[U-Boot] [PATCH 1/3] pwm: sunxi: add support for PWM found on Allwinner A64 and H3
This commit adds basic support for PWM found on Allwinner A64 and H3
Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com --- arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/include/asm/arch-sunxi/pwm.h | 12 +++ arch/arm/mach-sunxi/board.c | 11 +++ drivers/pwm/Kconfig | 7 ++ drivers/pwm/Makefile | 1 + drivers/pwm/sunxi_pwm.c | 174 +++++++++++++++++++++++++++++++++ 6 files changed, 206 insertions(+) create mode 100644 drivers/pwm/sunxi_pwm.c
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 24f85206c8..7265d18099 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -173,6 +173,7 @@ enum sunxi_gpio_number { #define SUN8I_GPD_SDC1 3 #define SUNXI_GPD_LCD0 2 #define SUNXI_GPD_LVDS0 3 +#define SUNXI_GPD_PWM 2
#define SUN5I_GPE_SDC2 3 #define SUN8I_GPE_TWI2 3 diff --git a/arch/arm/include/asm/arch-sunxi/pwm.h b/arch/arm/include/asm/arch-sunxi/pwm.h index 5884b5dbe7..673e0eb7b5 100644 --- a/arch/arm/include/asm/arch-sunxi/pwm.h +++ b/arch/arm/include/asm/arch-sunxi/pwm.h @@ -11,8 +11,15 @@ #define SUNXI_PWM_CH0_PERIOD (SUNXI_PWM_BASE + 4)
#define SUNXI_PWM_CTRL_PRESCALE0(x) ((x) & 0xf) +#define SUNXI_PWM_CTRL_PRESCALE0_MASK (0xf) #define SUNXI_PWM_CTRL_ENABLE0 (0x5 << 4) #define SUNXI_PWM_CTRL_POLARITY0(x) ((x) << 5) +#define SUNXI_PWM_CTRL_POLARITY0_MASK (1 << 5) +#define SUNXI_PWM_CTRL_CLK_GATE (1 << 6) + +#define SUNXI_PWM_CH0_PERIOD_MAX (0xffff) +#define SUNXI_PWM_CH0_PERIOD_PRD(x) ((x & 0xffff) << 16) +#define SUNXI_PWM_CH0_PERIOD_DUTY(x) ((x) & 0xffff)
#define SUNXI_PWM_PERIOD_80PCT 0x04af03c0
@@ -31,4 +38,9 @@ #define SUNXI_PWM_MUX SUN8I_GPH_PWM #endif
+struct sunxi_pwm { + u32 ctrl; + u32 ch0_period; +}; + #endif diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 65b1ebd837..a85f973a46 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -141,6 +141,16 @@ static int gpio_init(void) return 0; }
+static int pwm_init(void) +{ +#ifdef CONFIG_PWM_SUNXI +#ifdef CONFIG_MACH_SUN50I + sunxi_gpio_set_cfgpin(SUNXI_GPD(22), SUNXI_GPD_PWM); +#endif +#endif + return 0; +} + #if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD) static int spl_board_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) @@ -204,6 +214,7 @@ void s_init(void) clock_init(); timer_init(); gpio_init(); + pwm_init(); #ifndef CONFIG_DM_I2C i2c_init_board(); #endif diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index e827558052..67e3f355e7 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -43,3 +43,10 @@ config PWM_TEGRA four channels with a programmable period and duty cycle. Only a 32KHz clock is supported by the driver but the duty cycle is configurable. + +config PWM_SUNXI + bool "Enable support for the Allwinner Sunxi PWM" + depends on DM_PWM + help + This PWM is found on A64 and other Allwinner SoCs. It supports a + programmable period and duty cycle. A 32-bit counter is used. diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 29d59916cb..1a8f8a58bc 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_PWM_IMX) += pwm-imx.o pwm-imx-util.o obj-$(CONFIG_PWM_ROCKCHIP) += rk_pwm.o obj-$(CONFIG_PWM_SANDBOX) += sandbox_pwm.o obj-$(CONFIG_PWM_TEGRA) += tegra_pwm.o +obj-$(CONFIG_PWM_SUNXI) += sunxi_pwm.o diff --git a/drivers/pwm/sunxi_pwm.c b/drivers/pwm/sunxi_pwm.c new file mode 100644 index 0000000000..3e6d69fa1c --- /dev/null +++ b/drivers/pwm/sunxi_pwm.c @@ -0,0 +1,174 @@ +/* + * Copyright (c) 2017 Vasily Khoruzhick anarsoul@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <div64.h> +#include <dm.h> +#include <pwm.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/pwm.h> +#include <power/regulator.