[U-Boot] [PATCH] boards: amlogic-g200: remove phy reset
The PHY reset is now handled by the MAC driver, remove this leftover.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com --- board/amlogic/q200/q200.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index 1932c14aa2..2ea97c362e 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -26,12 +26,6 @@ int misc_init_r(void)
meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- /* Reset PHY on GPIOZ_14 */ - clrbits_le32(GX_GPIO_EN(3), BIT(14)); - clrbits_le32(GX_GPIO_OUT(3), BIT(14)); - mdelay(10); - setbits_le32(GX_GPIO_OUT(3), BIT(14)); - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);
On 28/05/2019 13:15, Neil Armstrong wrote:
The PHY reset is now handled by the MAC driver, remove this leftover.
Signed-off-by: Neil Armstrong narmstrong@baylibre.com
board/amlogic/q200/q200.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c index 1932c14aa2..2ea97c362e 100644 --- a/board/amlogic/q200/q200.c +++ b/board/amlogic/q200/q200.c @@ -26,12 +26,6 @@ int misc_init_r(void)
meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
- /* Reset PHY on GPIOZ_14 */
- clrbits_le32(GX_GPIO_EN(3), BIT(14));
- clrbits_le32(GX_GPIO_OUT(3), BIT(14));
- mdelay(10);
- setbits_le32(GX_GPIO_OUT(3), BIT(14));
- if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, mac_addr, EFUSE_MAC_SIZE);
Applied to u-boot-amlogic
participants (1)
-
Neil Armstrong