[PATCH] usb: gadget: Compile USB ethernet gadget only if NET is enabled
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de --- Cc: Lukasz Majewski lukma@denx.de --- drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif obj-$(CONFIG_CI_UDC) += ci_udc.o +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today, and could just add SPL_USB_ETH_RNDIS. Are there TPL users today for this? There's no TPL_USB at all.
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif obj-$(CONFIG_CI_UDC) += ci_udc.o +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
, and could just add
SPL_USB_ETH_RNDIS. Are there TPL users today for this? There's no TPL_USB at all.
[...]
On Mon, May 01, 2023 at 07:40:57PM +0200, Marek Vasut wrote:
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif obj-$(CONFIG_CI_UDC) += ci_udc.o +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
Yes, it resides in common/spl/Kconfig
On 5/1/23 20:53, Tom Rini wrote:
On Mon, May 01, 2023 at 07:40:57PM +0200, Marek Vasut wrote:
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif obj-$(CONFIG_CI_UDC) += ci_udc.o +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
Yes, it resides in common/spl/Kconfig
Uhhhhh, such USB symbol is not supposed to be there in the first place.
However, looking at the meaning of that symbol, it seems it governs something else -- USB ethernet device(s) (like the USB-ethernet adapter which you plug into USB host port). So, the SPL_USB_ETHER symbol name is incorrectly named too and should be renamed to something else first I think ?
Do I read it right ?
And if so, then, back to my original reply -- there is no SPL_USB_ETHER symbol. Does it make more sense to really add one (not misnamed one) or not ?
On Mon, May 01, 2023 at 10:49:37PM +0200, Marek Vasut wrote:
On 5/1/23 20:53, Tom Rini wrote:
On Mon, May 01, 2023 at 07:40:57PM +0200, Marek Vasut wrote:
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote:
On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote:
> In case NET networking is not enabled, it is not possible to compile > the USB ethernet gadget. Protect the symbols in Makefile to avoid build > failure. Such build failure may occur e.g. in case NET and USB ethernet > gadget is enabled in U-Boot proper, but not in SPL. > > Signed-off-by: Marek Vasut marex@denx.de > --- > Cc: Lukasz Majewski lukma@denx.de > --- > drivers/usb/gadget/Makefile | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile > index 6cfe0f3a041..36f65e7eb95 100644 > --- a/drivers/usb/gadget/Makefile > +++ b/drivers/usb/gadget/Makefile > @@ -34,8 +34,10 @@ endif > obj-$(CONFIG_CI_UDC) += ci_udc.o > +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) > obj-$(CONFIG_USB_ETHER) += ether.o > obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o > +endif > # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE > # This is really only N900 and USBTTY now.
Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
Yes, it resides in common/spl/Kconfig
Uhhhhh, such USB symbol is not supposed to be there in the first place.
There's long running debate on where some symbols should be for a better overall experience of enabling features.
However, looking at the meaning of that symbol, it seems it governs something else -- USB ethernet device(s) (like the USB-ethernet adapter which you plug into USB host port). So, the SPL_USB_ETHER symbol name is incorrectly named too and should be renamed to something else first I think ?
Do I read it right ?
And if so, then, back to my original reply -- there is no SPL_USB_ETHER symbol. Does it make more sense to really add one (not misnamed one) or not ?
We should re-work things as needed so that we have more Kconfig symbols, as needed. There's some overlap / overloading of things today as platforms have been able to (and I think am335x_evm is still one that builds for) supporting making a USB RNDIS gadget device happen in SPL, so that we can then be fed the next stage of U-Boot.
