Hi,

+ Tom

On 28/02/24 14:28, Wadim Egorov wrote:

Use proper binary artifact names for HSFS devices. Do not use the *_unsigned binaries.

Signed-off-by: Wadim Egorov w.egorov@phytec.de

Reviewed-by: Dhruva Gole d-gole@ti.com

doc/board/phytec/phycore-am62x.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/board/phytec/phycore-am62x.rst b/doc/board/phytec/phycore-am62x.rst index 1d641a78cf..bc6d524669 100644 --- a/doc/board/phytec/phycore-am62x.rst +++ b/doc/board/phytec/phycore-am62x.rst @@ -92,9 +92,9 @@ Assuming the uSD card is `/dev/mmcblk0`: To boot from a micro SD card on a HSFS device simply copy the following artifacts to the FAT partition:

-* tiboot3.bin from R5 build as tiboot3.bin -* tispl.bin_unsigned from Cortex-A build as tispl.bin -* u-boot.img_unsigned from Cortex-A build as u-boot.img +* tiboot3.bin from R5 build +* tispl.bin from Cortex-A build +* u-boot.img from Cortex-A build

LGTM.