[PATCH] ARM: imx: imx8mn-ddr4-evk: Add ethernet support
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de --- arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; fsl,magic-packet; status = "okay";
diff --git a/board/freescale/imx8mn_evk/imx8mn_evk.c b/board/freescale/imx8mn_evk/imx8mn_evk.c index 9a0a0488bf4..8c4bb6c5b8e 100644 --- a/board/freescale/imx8mn_evk/imx8mn_evk.c +++ b/board/freescale/imx8mn_evk/imx8mn_evk.c @@ -6,18 +6,53 @@ #include <common.h> #include <env.h> #include <init.h> +#include <miiphy.h> +#include <netdev.h> #include <asm/global_data.h> +#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-int board_init(void) +int board_mmc_get_env_dev(int devno) +{ + return devno; +} + +#if IS_ENABLED(CONFIG_FEC_MXC) +static int setup_fec(void) { + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + /* Use 125M anatop REF_CLK1 for ENET1, not from external */ + clrsetbits_le32(&gpr->gpr[1], 0x2000, 0); + return 0; }
-int board_mmc_get_env_dev(int devno) +int board_phy_config(struct phy_device *phydev) { - return devno; + /* enable rgmii rxc skew and phy mode select to RGMII copper */ + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8); + + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x00); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x82ee); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05); + phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100); + + if (phydev->drv->config) + phydev->drv->config(phydev); + return 0; +} +#endif + +int board_init(void) +{ + if (IS_ENABLED(CONFIG_FEC_MXC)) + setup_fec(); + + return 0; }
int board_late_init(void) diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index f7ea65886d5..c9a00bf2c2f 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -43,6 +43,9 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT2=y @@ -71,7 +74,12 @@ CONFIG_MMC_HS400_ES_SUPPORT=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC_IMX=y CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y CONFIG_DM_ETH=y +CONFIG_DM_ETH_PHY=y +CONFIG_PHY_GIGE=y +CONFIG_FEC_MXC=y +CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Jagan.
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
Jagan.
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt. - phy-reset-gpios : Should specify the gpio for phy reset - phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
Michael
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
arch/arm/dts/imx8mn-evk.dtsi | 1 + board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- configs/imx8mn_ddr4_evk_defconfig | 8 +++++ 3 files changed, 47 insertions(+), 3 deletions(-)diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi index 76d042a4cf0..416fadb22b1 100644 --- a/arch/arm/dts/imx8mn-evk.dtsi +++ b/arch/arm/dts/imx8mn-evk.dtsi @@ -53,6 +53,7 @@ pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>;
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote:
Hi Marek,
On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote: > > Add support for ethernet on the imx8mn-ddr4-evk. > > Signed-off-by: Marek Vasut marex@denx.de > Cc: Fabio Estevam festevam@gmail.com > Cc: Peng Fan peng.fan@nxp.com > Cc: Stefano Babic sbabic@denx.de > --- > arch/arm/dts/imx8mn-evk.dtsi | 1 + > board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- > configs/imx8mn_ddr4_evk_defconfig | 8 +++++ > 3 files changed, 47 insertions(+), 3 deletions(-) > > diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi > index 76d042a4cf0..416fadb22b1 100644 > --- a/arch/arm/dts/imx8mn-evk.dtsi > +++ b/arch/arm/dts/imx8mn-evk.dtsi > @@ -53,6 +53,7 @@ > pinctrl-0 = <&pinctrl_fec1>; > phy-mode = "rgmii-id"; > phy-handle = <ðphy0>; > + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
I believe this is phy reset-gpio to be part of mdio child node. any idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
Michael
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote:
On 2/27/21 8:54 AM, Jagan Teki wrote: > Hi Marek, > > On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote: >> >> Add support for ethernet on the imx8mn-ddr4-evk. >> >> Signed-off-by: Marek Vasut marex@denx.de >> Cc: Fabio Estevam festevam@gmail.com >> Cc: Peng Fan peng.fan@nxp.com >> Cc: Stefano Babic sbabic@denx.de >> --- >> arch/arm/dts/imx8mn-evk.dtsi | 1 + >> board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- >> configs/imx8mn_ddr4_evk_defconfig | 8 +++++ >> 3 files changed, 47 insertions(+), 3 deletions(-) >> >> diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi >> index 76d042a4cf0..416fadb22b1 100644 >> --- a/arch/arm/dts/imx8mn-evk.dtsi >> +++ b/arch/arm/dts/imx8mn-evk.dtsi >> @@ -53,6 +53,7 @@ >> pinctrl-0 = <&pinctrl_fec1>; >> phy-mode = "rgmii-id"; >> phy-handle = <ðphy0>; >> + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; > > I believe this is phy reset-gpio to be part of mdio child node. any > idea why it added in fec1 node?
