In the TI am65 device tree files there is no reset defined. Also the Linux kernel driver uses devm_reset_control_get_optional_exclusive(..) to get the reset.

Lets do the same as the kernel does and make thr reset optinal.

Signed-off-by: Christian Gmeiner christian.gmeiner@gmail.com --- drivers/spi/cadence_qspi.c | 14 ++++++++------ drivers/spi/cadence_qspi.h | 2 +- 2 files changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c index d1b3808c4d..db680618ee 100644 --- a/drivers/spi/cadence_qspi.c +++ b/drivers/spi/cadence_qspi.c @@ -201,11 +201,9 @@ static int cadence_spi_probe(struct udevice *bus) } }

- ret = reset_get_bulk(bus, &priv->resets); - if (ret) - dev_warn(bus, "Can't get reset: %d\n", ret); - else - reset_deassert_bulk(&priv->resets); + priv->resets = devm_reset_bulk_get_optional(bus); + if (priv->resets) + reset_deassert_bulk(priv->resets);

if (!priv->qspi_is_init) { cadence_qspi_apb_controller_init(plat); @@ -220,8 +218,12 @@ static int cadence_spi_probe(struct udevice *bus) static int cadence_spi_remove(struct udevice *dev) { struct cadence_spi_priv *priv = dev_get_priv(dev); + int ret = 0; + + if (priv->resets) + ret = reset_release_bulk(priv->resets);

- return reset_release_bulk(&priv->resets); + return ret; }

static int cadence_spi_set_mode(struct udevice *bus, uint mode) diff --git a/drivers/spi/cadence_qspi.h b/drivers/spi/cadence_qspi.h index 49b401168f..19345cac5a 100644 --- a/drivers/spi/cadence_qspi.h +++ b/drivers/spi/cadence_qspi.h @@ -56,7 +56,7 @@ struct cadence_spi_priv { unsigned int qspi_calibrated_cs; unsigned int previous_hz;

- struct reset_ctl_bulk resets; + struct reset_ctl_bulk *resets; };

/* Functions call declaration */