, 0x7 | (7 << 12)); + + val = phy_read(mii_info, 0x18); + /* Set RDX-RXC skew. */ + val |= (1 << 8); + val |= (7 | (7 << 12)); + /* Write bits 14:0. */ + val |= (1 << 15); + phy_write(mii_info, 0x18, val); + } + + return 0; +} + static int marvell_read_status (struct uec_mii_info *mii_info) { u16 status; @@ -515,6 +546,15 @@ static struct phy_info phy_info_marvell = { .config_intr = &marvell_config_intr, };

+static struct phy_info phy_info_bcm5481 = { + .phy_id = 0x0143bca0, + .phy_id_mask = 0xffffff0, + .name = "Broadcom 5481", + .features = MII_GBIT_FEATURES, + .read_status = genmii_read_status, + .init = bcm_init, +}; + static struct phy_info phy_info_genmii = { .phy_id = 0x00000000, .phy_id_mask = 0x00000000, @@ -528,6 +568,7 @@ static struct phy_info *phy_info[] = { &phy_info_dm9161, &phy_info_dm9161a, &phy_info_marvell, + &phy_info_bcm5481, &phy_info_genmii, NULL };

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- board/freescale/mpc8360erdk/Makefile | 4 +- board/freescale/mpc8360erdk/nand.c | 72 ++++++++++++++++++++++++++++++++++ include/configs/MPC8360ERDK.h | 24 +++++++++++ 3 files changed, 99 insertions(+), 1 deletions(-) create mode 100644 board/freescale/mpc8360erdk/nand.c

diff --git a/board/freescale/mpc8360erdk/Makefile b/board/freescale/mpc8360erdk/Makefile index acc9544..53e0c48 100644 --- a/board/freescale/mpc8360erdk/Makefile +++ b/board/freescale/mpc8360erdk/Makefile @@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk

LIB = $(obj)lib$(BOARD).a

-COBJS := $(BOARD).o +COBJS-y += $(BOARD).o +COBJS-$(CONFIG_CMD_NAND) += nand.o

+COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/freescale/mpc8360erdk/nand.c b/board/freescale/mpc8360erdk/nand.c new file mode 100644 index 0000000..e1e790b --- /dev/null +++ b/board/freescale/mpc8360erdk/nand.c @@ -0,0 +1,72 @@ +/* + * MPC8360E-RDK support for the NAND on FSL UPM + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov avorontsov@ru.mvista.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_83xx.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/fsl_upm.h> +#include <nand.h> + +static struct immap *im = (struct immap *)CFG_IMMR; + +static const u32 upm_array[] = { + 0x0ff03c30, 0x0ff03c30, 0x0ff03c34, 0x0ff33c30, /* Words 0 to 3 */ + 0xfff33c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 4 to 7 */ + 0x0faf3c30, 0x0faf3c30, 0x0faf3c30, 0x0fff3c34, /* Words 8 to 11 */ + 0xffff3c31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 12 to 15 */ + 0x0fa3fc30, 0x0fa3fc30, 0x0fa3fc30, 0x0ff3fc34, /* Words 16 to 19 */ + 0xfff3fc31, 0xfffffc30, 0xfffffc30, 0xfffffc30, /* Words 20 to 23 */ + 0x0ff33c30, 0x0fa33c30, 0x0fa33c34, 0x0ff33c30, /* Words 24 to 27 */ + 0xfff33c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30, /* Words 28 to 31 */ + 0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30, /* Words 32 to 35 */ + 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 36 to 39 */ + 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30, /* Words 40 to 43 */ + 0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31, /* Words 44 to 47 */ + 0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 48 to 51 */ + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */ + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */ + 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 60 to 63 */ +}; + +static int dev_ready(void) +{ + if (in_be32(&im->qepio.ioport[4].pdat) & 0x00002000) { + debug("nand ready\n"); + return 1; + } + + debug("nand busy\n"); + return 0; +} + +static struct fsl_upm_nand fun = { + .upm = { + .array = upm_array, + .io_addr = (void *)CFG_NAND_BASE, + }, + .width = 1, + .upm_cmd_offset = 8, + .upm_addr_offset = 16, + .dev_ready = dev_ready, + .wait_pattern = 1, + .chip_delay = 50, +}; + +int board_nand_init(struct nand_chip *nand) +{ + fun.upm.mxmr = &im->lbus.mamr; + fun.upm.mdr = &im->lbus.mdr; + fun.upm.mar = &im->lbus.mar; + return fsl_upm_nand_init(nand, &fun); +} diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 1588610..97797cc 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -184,6 +184,11 @@ * NAND flash on the local bus */ #define CFG_NAND_BASE 0x60000000 +#define CONFIG_CMD_NAND 1 +#define CONFIG_NAND_FSL_UPM 1 +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE