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct sunxi_pwm_priv { + struct sunxi_pwm *regs; + ulong freq; + bool invert; + uint32_t prescaler; +}; + +static const uint32_t prescaler_table[] = { + 120, /* 0000 */ + 180, /* 0001 */ + 240, /* 0010 */ + 360, /* 0011 */ + 480, /* 0100 */ + 0, /* 0101 */ + 0, /* 0110 */ + 0, /* 0111 */ + 12000, /* 1000 */ + 24000, /* 1001 */ + 36000, /* 1010 */ + 48000, /* 1011 */ + 72000, /* 1100 */ + 0, /* 1101 */ + 0, /* 1110 */ + 1, /* 1111 */ +}; + +static const uint64_t nsecs_per_sec = 1000000000L; + +static int sunxi_pwm_set_invert(struct udevice *dev, uint channel, bool polarity) +{ + struct sunxi_pwm_priv *priv = dev_get_priv(dev); + + debug("%s: polarity=%u\n", __func__, polarity); + priv->invert = polarity; + + return 0; +} + +static int sunxi_pwm_set_config(struct udevice *dev, uint channel, uint period_ns, + uint duty_ns) +{ + struct sunxi_pwm_priv *priv = dev_get_priv(dev); + struct sunxi_pwm *regs = priv->regs; + int prescaler; + u32 v, period, duty; + uint64_t div = 0, pval = 0, scaled_freq = 0; + + debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns); + + for (prescaler = 0; prescaler < SUNXI_PWM_CTRL_PRESCALE0_MASK; prescaler++) { + if (!prescaler_table[prescaler]) + continue; + div = priv->freq; + pval = prescaler_table[prescaler]; + scaled_freq = lldiv(div, pval); + div = scaled_freq * period_ns; + div = lldiv(div, nsecs_per_sec); + if (div - 1 <= SUNXI_PWM_CH0_PERIOD_MAX) + break; + } + + if (div - 1 > SUNXI_PWM_CH0_PERIOD_MAX) { + debug("%s: failed to find prescaler value\n", __func__); + return -EINVAL; + } + + period = div; + div = scaled_freq * duty_ns; + div = lldiv(div, nsecs_per_sec); + duty = div; + + if (priv->prescaler != prescaler) { + /* Mask clock to update prescaler */ + v = readl(®s->ctrl); + v &= ~SUNXI_PWM_CTRL_CLK_GATE; + writel(v, ®s->ctrl); + v &= ~SUNXI_PWM_CTRL_PRESCALE0_MASK; + v |= (priv->prescaler & SUNXI_PWM_CTRL_PRESCALE0_MASK); + writel(v, ®s->ctrl); + v |= SUNXI_PWM_CTRL_CLK_GATE; + writel(v, ®s->ctrl); + priv->prescaler = prescaler; + } + + writel(SUNXI_PWM_CH0_PERIOD_PRD(period) | + SUNXI_PWM_CH0_PERIOD_DUTY(duty), ®s->ch0_period); + + debug("%s: prescaler: %d, period: %d, duty: %d\n", __func__, priv->prescaler, + period, duty); + + return 0; +} + +static int sunxi_pwm_set_enable(struct udevice *dev, uint channel, bool enable) +{ + struct sunxi_pwm_priv *priv = dev_get_priv(dev); + struct sunxi_pwm *regs = priv->regs; + uint32_t v; + + debug("%s: Enable '%s'\n", __func__, dev->name); + + v = readl(®s->ctrl); + if (!enable) { + v &= ~SUNXI_PWM_CTRL_ENABLE0; + writel(v, ®s->ctrl); + return 0; + } + + v &= ~SUNXI_PWM_CTRL_POLARITY0_MASK; + v |= priv->invert ? SUNXI_PWM_CTRL_POLARITY0(0) : + SUNXI_PWM_CTRL_POLARITY0(1); + v |= SUNXI_PWM_CTRL_ENABLE0; + writel(v, ®s->ctrl); + + return 0; +} + +static int sunxi_pwm_ofdata_to_platdata(struct udevice *dev) +{ + struct sunxi_pwm_priv *priv = dev_get_priv(dev); + + priv->regs = (struct sunxi_pwm *)devfdt_get_addr(dev); + + return 0; +} + +static int sunxi_pwm_probe(struct udevice *dev) +{ + struct sunxi_pwm_priv *priv = dev_get_priv(dev); + + priv->freq = 24000000; + + return 0; +} + +static const struct pwm_ops sunxi_pwm_ops = { + .set_invert = sunxi_pwm_set_invert, + .set_config = sunxi_pwm_set_config, + .set_enable = sunxi_pwm_set_enable, +}; + +static const struct udevice_id sunxi_pwm_ids[] = { + { .compatible = "allwinner,sun8i-h3-pwm" }, + { .compatible = "allwinner,sun50i-a64-pwm" }, + { } +}; + +U_BOOT_DRIVER(sunxi_pwm) = { + .name = "sunxi_pwm", + .id = UCLASS_PWM, + .of_match = sunxi_pwm_ids, + .ops = &sunxi_pwm_ops, + .ofdata_to_platdata = sunxi_pwm_ofdata_to_platdata, + .probe = sunxi_pwm_probe, + .priv_auto_alloc_size = sizeof(struct sunxi_pwm_priv), +};
u-boot doesn't have dummy regulators, so pwm_backlight probe will fail if regulator is missing. Make it optional to get this driver working on platforms where there's no backlight regultor.
Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com --- drivers/video/pwm_backlight.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/video/pwm_backlight.c b/drivers/video/pwm_backlight.c index fbd7bf7838..05e56ffead 100644 --- a/drivers/video/pwm_backlight.c +++ b/drivers/video/pwm_backlight.c @@ -32,16 +32,21 @@ static int pwm_backlight_enable(struct udevice *dev) uint duty_cycle; int ret;
- plat = dev_get_uclass_platdata(priv->reg); - debug("%s: Enable '%s', regulator '%s'/'%s'\n", __func__, dev->name, - priv->reg->name, plat->name); - ret = regulator_set_enable(priv->reg, true); - if (ret) { - debug("%s: Cannot enable regulator for PWM '%s'\n", __func__, - dev->name); - return ret; + if (priv->reg) { + plat = dev_get_uclass_platdata(priv->reg); + debug("%s: Enable '%s', regulator '%s'/'%s'\n", __func__, dev->name, + priv->reg->name, plat->name); + ret = regulator_set_enable(priv->reg, true); + if (ret) { + debug("%s: Cannot enable regulator for PWM '%s'\n", __func__, + dev->name); + return ret; + } + mdelay(120); } - mdelay(120); + + debug("%s: default: %d, min: %d, max: %d\n", __func__, + priv->default_level, priv->min_level, priv->max_level);
duty_cycle = priv->period_ns * (priv->default_level - priv->min_level) / (priv->max_level - priv->min_level + 1); @@ -68,10 +73,9 @@ static int pwm_backlight_ofdata_to_platdata(struct udevice *dev) debug("%s: start\n", __func__); ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, "power-supply", &priv->reg); - if (ret) { + if (ret) debug("%s: Cannot get power supply: ret=%d\n", __func__, ret); - return ret; - } + ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable, GPIOD_IS_OUT); if (ret) {
Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com --- arch/arm/dts/sun50i-a64.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 65a344d9ce..14e94bf00e 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -319,6 +319,14 @@ }; };
+ pwm: pwm@01c21400 { + compatible = "allwinner,sun50i-a64-pwm"; + reg = <0x01c21400 0x8>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>;
Please discard this, I forgot to include maintainers in CC. Will resend.
