From: Vinitha Pillai vinitha.pillai@nxp.com

Raw uboot image is used in place of FIT image in secure boot. The maximum allocated size of raw u-boot bin is 1MB in memory map. Hence , CONFIG_SYS_MONITOR_LEN has been modified to 1 MB. The bootscript (BS_ADDR) and its header (BS_HDR_ADDR) offset on MMC have also been modified to accommodate the increase in uboot size.

Signed-off-by: Vinitha Pillai-B57223 vinitha.pillai@nxp.com Reviewed-by: Sumit Garg sumit.garg@nxp.com Reviewed-by: Ruchika Gupta ruchika.gupta@nxp.com Reviewed-by: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com ---

Changes in v2: Changed the commit message and added reviewers

arch/arm/include/asm/fsl_secure_boot.h | 4 ++-- include/configs/ls1021atwr.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index 4525287..0ef7315 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -99,8 +99,8 @@ /* For SD boot address and size are assigned in terms of sector * offset and no. of sectors respectively. */ -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000800 -#define CONFIG_BS_ADDR_DEVICE 0x00000840 +#define CONFIG_BS_HDR_ADDR_DEVICE 0x00000900 +#define CONFIG_BS_ADDR_DEVICE 0x00000940 #define CONFIG_BS_HDR_SIZE 0x00000010 #define CONFIG_BS_SIZE 0x00000008 #else diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index b48cd00..178239f 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -134,9 +134,9 @@ * size increases then increase this size in case of secure boot as * it uses raw u-boot image instead of fit image. */ -#define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE) +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) #else -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x100000 #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ #endif