Try $ git grep phy-reset drivers/net/ , that should clarify it all. In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
On Tue, Mar 02, 2021 at 03:52:39PM +0100, Marek Vasut wrote:
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote:
On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote: > > On 2/27/21 8:54 AM, Jagan Teki wrote: > > Hi Marek, > > > > On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote: > > > > > > Add support for ethernet on the imx8mn-ddr4-evk. > > > > > > Signed-off-by: Marek Vasut marex@denx.de > > > Cc: Fabio Estevam festevam@gmail.com > > > Cc: Peng Fan peng.fan@nxp.com > > > Cc: Stefano Babic sbabic@denx.de > > > --- > > > arch/arm/dts/imx8mn-evk.dtsi | 1 + > > > board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- > > > configs/imx8mn_ddr4_evk_defconfig | 8 +++++ > > > 3 files changed, 47 insertions(+), 3 deletions(-) > > > > > > diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi > > > index 76d042a4cf0..416fadb22b1 100644 > > > --- a/arch/arm/dts/imx8mn-evk.dtsi > > > +++ b/arch/arm/dts/imx8mn-evk.dtsi > > > @@ -53,6 +53,7 @@ > > > pinctrl-0 = <&pinctrl_fec1>; > > > phy-mode = "rgmii-id"; > > > phy-handle = <ðphy0>; > > > + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; > > > > I believe this is phy reset-gpio to be part of mdio child node. any > > idea why it added in fec1 node? > > Try $ git grep phy-reset drivers/net/ , that should clarify it all. > In short, FEC in U-Boot still uses legacy bindings.
True. I think it's better to add this property on -u-boot.dtsi which helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
This seems like a case where the "deprecated" property needs to be populated in the upstream dts file, even if the Linux Kernel doesn't need it strictly because we do and we might not need / want to redesign our driver to meet what Linux expects yet again.
On 3/2/21 4:24 PM, Tom Rini wrote:
On Tue, Mar 02, 2021 at 03:52:39PM +0100, Marek Vasut wrote:
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 8:53 AM, Jagan Teki wrote: > On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote: >> >> On 2/27/21 8:54 AM, Jagan Teki wrote: >>> Hi Marek, >>> >>> On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote: >>>> >>>> Add support for ethernet on the imx8mn-ddr4-evk. >>>> >>>> Signed-off-by: Marek Vasut marex@denx.de >>>> Cc: Fabio Estevam festevam@gmail.com >>>> Cc: Peng Fan peng.fan@nxp.com >>>> Cc: Stefano Babic sbabic@denx.de >>>> --- >>>> arch/arm/dts/imx8mn-evk.dtsi | 1 + >>>> board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- >>>> configs/imx8mn_ddr4_evk_defconfig | 8 +++++ >>>> 3 files changed, 47 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi >>>> index 76d042a4cf0..416fadb22b1 100644 >>>> --- a/arch/arm/dts/imx8mn-evk.dtsi >>>> +++ b/arch/arm/dts/imx8mn-evk.dtsi >>>> @@ -53,6 +53,7 @@ >>>> pinctrl-0 = <&pinctrl_fec1>; >>>> phy-mode = "rgmii-id"; >>>> phy-handle = <ðphy0>; >>>> + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; >>> >>> I believe this is phy reset-gpio to be part of mdio child node. any >>> idea why it added in fec1 node? >> >> Try $ git grep phy-reset drivers/net/ , that should clarify it all. >> In short, FEC in U-Boot still uses legacy bindings. > > True. I think it's better to add this property on -u-boot.dtsi which > helps to maintain Linux bindings.
The reset GPIO is not specific to U-Boot in any way, so no. Instead, the Linux DT bindings should be updated too, but that's a separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
This seems like a case where the "deprecated" property needs to be populated in the upstream dts file, even if the Linux Kernel doesn't need it strictly because we do and we might not need / want to redesign our driver to meet what Linux expects yet again.
We really should fix the FEC driver, except that its way out of scope of this patch. And before someone points out that should be simple to do, there is a real unpleasant bonus with FEC and PHY reset bindings, in the ordering in which FEC generates clock for the PHY during reset, for which Linux grew a rather convoluted logic in the FEC driver and the PHY subsystem, see the LAN8710 PHY discussions in Linux which seem to pop up every now and then. So implementing the whole PHY reset handling in FEC driver, to behave just like Linux, isn't as trivial as it seems at first.
