From: Mohamed Haneef mohamed.haneef@lntinfotech.com

*Support for msm7x30 interprocessor communication

Signed-off-by: Mohamed Haneef mohamed.haneef@lntinfotech.com --- drivers/misc/Makefile | 1 + drivers/misc/msm_proc_comm.c | 303 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 304 insertions(+), 0 deletions(-) create mode 100644 drivers/misc/msm_proc_comm.c

diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index a709707..b324d73 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -39,6 +39,7 @@ COBJS-$(CONFIG_PMIC_FSL) += pmic_fsl.o COBJS-$(CONFIG_PMIC_I2C) += pmic_i2c.o COBJS-$(CONFIG_PMIC_SPI) += pmic_spi.o COBJS-$(CONFIG_PMIC_MAX8998) += pmic_max8998.o +COBJS-$(CONFIG_MSM_PCOMM) += msm_proc_comm.o

COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/misc/msm_proc_comm.c b/drivers/misc/msm_proc_comm.c new file mode 100644 index 0000000..f1db917 --- /dev/null +++ b/drivers/misc/msm_proc_comm.c @@ -0,0 +1,303 @@ +/* + * (C) Copyright 2012 + * LARSEN & TOUBRO INFOTECH LTD <www.lntinfotech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/iomap.h> +#define ACPU_CLK 0 /* Applications processor clock */ +#define ADM_CLK 1 /* Applications data mover clock */ +#define ADSP_CLK 2 /* ADSP clock */ +#define EBI1_CLK 3 /* External bus interface 1 clock */ +#define EBI2_CLK 4 /* External bus interface 2 clock */ +#define ECODEC_CLK 5 /* External CODEC clock */ +#define EMDH_CLK 6 /* External MDDI host clock */ +#define GP_CLK 7 /* General purpose clock */ +#define GRP_CLK 8 /* Graphics clock */ +#define I2C_CLK 9 /* I2C clock */ +#define ICODEC_RX_CLK 10 /* Internal CODEX RX clock */ +#define ICODEC_TX_CLK 11 /* Internal CODEX TX clock */ +#define IMEM_CLK 12 /* Internal graphics memory clock */ +#define MDC_CLK 13 /* MDDI client clock */ +#define MDP_CLK 14 /* Mobile display processor clock */ +#define PBUS_CLK 15 /* Peripheral bus clock */ +#define PCM_CLK 16 /* PCM clock */ +#define PMDH_CLK 17 /* Primary MDDI host clock */ +#define SDAC_CLK 18 /* Stereo DAC clock */ +#define SDC1_CLK 19 /* Secure Digital Card clocks */ +#define SDC1_PCLK 20 +#define SDC2_CLK 21 +#define SDC2_PCLK 22 +#define SDC3_CLK 23 +#define SDC3_PCLK 24 +#define SDC4_CLK 25 +#define SDC4_PCLK 26 +#define TSIF_CLK 27 /* Transport Stream Interface clocks */ +#define TSIF_REF_CLK 28 +#define TV_DAC_CLK 29 /* TV clocks */ +#define TV_ENC_CLK 30 +#define UART1_CLK 31 /* UART clocks */ +#define UART2_CLK 32 +#define UART3_CLK 33 +#define UART1DM_CLK 34 +#define UART2DM_CLK 35 +#define USB_HS_CLK 36 /* High speed USB core clock */ +#define USB_HS_PCLK 37 /* High speed USB pbus clock */ +#define USB_OTG_CLK 38 /* Full speed USB clock */ +#define VDC_CLK 39 /* Video controller clock */ +#define VFE_CLK 40 /* Camera / Video Front End clock */ +#define VFE_MDC_CLK 41 /* VFE MDDI client clock */ + +/* qsd8k adds... */ +#define MDP_LCDC_PCLK_CLK 42 +#define MDP_LCDC_PAD_PCLK_CLK 43 +#define MDP_VSYNC_CLK 44 + +#define P_USB_HS_CORE_CLK 53 /* High speed USB 1 core clock */ +/* msm7x30 adds... */ +#define PMDH_P_CLK 82 +#define MDP_P_CLK 86 + +enum { + PCOM_CMD_IDLE = 0x0, + PCOM_CMD_DONE, + PCOM_RESET_APPS, + PCOM_RESET_CHIP, + PCOM_CONFIG_NAND_MPU, + PCOM_CONFIG_USB_CLKS, + PCOM_GET_POWER_ON_STATUS, + PCOM_GET_WAKE_UP_STATUS, + PCOM_GET_BATT_LEVEL, + PCOM_CHG_IS_CHARGING, + PCOM_POWER_DOWN, + PCOM_USB_PIN_CONFIG, + PCOM_USB_PIN_SEL, + PCOM_SET_RTC_ALARM, + PCOM_NV_READ, + PCOM_NV_WRITE, + PCOM_GET_UUID_HIGH, + PCOM_GET_UUID_LOW, + PCOM_GET_HW_ENTROPY, + PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, + PCOM_CLKCTL_RPC_ENABLE, + PCOM_CLKCTL_RPC_DISABLE, + PCOM_CLKCTL_RPC_RESET, + PCOM_CLKCTL_RPC_SET_FLAGS, + PCOM_CLKCTL_RPC_SET_RATE, + PCOM_CLKCTL_RPC_MIN_RATE, + PCOM_CLKCTL_RPC_MAX_RATE, + PCOM_CLKCTL_RPC_RATE, + PCOM_CLKCTL_RPC_PLL_REQUEST, + PCOM_CLKCTL_RPC_ENABLED, + PCOM_VREG_SWITCH, + PCOM_VREG_SET_LEVEL, + PCOM_GPIO_TLMM_CONFIG_GROUP, + PCOM_GPIO_TLMM_UNCONFIG_GROUP, + PCOM_NV_READ_HIGH_BITS, + PCOM_NV_WRITE_HIGH_BITS, + PCOM_RPC_GPIO_TLMM_CONFIG_EX = 0x25, + PCOM_NUM_CMDS, +}; + +enum { + PCOM_INVALID_STATUS = 0x0, + PCOM_READY, + PCOM_CMD_RUNNING, + PCOM_CMD_SUCCESS, + PCOM_CMD_FAIL, +}; + +#ifndef PLATFORM_MSM7X30 +#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4) +#endif +static inline void notify_other_proc_comm(void) +{ +#ifndef PLATFORM_MSM7X30 + writel(1, MSM_A2M_INT(6)); +#else + writel(1<<6, (MSM_GCC_BASE + 0x8)); +#endif +} + +#define APP_COMMAND (MSM_SHARED_BASE + 0x00) +#define APP_STATUS (MSM_SHARED_BASE + 0x04) +#define APP_DATA1 (MSM_SHARED_BASE + 0x08) +#define APP_DATA2 (MSM_SHARED_BASE + 0x0C) + +#define MDM_COMMAND (MSM_SHARED_BASE + 0x10) +#define MDM_STATUS (MSM_SHARED_BASE + 0x14) +#define MDM_DATA1 (MSM_SHARED_BASE + 0x18) +#define MDM_DATA2 (MSM_SHARED_BASE + 0x1C) + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) +{ + int ret = -1; + unsigned status; + + while (readl(MDM_STATUS) != PCOM_READY) + /* XXX check for A9 reset */ + ; + writel(cmd, APP_COMMAND); + if (data1) + writel(*data1, APP_DATA1); + if (data2) + writel(*data2, APP_DATA2); + + notify_other_proc_comm(); + while (readl(APP_COMMAND) != PCOM_CMD_DONE) + /* XXX check for A9 reset */ + ; + status = readl(APP_STATUS); + + if (status != PCOM_CMD_FAIL) { + if (data1) + *data1 = readl(APP_DATA1); + if (data2) + *data2 = readl(APP_DATA2); + ret = 0; + } + return ret; +} + +static int clock_enable(unsigned id) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, 0); +} + +static int clock_disable(unsigned id) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, 0); +} + +static int clock_set_rate(unsigned id, unsigned rate) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); +} + +static int clock_get_rate(unsigned id) +{ + if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, 0)) + return -1; + else + return (int) id; + +} + +void usb_clock_init(void) +{ + clock_enable(USB_HS_PCLK); + clock_enable(USB_HS_CLK); + clock_enable(P_USB_HS_CORE_CLK); +} + +void lcdc_clock_init(unsigned rate) +{ + clock_set_rate(MDP_LCDC_PCLK_CLK, rate); + clock_enable(MDP_LCDC_PCLK_CLK); + clock_enable(MDP_LCDC_PAD_PCLK_CLK); +} + +void mdp_clock_init(unsigned rate) +{ + clock_set_rate(MDP_CLK, rate); + clock_enable(MDP_CLK); + clock_enable(MDP_P_CLK); +} + +void uart3_clock_init(void) +{ + clock_enable(UART3_CLK); + clock_set_rate(UART3_CLK, 19200000 / 4); +} + +void uart2_clock_init(void) +{ + clock_enable(UART2_CLK); + clock_set_rate(UART2_CLK, 19200000); +} + +void uart1_clock_init(void) +{ + clock_enable(UART1_CLK); + clock_set_rate(UART1_CLK, 19200000 / 4); +} + +void mddi_clock_init(unsigned num, unsigned rate) +{ + unsigned clock_id; + + if (num == 0) + clock_id = PMDH_CLK; + else + clock_id = EMDH_CLK; + + clock_enable(clock_id); + clock_set_rate(clock_id, rate); +#ifdef PLATFORM_MSM7X30 + clock_enable(PMDH_P_CLK); +#endif +} + +void reboot(unsigned reboot_reason) +{ + msm_proc_comm(PCOM_RESET_CHIP, &reboot_reason, 0); + for (;;) + ; +} + +int mmc_clock_enable_disable(unsigned id, unsigned enable) +{ + if (enable) + return clock_enable(id); /*Enable mmc clock rate*/ + else + return clock_disable(id); /*Disable mmc clock rate*/ +} + +int mmc_clock_set_rate(unsigned id, unsigned rate) +{ + return clock_set_rate(id, rate); /*Set mmc clock rate*/ +} + +int mmc_clock_get_rate(unsigned id) +{ + return clock_get_rate(id); /*Get mmc clock rate*/ +} + +int gpio_tlmm_config(unsigned config, unsigned disable) +{ + return msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, &disable); +} + +int vreg_set_level(unsigned id, unsigned mv) +{ + return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); +} + +int vreg_enable(unsigned id) +{ + unsigned enable = 1; + return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); + +} + +int vreg_disable(unsigned id) +{ + unsigned enable = 0; + return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); +} -- 1.7.1

The contents of this e-mail and any attachment(s) may contain confidential or privileged information for the intended recipient(s). Unintended recipients are prohibited from taking action on the basis of information in this e-mail and using or disseminating the information, and must notify the sender and delete it from their system. L&T Infotech will not accept responsibility or liability for the accuracy or completeness of, or the presence of any virus or disabling code in this e-mail"