On 5/1/23 23:18, Tom Rini wrote:
On Mon, May 01, 2023 at 10:49:37PM +0200, Marek Vasut wrote:
On 5/1/23 20:53, Tom Rini wrote:
On Mon, May 01, 2023 at 07:40:57PM +0200, Marek Vasut wrote:
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote:
On 5/1/23 15:47, Tom Rini wrote: > On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote: > >> In case NET networking is not enabled, it is not possible to compile >> the USB ethernet gadget. Protect the symbols in Makefile to avoid build >> failure. Such build failure may occur e.g. in case NET and USB ethernet >> gadget is enabled in U-Boot proper, but not in SPL. >> >> Signed-off-by: Marek Vasut marex@denx.de >> --- >> Cc: Lukasz Majewski lukma@denx.de >> --- >> drivers/usb/gadget/Makefile | 2 ++ >> 1 file changed, 2 insertions(+) >> >> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile >> index 6cfe0f3a041..36f65e7eb95 100644 >> --- a/drivers/usb/gadget/Makefile >> +++ b/drivers/usb/gadget/Makefile >> @@ -34,8 +34,10 @@ endif >> obj-$(CONFIG_CI_UDC) += ci_udc.o >> +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) >> obj-$(CONFIG_USB_ETHER) += ether.o >> obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o >> +endif >> # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE >> # This is really only N900 and USBTTY now. > > Why can't we just enforce this via Kconfig?
Because there is no SPL/TPL USB_ETHER Kconfig . Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
Yes, it resides in common/spl/Kconfig
Uhhhhh, such USB symbol is not supposed to be there in the first place.
There's long running debate on where some symbols should be for a better overall experience of enabling features.
Putting my USB maintainer hat on, USB drivers related symbols should be in drivers/usb/ .
However, looking at the meaning of that symbol, it seems it governs something else -- USB ethernet device(s) (like the USB-ethernet adapter which you plug into USB host port). So, the SPL_USB_ETHER symbol name is incorrectly named too and should be renamed to something else first I think ?
Do I read it right ?
And if so, then, back to my original reply -- there is no SPL_USB_ETHER symbol. Does it make more sense to really add one (not misnamed one) or not ?
We should re-work things as needed so that we have more Kconfig symbols, as needed. There's some overlap / overloading of things today as platforms have been able to (and I think am335x_evm is still one that builds for) supporting making a USB RNDIS gadget device happen in SPL, so that we can then be fed the next stage of U-Boot.
I have a hardware where I only want USB ethernet support in U-Boot, not in SPL, hence this patch.
But the symbol which is currently named SPL_USB_ETHER as defined in common/ does NOT ungate SPL CDC ethernet support, it ungates SPL USB host ethernet (like those ASIX USB-ethernet adapters), do you agree ?
If yes, then the symbol itself should be renamed .
On Wed, May 03, 2023 at 11:43:57PM +0200, Marek Vasut wrote:
On 5/1/23 23:18, Tom Rini wrote:
On Mon, May 01, 2023 at 10:49:37PM +0200, Marek Vasut wrote:
On 5/1/23 20:53, Tom Rini wrote:
On Mon, May 01, 2023 at 07:40:57PM +0200, Marek Vasut wrote:
On 5/1/23 19:23, Tom Rini wrote:
On Mon, May 01, 2023 at 06:53:52PM +0200, Marek Vasut wrote: > On 5/1/23 15:47, Tom Rini wrote: > > On Sun, Apr 30, 2023 at 11:20:35PM +0200, Marek Vasut wrote: > > > > > In case NET networking is not enabled, it is not possible to compile > > > the USB ethernet gadget. Protect the symbols in Makefile to avoid build > > > failure. Such build failure may occur e.g. in case NET and USB ethernet > > > gadget is enabled in U-Boot proper, but not in SPL. > > > > > > Signed-off-by: Marek Vasut marex@denx.de > > > --- > > > Cc: Lukasz Majewski lukma@denx.de > > > --- > > > drivers/usb/gadget/Makefile | 2 ++ > > > 1 file changed, 2 insertions(+) > > > > > > diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile > > > index 6cfe0f3a041..36f65e7eb95 100644 > > > --- a/drivers/usb/gadget/Makefile > > > +++ b/drivers/usb/gadget/Makefile > > > @@ -34,8 +34,10 @@ endif > > > obj-$(CONFIG_CI_UDC) += ci_udc.o > > > +ifeq ($(CONFIG_$(SPL_TPL_)NET),y) > > > obj-$(CONFIG_USB_ETHER) += ether.o > > > obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o > > > +endif > > > # Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE > > > # This is really only N900 and USBTTY now. > > > > Why can't we just enforce this via Kconfig? > > Because there is no SPL/TPL USB_ETHER Kconfig . > Do we want to grow the Kconfig file with those instead ?