On Tue, Mar 02, 2021 at 05:11:48PM +0100, Marek Vasut wrote:
On 3/2/21 4:24 PM, Tom Rini wrote:
On Tue, Mar 02, 2021 at 03:52:39PM +0100, Marek Vasut wrote:
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote: > > On 3/2/21 8:53 AM, Jagan Teki wrote: > > On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote: > > > > > > On 2/27/21 8:54 AM, Jagan Teki wrote: > > > > Hi Marek, > > > > > > > > On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de wrote: > > > > > > > > > > Add support for ethernet on the imx8mn-ddr4-evk. > > > > > > > > > > Signed-off-by: Marek Vasut marex@denx.de > > > > > Cc: Fabio Estevam festevam@gmail.com > > > > > Cc: Peng Fan peng.fan@nxp.com > > > > > Cc: Stefano Babic sbabic@denx.de > > > > > --- > > > > > arch/arm/dts/imx8mn-evk.dtsi | 1 + > > > > > board/freescale/imx8mn_evk/imx8mn_evk.c | 41 +++++++++++++++++++++++-- > > > > > configs/imx8mn_ddr4_evk_defconfig | 8 +++++ > > > > > 3 files changed, 47 insertions(+), 3 deletions(-) > > > > > > > > > > diff --git a/arch/arm/dts/imx8mn-evk.dtsi b/arch/arm/dts/imx8mn-evk.dtsi > > > > > index 76d042a4cf0..416fadb22b1 100644 > > > > > --- a/arch/arm/dts/imx8mn-evk.dtsi > > > > > +++ b/arch/arm/dts/imx8mn-evk.dtsi > > > > > @@ -53,6 +53,7 @@ > > > > > pinctrl-0 = <&pinctrl_fec1>; > > > > > phy-mode = "rgmii-id"; > > > > > phy-handle = <ðphy0>; > > > > > + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; > > > > > > > > I believe this is phy reset-gpio to be part of mdio child node. any > > > > idea why it added in fec1 node? > > > > > > Try $ git grep phy-reset drivers/net/ , that should clarify it all. > > > In short, FEC in U-Boot still uses legacy bindings. > > > > True. I think it's better to add this property on -u-boot.dtsi which > > helps to maintain Linux bindings. > > The reset GPIO is not specific to U-Boot in any way, so no. > Instead, the Linux DT bindings should be updated too, but that's a > separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
This seems like a case where the "deprecated" property needs to be populated in the upstream dts file, even if the Linux Kernel doesn't need it strictly because we do and we might not need / want to redesign our driver to meet what Linux expects yet again.
We really should fix the FEC driver, except that its way out of scope of this patch. And before someone points out that should be simple to do, there is a real unpleasant bonus with FEC and PHY reset bindings, in the ordering in which FEC generates clock for the PHY during reset, for which Linux grew a rather convoluted logic in the FEC driver and the PHY subsystem, see the LAN8710 PHY discussions in Linux which seem to pop up every now and then. So implementing the whole PHY reset handling in FEC driver, to behave just like Linux, isn't as trivial as it seems at first.
It's out of scope for this patch, yes. And given what you note here I'm not even sure it's really required / a great idea for U-Boot. I added Rob to the list here because this is another case of "Is DT ABI or Linux driver description?".
On 02.03.21 17:11, Marek Vasut wrote:
On 3/2/21 4:24 PM, Tom Rini wrote:
On Tue, Mar 02, 2021 at 03:52:39PM +0100, Marek Vasut wrote:
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote: > > On 3/2/21 8:53 AM, Jagan Teki wrote: >> On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote: >>> >>> On 2/27/21 8:54 AM, Jagan Teki wrote: >>>> Hi Marek, >>>> >>>> On Sat, Feb 27, 2021 at 3:44 AM Marek Vasut marex@denx.de >>>> wrote: >>>>> >>>>> Add support for ethernet on the imx8mn-ddr4-evk. >>>>> >>>>> Signed-off-by: Marek Vasut marex@denx.de >>>>> Cc: Fabio Estevam festevam@gmail.com >>>>> Cc: Peng Fan peng.fan@nxp.com >>>>> Cc: Stefano Babic sbabic@denx.de >>>>> --- >>>>> arch/arm/dts/imx8mn-evk.dtsi | 1 + >>>>> board/freescale/imx8mn_evk/imx8mn_evk.c | 41 >>>>> +++++++++++++++++++++++-- >>>>> configs/imx8mn_ddr4_evk_defconfig | 8 +++++ >>>>> 3 files changed, 47 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git a/arch/arm/dts/imx8mn-evk.dtsi >>>>> b/arch/arm/dts/imx8mn-evk.dtsi >>>>> index 76d042a4cf0..416fadb22b1 100644 >>>>> --- a/arch/arm/dts/imx8mn-evk.dtsi >>>>> +++ b/arch/arm/dts/imx8mn-evk.dtsi >>>>> @@ -53,6 +53,7 @@ >>>>> pinctrl-0 = <&pinctrl_fec1>; >>>>> phy-mode = "rgmii-id"; >>>>> phy-handle = <ðphy0>; >>>>> + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; >>>> >>>> I believe this is phy reset-gpio to be part of mdio child >>>> node. any >>>> idea why it added in fec1 node? >>> >>> Try $ git grep phy-reset drivers/net/ , that should clarify it >>> all. >>> In short, FEC in U-Boot still uses legacy bindings. >> >> True. I think it's better to add this property on -u-boot.dtsi >> which >> helps to maintain Linux bindings. > > The reset GPIO is not specific to U-Boot in any way, so no. > Instead, the Linux DT bindings should be updated too, but that's a > separate topic.