#define CFG_LBLAWBAR1_PRELIM CFG_NAND_BASE #define CFG_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */ @@ -503,23 +508,42 @@ "fdtfile=dtb\0"\ "fsfile=fs\0"\ "ubootfile=u-boot.bin\0"\ + "mtdparts=mtdparts=60000000.nand-flash:4096k(kernel),128k(dtb),-(rootfs)\0"\ "setbootargs=setenv bootargs console=$consoledev,$baudrate "\ "$mtdparts panic=1\0"\ "adddhcpargs=setenv bootargs $bootargs ip=on\0"\ "addnfsargs=setenv bootargs $bootargs ip=$ipaddr:$serverip:"\ "$gatewayip:$netmask:$hostname:$netdev:off "\ "root=/dev/nfs rw nfsroot=$serverip:$rootpath\0"\ + "addnandargs=setenv bootargs $bootargs root=/dev/mtdblock3 "\ + "rootfstype=jffs2 rw\0"\ "tftp_get_uboot=tftp 100000 $ubootfile\0"\ "tftp_get_kernel=tftp $loadaddr $bootfile\0"\ "tftp_get_dtb=tftp $fdtaddr $fdtfile\0"\ "tftp_get_fs=tftp c00000 $fsfile\0"\ + "nand_erase_kernel=nand erase 0 400000\0"\ + "nand_erase_dtb=nand erase 400000 20000\0"\ + "nand_erase_fs=nand erase 420000 3be0000\0"\ + "nand_write_kernel=nand write.jffs2 $loadaddr 0 400000\0"\ + "nand_write_dtb=nand write.jffs2 $fdtaddr 400000 20000\0"\ + "nand_write_fs=nand write.jffs2 c00000 420000 $filesize\0"\ + "nand_read_kernel=nand read.jffs2 $loadaddr 0 400000\0"\ + "nand_read_dtb=nand read.jffs2 $fdtaddr 400000 20000\0"\ "nor_reflash=protect off ff800000 ff87ffff ; erase ff800000 ff87ffff ; "\ "cp.b 100000 ff800000 $filesize\0"\ + "nand_reflash_kernel=run tftp_get_kernel nand_erase_kernel "\ + "nand_write_kernel\0"\ + "nand_reflash_dtb=run tftp_get_dtb nand_erase_dtb nand_write_dtb\0"\ + "nand_reflash_fs=run tftp_get_fs nand_erase_fs nand_write_fs\0"\ + "nand_reflash=run nand_reflash_kernel nand_reflash_dtb "\ + "nand_reflash_fs\0"\ "boot_m=bootm $loadaddr - $fdtaddr\0"\ "dhcpboot=run setbootargs adddhcpargs tftp_get_kernel tftp_get_dtb "\ "boot_m\0"\ "nfsboot=run setbootargs addnfsargs tftp_get_kernel tftp_get_dtb "\ "boot_m\0"\ + "nandboot=run setbootargs addnandargs nand_read_kernel nand_read_dtb "\ + "boot_m\0"\ ""

#define CONFIG_BOOTCOMMAND "run dhcpboot"

Current DDR setup easily causes memory corruption, this patch fixes it.

Also fix TIMING_CFG0_MRS_CYC definition.