On Sun, Sep 17, 2017 at 8:28 PM, Vasily Khoruzhick anarsoul@gmail.com wrote:
This commit adds basic support for PWM found on Allwinner A64 and H3
Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com
arch/arm/include/asm/arch-sunxi/gpio.h | 1 + arch/arm/include/asm/arch-sunxi/pwm.h | 12 +++ arch/arm/mach-sunxi/board.c | 11 +++ drivers/pwm/Kconfig | 7 ++ drivers/pwm/Makefile | 1 + drivers/pwm/sunxi_pwm.c | 174 +++++++++++++++++++++++++++++++++ 6 files changed, 206 insertions(+) create mode 100644 drivers/pwm/sunxi_pwm.c
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 24f85206c8..7265d18099 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -173,6 +173,7 @@ enum sunxi_gpio_number { #define SUN8I_GPD_SDC1 3 #define SUNXI_GPD_LCD0 2 #define SUNXI_GPD_LVDS0 3 +#define SUNXI_GPD_PWM 2
#define SUN5I_GPE_SDC2 3 #define SUN8I_GPE_TWI2 3 diff --git a/arch/arm/include/asm/arch-sunxi/pwm.h b/arch/arm/include/asm/arch-sunxi/pwm.h index 5884b5dbe7..673e0eb7b5 100644 --- a/arch/arm/include/asm/arch-sunxi/pwm.h +++ b/arch/arm/include/asm/arch-sunxi/pwm.h @@ -11,8 +11,15 @@ #define SUNXI_PWM_CH0_PERIOD (SUNXI_PWM_BASE + 4)
#define SUNXI_PWM_CTRL_PRESCALE0(x) ((x) & 0xf) +#define SUNXI_PWM_CTRL_PRESCALE0_MASK (0xf) #define SUNXI_PWM_CTRL_ENABLE0 (0x5 << 4) #define SUNXI_PWM_CTRL_POLARITY0(x) ((x) << 5) +#define SUNXI_PWM_CTRL_POLARITY0_MASK (1 << 5) +#define SUNXI_PWM_CTRL_CLK_GATE (1 << 6)
+#define SUNXI_PWM_CH0_PERIOD_MAX (0xffff) +#define SUNXI_PWM_CH0_PERIOD_PRD(x) ((x & 0xffff) << 16) +#define SUNXI_PWM_CH0_PERIOD_DUTY(x) ((x) & 0xffff)
#define SUNXI_PWM_PERIOD_80PCT 0x04af03c0
@@ -31,4 +38,9 @@ #define SUNXI_PWM_MUX SUN8I_GPH_PWM #endif
+struct sunxi_pwm {
u32 ctrl;u32 ch0_period;+};
#endif diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 65b1ebd837..a85f973a46 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -141,6 +141,16 @@ static int gpio_init(void) return 0; }
+static int pwm_init(void) +{ +#ifdef CONFIG_PWM_SUNXI +#ifdef CONFIG_MACH_SUN50I
sunxi_gpio_set_cfgpin(SUNXI_GPD(22), SUNXI_GPD_PWM);+#endif +#endif
return 0;+}
#if defined(CONFIG_SPL_BOARD_LOAD_IMAGE) && defined(CONFIG_SPL_BUILD) static int spl_board_load_image(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) @@ -204,6 +214,7 @@ void s_init(void) clock_init(); timer_init(); gpio_init();
pwm_init();#ifndef CONFIG_DM_I2C i2c_init_board(); #endif diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index e827558052..67e3f355e7 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -43,3 +43,10 @@ config PWM_TEGRA four channels with a programmable period and duty cycle. Only a 32KHz clock is supported by the driver but the duty cycle is configurable.
+config PWM_SUNXI
bool "Enable support for the Allwinner Sunxi PWM"depends on DM_PWMhelpThis PWM is found on A64 and other Allwinner SoCs. It supports aprogrammable period and duty cycle. A 32-bit counter is used.diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 29d59916cb..1a8f8a58bc 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_PWM_IMX) += pwm-imx.o pwm-imx-util.o obj-$(CONFIG_PWM_ROCKCHIP) += rk_pwm.o obj-$(CONFIG_PWM_SANDBOX) += sandbox_pwm.o obj-$(CONFIG_PWM_TEGRA) += tegra_pwm.o +obj-$(CONFIG_PWM_SUNXI) += sunxi_pwm.o diff --git a/drivers/pwm/sunxi_pwm.c b/drivers/pwm/sunxi_pwm.c new file mode 100644 index 0000000000..3e6d69fa1c --- /dev/null +++ b/drivers/pwm/sunxi_pwm.c @@ -0,0 +1,174 @@ +/*
- Copyright (c) 2017 Vasily Khoruzhick anarsoul@gmail.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <div64.h> +#include <dm.h> +#include <pwm.h> +#include <regmap.h> +#include <syscon.h> +#include <asm/io.h> +#include <asm/arch/pwm.h> +#include <power/regulator.h>