Deprecated optional properties: To avoid these, create a phy node according to phy.txt in the same directory, and point the fec's "phy-handle" property to it. Then use the phy's reset binding, again described by phy.txt.
- phy-reset-gpios : Should specify the gpio for phy reset
- phy-reset-duration : Reset duration in milliseconds. Should
present only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are
Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
This seems like a case where the "deprecated" property needs to be populated in the upstream dts file, even if the Linux Kernel doesn't need it strictly because we do and we might not need / want to redesign our driver to meet what Linux expects yet again.
We really should fix the FEC driver, except that its way out of scope of this patch. And before someone points out that should be simple to do, there is a real unpleasant bonus with FEC and PHY reset bindings, in the ordering in which FEC generates clock for the PHY during reset, for which Linux grew a rather convoluted logic in the FEC driver and the PHY subsystem, see the LAN8710 PHY discussions in Linux which seem to pop up every now and then. So implementing the whole PHY reset handling in FEC driver, to behave just like Linux, isn't as trivial as it seems at first.
The simple rule of thumb here is to fix the driver in u-boot, and then think about if such as big effort makes sense in U-Boot. I vote for applying this.
Regards, Stefano
On Tue, Mar 02, 2021 at 05:48:12PM +0100, Stefano Babic wrote:
On 02.03.21 17:11, Marek Vasut wrote:
On 3/2/21 4:24 PM, Tom Rini wrote:
On Tue, Mar 02, 2021 at 03:52:39PM +0100, Marek Vasut wrote:
On 3/2/21 10:16 AM, Michael Nazzareno Trimarchi wrote:
Hi Marek
On Tue, Mar 2, 2021 at 9:40 AM Marek Vasut marex@denx.de wrote:
On 3/2/21 9:21 AM, Michael Nazzareno Trimarchi wrote: > Hi Marek > > On Tue, Mar 2, 2021 at 9:13 AM Marek Vasut marex@denx.de wrote: > > > > On 3/2/21 8:53 AM, Jagan Teki wrote: > > > On Sat, Feb 27, 2021 at 6:21 PM Marek Vasut marex@denx.de wrote: > > > > > > > > On 2/27/21 8:54 AM, Jagan Teki wrote: > > > > > Hi Marek, > > > > > > > > > > On Sat, Feb 27, 2021 at 3:44 AM > > > > > Marek Vasut marex@denx.de wrote: > > > > > > > > > > > > Add support for ethernet on the imx8mn-ddr4-evk. > > > > > > > > > > > > Signed-off-by: Marek Vasut marex@denx.de > > > > > > Cc: Fabio Estevam festevam@gmail.com > > > > > > Cc: Peng Fan peng.fan@nxp.com > > > > > > Cc: Stefano Babic sbabic@denx.de > > > > > > --- > > > > > > arch/arm/dts/imx8mn-evk.dtsi | 1 + > > > > > > > > > > > > board/freescale/imx8mn_evk/imx8mn_evk.c > > > > > > | 41 +++++++++++++++++++++++-- > > > > > > configs/imx8mn_ddr4_evk_defconfig | 8 +++++ > > > > > > 3 files changed, 47 insertions(+), 3 deletions(-) > > > > > > > > > > > > diff --git > > > > > > a/arch/arm/dts/imx8mn-evk.dtsi > > > > > > b/arch/arm/dts/imx8mn-evk.dtsi > > > > > > index 76d042a4cf0..416fadb22b1 100644 > > > > > > --- a/arch/arm/dts/imx8mn-evk.dtsi > > > > > > +++ b/arch/arm/dts/imx8mn-evk.dtsi > > > > > > @@ -53,6 +53,7 @@ > > > > > > pinctrl-0 = <&pinctrl_fec1>; > > > > > > phy-mode = "rgmii-id"; > > > > > > phy-handle = <ðphy0>; > > > > > > + phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; > > > > > > > > > > I believe this is phy reset-gpio to > > > > > be part of mdio child node. any > > > > > idea why it added in fec1 node? > > > > > > > > Try $ git grep phy-reset drivers/net/ , > > > > that should clarify it all. > > > > In short, FEC in U-Boot still uses legacy bindings. > > > > > > True. I think it's better to add this > > > property on -u-boot.dtsi which > > > helps to maintain Linux bindings. > > > > The reset GPIO is not specific to U-Boot in any way, so no. > > Instead, the Linux DT bindings should be updated