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- include/configs/MPC8360ERDK.h | 48 ++++++++++++++++++++++++++++++---------- include/mpc83xx.h | 3 +- 2 files changed, 38 insertions(+), 13 deletions(-)

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 97797cc..ba25a59 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -89,8 +89,8 @@

#define CFG_83XX_DDR_USES_CS0

-#undef CONFIG_DDR_ECC /* support DDR ECC function */ -#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ +#define CONFIG_DDR_ECC /* support DDR ECC function */ +#define CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */

/* * DDRCDR - DDR Control Driver Register @@ -104,20 +104,44 @@ */ #define CONFIG_DDR_II #define CFG_DDR_SIZE 256 /* MB */ -#define CFG_DDRCDR 0x80080001 #define CFG_DDR_CS0_BNDS 0x0000000f #define CFG_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) -#define CFG_DDR_TIMING_0 0x00330903 -#define CFG_DDR_TIMING_1 0x3835a322 -#define CFG_DDR_TIMING_2 0x00104909 -#define CFG_DDR_TIMING_3 0x00000000 -#define CFG_DDR_CLK_CNTL 0x02000000 + CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS) +#define CFG_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | SDRAM_CFG_ECC_EN) +#define CFG_DDR_SDRAM_CFG2 0x00001000 +#define CFG_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CFG_DDR_INTERVAL ((256 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (1115 << SDRAM_INTERVAL_REFINT_SHIFT)) #define CFG_DDR_MODE 0x47800432 #define CFG_DDR_MODE2 0x8000c000 -#define CFG_DDR_INTERVAL 0x045b0100 -#define CFG_DDR_SDRAM_CFG 0x03000000 -#define CFG_DDR_SDRAM_CFG2 0x00001000 + +#define CFG_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (9 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (3 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (3 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CFG_DDR_TIMING_1 (( TIMING_CFG1_CASLAT_30) | \ + ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \ + ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + ( 3 << TIMING_CFG1_WRREC_SHIFT) | \ + (10 << TIMING_CFG1_REFREC_SHIFT) | \ + ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + ( 3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CFG_DDR_TIMING_2 ((9 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (4 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ + (0 << TIMING_CFG2_CPO_SHIFT)) + +#define CFG_DDR_TIMING_3 0x00000000

/* * Memory test diff --git a/include/mpc83xx.h b/include/mpc83xx.h index df052e3..20df166 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -880,7 +880,7 @@ #define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16 #define TIMING_CFG0_ODT_PD_EXIT 0x00000F00 #define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8 -#define TIMING_CFG0_MRS_CYC 0x00000F00 +#define TIMING_CFG0_MRS_CYC 0x0000000F #define TIMING_CFG0_MRS_CYC_SHIFT 0

/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1 @@ -903,6 +903,7 @@ #define TIMING_CFG1_WRTORD_SHIFT 0 #define TIMING_CFG1_CASLAT_20 0x00030000 /* CAS latency = 2.0 */ #define TIMING_CFG1_CASLAT_25 0x00040000 /* CAS latency = 2.5 */ +#define TIMING_CFG1_CASLAT_30 0x00050000 /* CAS latency = 2.5 */

/* TIMING_CFG_2 - DDR SDRAM Timing Configuration 2 */

This is needed to update /choosen/linux,stdout-path properly.

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- include/configs/MPC8360ERDK.h | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 2bf0a35..1b66087 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -259,6 +259,7 @@ /* Pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS

/* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */

device_type = "soc" is being deprecated, newer device trees will use "fsl,soc" and/or "fsl,immr" for the soc nodes.

This patch also adds clock-frequency property for soc nodes (the same value as bus-frequency).

Signed-off-by: Anton Vorontsov avorontsov@ru.mvista.com --- cpu/mpc83xx/fdt.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c index 6f55932..e7be4ee 100644 --- a/cpu/mpc83xx/fdt.c +++ b/cpu/mpc83xx/fdt.c @@ -49,6 +49,14 @@ void ft_cpu_setup(void *blob, bd_t *bd) "clock-frequency", gd->core_clk, 1); do_fixup_by_prop_u32(blob, "device_type", "soc", 4, "bus-frequency", bd->bi_busfreq, 1); + do_fixup_by_compat_u32(blob, "fsl,soc", + "bus-frequency", bd->bi_busfreq, 1); + do_fixup_by_compat_u32(blob, "fsl,soc", + "clock-frequency", bd->bi_busfreq, 1); + do_fixup_by_compat_u32(blob, "fsl,immr", + "bus-frequency", bd->bi_busfreq, 1); + do_fixup_by_compat_u32(blob, "fsl,immr", + "clock-frequency", bd->bi_busfreq, 1); #ifdef CONFIG_QE ft_qe_setup(blob); #endif