+DECLARE_GLOBAL_DATA_PTR;
+struct sunxi_pwm_priv {
struct sunxi_pwm *regs;ulong freq;bool invert;uint32_t prescaler;+};
+static const uint32_t prescaler_table[] = {
120, /* 0000 */180, /* 0001 */240, /* 0010 */360, /* 0011 */480, /* 0100 */0, /* 0101 */0, /* 0110 */0, /* 0111 */12000, /* 1000 */24000, /* 1001 */36000, /* 1010 */48000, /* 1011 */72000, /* 1100 */0, /* 1101 */0, /* 1110 */1, /* 1111 */+};
+static const uint64_t nsecs_per_sec = 1000000000L;
+static int sunxi_pwm_set_invert(struct udevice *dev, uint channel, bool polarity) +{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);debug("%s: polarity=%u\n", __func__, polarity);priv->invert = polarity;return 0;+}
+static int sunxi_pwm_set_config(struct udevice *dev, uint channel, uint period_ns,
uint duty_ns)+{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);struct sunxi_pwm *regs = priv->regs;int prescaler;u32 v, period, duty;uint64_t div = 0, pval = 0, scaled_freq = 0;debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns);for (prescaler = 0; prescaler < SUNXI_PWM_CTRL_PRESCALE0_MASK; prescaler++) {if (!prescaler_table[prescaler])continue;div = priv->freq;pval = prescaler_table[prescaler];scaled_freq = lldiv(div, pval);div = scaled_freq * period_ns;div = lldiv(div, nsecs_per_sec);if (div - 1 <= SUNXI_PWM_CH0_PERIOD_MAX)break;}if (div - 1 > SUNXI_PWM_CH0_PERIOD_MAX) {debug("%s: failed to find prescaler value\n", __func__);return -EINVAL;}period = div;div = scaled_freq * duty_ns;div = lldiv(div, nsecs_per_sec);duty = div;if (priv->prescaler != prescaler) {/* Mask clock to update prescaler */v = readl(®s->ctrl);v &= ~SUNXI_PWM_CTRL_CLK_GATE;writel(v, ®s->ctrl);v &= ~SUNXI_PWM_CTRL_PRESCALE0_MASK;v |= (priv->prescaler & SUNXI_PWM_CTRL_PRESCALE0_MASK);writel(v, ®s->ctrl);v |= SUNXI_PWM_CTRL_CLK_GATE;writel(v, ®s->ctrl);priv->prescaler = prescaler;}writel(SUNXI_PWM_CH0_PERIOD_PRD(period) |SUNXI_PWM_CH0_PERIOD_DUTY(duty), ®s->ch0_period);debug("%s: prescaler: %d, period: %d, duty: %d\n", __func__, priv->prescaler,period, duty);return 0;+}
+static int sunxi_pwm_set_enable(struct udevice *dev, uint channel, bool enable) +{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);struct sunxi_pwm *regs = priv->regs;uint32_t v;debug("%s: Enable '%s'\n", __func__, dev->name);v = readl(®s->ctrl);if (!enable) {v &= ~SUNXI_PWM_CTRL_ENABLE0;writel(v, ®s->ctrl);return 0;}v &= ~SUNXI_PWM_CTRL_POLARITY0_MASK;v |= priv->invert ? SUNXI_PWM_CTRL_POLARITY0(0) :SUNXI_PWM_CTRL_POLARITY0(1);v |= SUNXI_PWM_CTRL_ENABLE0;writel(v, ®s->ctrl);return 0;+}
+static int sunxi_pwm_ofdata_to_platdata(struct udevice *dev) +{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);priv->regs = (struct sunxi_pwm *)devfdt_get_addr(dev);return 0;+}
+static int sunxi_pwm_probe(struct udevice *dev) +{
struct sunxi_pwm_priv *priv = dev_get_priv(dev);priv->freq = 24000000;return 0;+}
+static const struct pwm_ops sunxi_pwm_ops = {
.set_invert = sunxi_pwm_set_invert,.set_config = sunxi_pwm_set_config,.set_enable = sunxi_pwm_set_enable,+};
+static const struct udevice_id sunxi_pwm_ids[] = {
{ .compatible = "allwinner,sun8i-h3-pwm" },{ .compatible = "allwinner,sun50i-a64-pwm" },{ }+};
+U_BOOT_DRIVER(sunxi_pwm) = {
.name = "sunxi_pwm",.id = UCLASS_PWM,.of_match = sunxi_pwm_ids,.ops = &sunxi_pwm_ops,.ofdata_to_platdata = sunxi_pwm_ofdata_to_platdata,.probe = sunxi_pwm_probe,.priv_auto_alloc_size = sizeof(struct sunxi_pwm_priv),+};
2.14.1
participants (1)
-
Vasily Khoruzhick