Ah right. Yes, we have SPL_USB_ETHER today
This is exactly the opposite of what I wrote.
And no, we do NOT have this symbol, see:
$ git grep SPL_USB_ETHER drivers/usb | wc -l 0
Yes, it resides in common/spl/Kconfig
Uhhhhh, such USB symbol is not supposed to be there in the first place.
There's long running debate on where some symbols should be for a better overall experience of enabling features.
Putting my USB maintainer hat on, USB drivers related symbols should be in drivers/usb/ .
With everything in Kconfig finally, I have no objection to someone making patches to clean up and make the menus more consistent. However you'd like to move all of SPL*USB* out of common/spl/Kconfig and under drivers/usb/ is OK with me.
However, looking at the meaning of that symbol, it seems it governs something else -- USB ethernet device(s) (like the USB-ethernet adapter which you plug into USB host port). So, the SPL_USB_ETHER symbol name is incorrectly named too and should be renamed to something else first I think ?
Do I read it right ?
And if so, then, back to my original reply -- there is no SPL_USB_ETHER symbol. Does it make more sense to really add one (not misnamed one) or not ?
We should re-work things as needed so that we have more Kconfig symbols, as needed. There's some overlap / overloading of things today as platforms have been able to (and I think am335x_evm is still one that builds for) supporting making a USB RNDIS gadget device happen in SPL, so that we can then be fed the next stage of U-Boot.
I have a hardware where I only want USB ethernet support in U-Boot, not in SPL, hence this patch.
But the symbol which is currently named SPL_USB_ETHER as defined in common/ does NOT ungate SPL CDC ethernet support, it ungates SPL USB host ethernet (like those ASIX USB-ethernet adapters), do you agree ?
If yes, then the symbol itself should be renamed .
What I see in terms of wording in common/spl/Kconfig doesn't match what it builds, which is what it's intended to build. Fire up a build of am335x_evm_defconfig and look at what's under drivers/usb/ which is what the platform wants. Gadget ethernet via RNDIS. So the help is wrong on SPL_USB_ETHER.
On Sun, 30 Apr 2023 23:20:35 +0200 Marek Vasut marex@denx.de wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Reviewed-by: Lukasz Majewski lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
On 5/4/23 11:04, Lukasz Majewski wrote:
On Sun, 30 Apr 2023 23:20:35 +0200 Marek Vasut marex@denx.de wrote:
In case NET networking is not enabled, it is not possible to compile the USB ethernet gadget. Protect the symbols in Makefile to avoid build failure. Such build failure may occur e.g. in case NET and USB ethernet gadget is enabled in U-Boot proper, but not in SPL.
Signed-off-by: Marek Vasut marex@denx.de
Cc: Lukasz Majewski lukma@denx.de
drivers/usb/gadget/Makefile | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 6cfe0f3a041..36f65e7eb95 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -34,8 +34,10 @@ endif
obj-$(CONFIG_CI_UDC) += ci_udc.o
+ifeq ($(CONFIG_$(SPL_TPL_)NET),y) obj-$(CONFIG_USB_ETHER) += ether.o obj-$(CONFIG_USB_ETH_RNDIS) += rndis.o +endif
# Devices not related to the new gadget layer depend on CONFIG_USB_DEVICE # This is really only N900 and USBTTY now.
Reviewed-by: Lukasz Majewski lukma@denx.de
NAK
(so this does not get applied by accident, because ongoing discussion about Kconfig symbols)
participants (3)
-
Lukasz Majewski -
Marek Vasut -
Tom Rini