too, but that's a > > separate topic. > > Deprecated optional properties: > To avoid these, create a phy node > according to phy.txt in the same > directory, and point the fec's > "phy-handle" property to it. Then use > the phy's reset binding, again described by phy.txt. > - phy-reset-gpios : Should specify the gpio for phy reset > - phy-reset-duration : Reset duration in > milliseconds. Should present > only if property "phy-reset-gpios" is > available. Missing the property > will have the duration be 1 millisecond. > Numbers greater than 1000 are > > Jagan refer maybe that property is deprecated
See above, U-Boot does not support the per-PHY reset bindings with FEC. However, the PHY reset GPIO binding is not U-Boot specific, so it should not be hidden in -u-boot.dtsi .
Yes, I understand. What Jagan is proposing is the following (that you can disagree) it's just move deprecated part in uboot.dtsi so we can keep align dtsi from linux without having this problem.
What should happen is that this same thing should be fixed in Linux, i.e. the missing bindings should be added there, and then once a DT sync happens, whoever does the sync should also then update the FEC driver to handle per-PHY resets. But that is out of scope of this patch.
What is for certain is that if the DT sync removes the reset GPIO from DT, ethernet will no longer work in U-Boot and it will show up during testing. If there is some extra property hidden in -u-boot.dtsi, this problem will not trigger test failure then.
This seems like a case where the "deprecated" property needs to be populated in the upstream dts file, even if the Linux Kernel doesn't need it strictly because we do and we might not need / want to redesign our driver to meet what Linux expects yet again.
We really should fix the FEC driver, except that its way out of scope of this patch. And before someone points out that should be simple to do, there is a real unpleasant bonus with FEC and PHY reset bindings, in the ordering in which FEC generates clock for the PHY during reset, for which Linux grew a rather convoluted logic in the FEC driver and the PHY subsystem, see the LAN8710 PHY discussions in Linux which seem to pop up every now and then. So implementing the whole PHY reset handling in FEC driver, to behave just like Linux, isn't as trivial as it seems at first.
The simple rule of thumb here is to fix the driver in u-boot, and then think about if such as big effort makes sense in U-Boot. I vote for applying this.
To be extra clear, I too believe this patch should come in.
Add support for ethernet on the imx8mn-ddr4-evk. Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
Hi Marek,
sorry, false positive. This patch creates warnings for the imx8mn_evk board:
aarch64: + imx8mn_evk +(imx8mn_evk) board/freescale/imx8mn_evk/imx8mn_evk.c: In function 'board_init': +(imx8mn_evk) board/freescale/imx8mn_evk/imx8mn_evk.c:53:3: error: implicit declaration of function 'setup_fec' [-Werror=implicit-function-declaration] +(imx8mn_evk) 53 | setup_fec(); +(imx8mn_evk) | ^~~~~~~~~ +(imx8mn_evk) cc1: all warnings being treated as errors +(imx8mn_evk) make[2]: *** [scripts/Makefile.build:266: board/freescale/imx8mn_evk/imx8mn_evk.o] Error 1 +(imx8mn_evk) make[1]: *** [Makefile:1746: board/freescale/imx8mn_evk] Error 2 +(imx8mn_evk) make: *** [Makefile:171: sub-make] Error 2
Can you check this ? Thanks !
Best regards, Stefano
On 08.04.21 22:58, sbabic@denx.de wrote:
Add support for ethernet on the imx8mn-ddr4-evk. Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Peng Fan peng.fan@nxp.com Cc: Stefano Babic sbabic@denx.de
Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic
participants (6)
-
Jagan Teki -
Marek Vasut -
Michael Nazzareno Trimarchi -
sbabic＠denx.de -
Stefano Babic
-
Tom Rini