Import the WeTek Core2 and supporting meson-gx-p23x-q20x.dtsi files from Linux 5.10.

Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- arch/arm/dts/Makefile | 1 + arch/arm/dts/meson-gx-p23x-q20x.dtsi | 324 ++++++++++++++++++ .../arm/dts/meson-gxm-wetek-core2-u-boot.dtsi | 7 + arch/arm/dts/meson-gxm-wetek-core2.dts | 87 +++++ 4 files changed, 419 insertions(+) create mode 100644 arch/arm/dts/meson-gx-p23x-q20x.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi create mode 100644 arch/arm/dts/meson-gxm-wetek-core2.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 4cbf3746f3..99f89227cb 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -166,6 +166,7 @@ dtb-$(CONFIG_ARCH_MESON) += \ meson-gxl-s905d-libretech-pc.dtb \ meson-gxm-khadas-vim2.dtb \ meson-gxm-s912-libretech-pc.dtb \ + meson-gxm-wetek-core2.dtb \ meson-axg-s400.dtb \ meson-g12a-u200.dtb \ meson-g12a-sei510.dtb \ diff --git a/arch/arm/dts/meson-gx-p23x-q20x.dtsi b/arch/arm/dts/meson-gx-p23x-q20x.dtsi new file mode 100644 index 0000000000..6b57e15aad --- /dev/null +++ b/arch/arm/dts/meson-gx-p23x-q20x.dtsi @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione carlo@endlessm.com + */ + +/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either + * the pin-compatible S912 (GXM) or S905D (GXL) SoCs. + */ + +#include <dt-bindings/sound/meson-aiu.h> + +/ { + aliases { + serial0 = &uart_AO; + ethernet0 = &ethmac; + }; + + dio2133: analog-amplifier { + compatible = "simple-audio-amplifier"; + sound-name-prefix = "AU2"; + VCC-supply = <&hdmi_5v>; + enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + }; + + spdif_dit: audio-codec-0 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,gx-sound-card"; + model = "GX-P230-Q200"; + audio-aux-devs = <&dio2133>; + audio-widgets = "Line", "Lineout"; + audio-routing = "AU2 INL", "ACODEC LOLP", + "AU2 INR", "ACODEC LORP", + "AU2 INL", "ACODEC LOLN", + "AU2 INR", "ACODEC LORN", + "Lineout", "AU2 OUTL", + "Lineout", "AU2 OUTR"; + assigned-clocks = <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; + }; + + dai-link-1 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; + }; + + dai-link-2 { + sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; + dai-format = "i2s"; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&aiu AIU_HDMI CTRL_I2S>; + }; + + codec-1 { + sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; + }; + }; + + dai-link-3 { + sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + }; + + dai-link-4 { + sound-dai = <&aiu AIU_HDMI CTRL_OUT>; + + codec-0 { + sound-dai = <&hdmi_tx>; + }; + }; + + dai-link-5 { + sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; + + codec-0 { + sound-dai = <&acodec>; + }; + }; + }; +}; + +&acodec { + AVDD-supply = <&vddio_ao18>; + status = "okay"; +}; + +&aiu { + status = "okay"; + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&ethmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; + hdmi-supply = <&hdmi_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + dr_mode = "otg"; +}; diff --git a/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi b/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi new file mode 100644 index 0000000000..39270ea71c --- /dev/null +++ b/arch/arm/dts/meson-gxm-wetek-core2-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS. + * Author: Neil Armstrong narmstrong@baylibre.com + */ + +#include "meson-gxl-u-boot.dtsi" diff --git a/arch/arm/dts/meson-gxm-wetek-core2.dts b/arch/arm/dts/meson-gxm-wetek-core2.dts new file mode 100644 index 0000000000..ec794c134c --- /dev/null +++ b/arch/arm/dts/meson-gxm-wetek-core2.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Christian Hewitt christianshewitt@gmail.com + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; + model = "WeTek Core 2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-update { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button-power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Disabled as Realtek RTL8152 USB provides Ethernet */ +&ethmac { + status = "disabled"; +}; + +&internal_phy { + status = "disabled"; +}; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +};

Update the device matrix and add build instructions.

Signed-off-by: Christian Hewitt christianshewitt@gmail.com --- doc/board/amlogic/index.rst | 3 +- doc/board/amlogic/wetek-core2.rst | 90 +++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+), 1 deletion(-) create mode 100644 doc/board/amlogic/wetek-core2.rst

diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index cba1c7b726..a585d857df 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+=================+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC v1 | | | | | Odroid-C4 | +| | P200 | LibreTech-CC v1 | WeTek Core2 | | | | Odroid-C4 | | | P201 | LibreTech-AC v2 | | | | | | +-------------------------------+-----------+-----------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | @@ -95,4 +95,5 @@ Board Documentation sei510 sei610 u200 + wetek-core2 w400 diff --git a/doc/board/amlogic/wetek-core2.rst b/doc/board/amlogic/wetek-core2.rst new file mode 100644 index 0000000000..d2aeb90c3d --- /dev/null +++ b/doc/board/amlogic/wetek-core2.rst @@ -0,0 +1,90 @@ +.. SPDX-License-Identifier: GPL-2.0+ +U-Boot for WeTek Core2 +====================== + +WeTek Core2 is an Android STB based on the Q200 reference design with +the following specifications: + + - Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz + - ARM Mali T820 GPU + - 3GB DDR4 SDRAM + - 10/100 Realtek RTL8152 Ethernet (internal USB) + - HDMI 2.0 4K/60Hz display + - 2x USB 2.0 Host, 1x USB 2.0 OTG (internal) + - 32GB eMMC + - microSD + - SDIO Wifi Module, Bluetooth + - Two channel IR receiver + +U-Boot compilation +------------------ + +.. code-block:: bash + $ export CROSS_COMPILE=aarch64-none-elf- + $ make wetek-core2_defconfig + $ make +Image creation +-------------- + +Amlogic does not provide sources for the firmware or the tools needed +to create the bootloader image, and WeTek has not publicly shared the +precompiled FIP binaries. However the public Khadas VIM2 sources also +work with the Core2 box so we can use the Khadas git tree: + +.. code-block:: bash + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-... + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + $ git clone https://github.com/khadas/u-boot -b khadas-vim-v2015.01 vim-u-boot + $ cd vim-u-boot + $ make kvim2_defconfig + $ make + $ export FIPDIR=$PWD/fip + +Go back to mainline U-Boot source tree then: + +.. code-block:: bash + $ mkdir fip + $ cp $FIPDIR/gxl/bl2.bin fip/ + $ cp $FIPDIR/gxl/acs.bin fip/ + $ cp $FIPDIR/gxl/bl21.bin fip/ + $ cp $FIPDIR/gxl/bl30.bin fip/ + $ cp $FIPDIR/gxl/bl301.bin fip/ + $ cp $FIPDIR/gxl/bl31.img fip/ + $ cp u-boot.bin fip/bl33.bin + $ $FIPDIR/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 + $ $FIPDIR/blx_fix.sh \ + fip/bl2_acs.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/bl21.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img + $ $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin + $ $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig + $ $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc + +then write the image to SD with: + +.. code-block:: bash + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444