[U-Boot] [PATCH] ARM: tegra: use numeric versioning for p2771-0000

From: Stephen Warren swarren@nvidia.com
The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric versioning scheme, with version numbers such as 000/100/200/300/400/500. Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00. However, that numbering scheme is not easily visible outside of NVIDIA, and so does not make much sense to use. Convert U-Boot to use the readily visible numeric scheme.
Also, it turns out that the current A02 DT actually applies to board versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200 so that all U-Boot builds are named after the first version of the HW they support.
Signed-off-by: Stephen Warren swarren@nvidia.com --- arch/arm/dts/Makefile | 4 ++-- .../dts/{tegra186-p2771-0000-a02.dts => tegra186-p2771-0000-000.dts} | 2 +- .../dts/{tegra186-p2771-0000-b00.dts => tegra186-p2771-0000-500.dts} | 2 +- configs/{p2771-0000-a02_defconfig => p2771-0000-000_defconfig} | 4 ++-- configs/{p2771-0000-b00_defconfig => p2771-0000-500_defconfig} | 4 ++-- 5 files changed, 8 insertions(+), 8 deletions(-) rename arch/arm/dts/{tegra186-p2771-0000-a02.dts => tegra186-p2771-0000-000.dts} (88%) rename arch/arm/dts/{tegra186-p2771-0000-b00.dts => tegra186-p2771-0000-500.dts} (88%) rename configs/{p2771-0000-a02_defconfig => p2771-0000-000_defconfig} (87%) rename configs/{p2771-0000-b00_defconfig => p2771-0000-500_defconfig} (87%)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 223124e791b6..93165877029e 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -58,8 +58,8 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-venice2.dtb \ - tegra186-p2771-0000-a02.dtb \ - tegra186-p2771-0000-b00.dtb \ + tegra186-p2771-0000-000.dtb \ + tegra186-p2771-0000-500.dtb \ tegra210-e2220-1170.dtb \ tegra210-p2371-0000.dtb \ tegra210-p2371-2180.dtb \ diff --git a/arch/arm/dts/tegra186-p2771-0000-a02.dts b/arch/arm/dts/tegra186-p2771-0000-000.dts similarity index 88% rename from arch/arm/dts/tegra186-p2771-0000-a02.dts rename to arch/arm/dts/tegra186-p2771-0000-000.dts index 36a3c21a55de..d2664bd596b6 100644 --- a/arch/arm/dts/tegra186-p2771-0000-a02.dts +++ b/arch/arm/dts/tegra186-p2771-0000-000.dts @@ -4,7 +4,7 @@
/ { model = "NVIDIA P2771-0000 A02"; - compatible = "nvidia,p2771-0000-a02", "nvidia,p2771-0000", "nvidia,tegra186"; + compatible = "nvidia,p2771-0000-000", "nvidia,p2771-0000", "nvidia,tegra186";
sdhci@3400000 { cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>; diff --git a/arch/arm/dts/tegra186-p2771-0000-b00.dts b/arch/arm/dts/tegra186-p2771-0000-500.dts similarity index 88% rename from arch/arm/dts/tegra186-p2771-0000-b00.dts rename to arch/arm/dts/tegra186-p2771-0000-500.dts index 0f1d0e83e80d..10595ea6683f 100644 --- a/arch/arm/dts/tegra186-p2771-0000-b00.dts +++ b/arch/arm/dts/tegra186-p2771-0000-500.dts @@ -4,7 +4,7 @@
/ { model = "NVIDIA P2771-0000 B00"; - compatible = "nvidia,p2771-0000-b00", "nvidia,p2771-0000", "nvidia,tegra186"; + compatible = "nvidia,p2771-0000-500", "nvidia,p2771-0000", "nvidia,tegra186";
sdhci@3400000 { cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; diff --git a/configs/p2771-0000-a02_defconfig b/configs/p2771-0000-000_defconfig similarity index 87% rename from configs/p2771-0000-a02_defconfig rename to configs/p2771-0000-000_defconfig index 5ce369c6d330..25ff8ae7a7f0 100644 --- a/configs/p2771-0000-a02_defconfig +++ b/configs/p2771-0000-000_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_TEGRA186=y CONFIG_TARGET_P2771_0000=y -CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-a02" +CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-000" CONFIG_OF_SYSTEM_SETUP=y CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Tegra186 (P2771-0000 A02) # " +CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-000) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set diff --git a/configs/p2771-0000-b00_defconfig b/configs/p2771-0000-500_defconfig similarity index 87% rename from configs/p2771-0000-b00_defconfig rename to configs/p2771-0000-500_defconfig index 27393f3a5d46..9432a13bcc8e 100644 --- a/configs/p2771-0000-b00_defconfig +++ b/configs/p2771-0000-500_defconfig @@ -2,10 +2,10 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_TEGRA186=y CONFIG_TARGET_P2771_0000=y -CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-b00" +CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500" CONFIG_OF_SYSTEM_SETUP=y CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="Tegra186 (P2771-0000 B00) # " +CONFIG_SYS_PROMPT="Tegra186 (P2771-0000-500) # " # CONFIG_CMD_IMI is not set # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set

On 08/29/2016 02:45 PM, Stephen Warren wrote:
From: Stephen Warren swarren@nvidia.com
The board ID EEPROM and board ID stickers on p2771-0000 will use a numeric versioning scheme, with version numbers such as 000/100/200/300/400/500. Within NVIDIA, these versions are also known as A00/A01/A02/A03/A04/B00. However, that numbering scheme is not easily visible outside of NVIDIA, and so does not make much sense to use. Convert U-Boot to use the readily visible numeric scheme.
Also, it turns out that the current A02 DT actually applies to board versions 000/100/200 (A00..A02). Consequently rename this to 000 not 200 so that all U-Boot builds are named after the first version of the HW they support.
diff --git a/arch/arm/dts/tegra186-p2771-0000-a02.dts b/arch/arm/dts/tegra186-p2771-0000-000.dts similarity index 88% rename from arch/arm/dts/tegra186-p2771-0000-a02.dts rename to arch/arm/dts/tegra186-p2771-0000-000.dts index 36a3c21a55de..d2664bd596b6 100644 --- a/arch/arm/dts/tegra186-p2771-0000-a02.dts +++ b/arch/arm/dts/tegra186-p2771-0000-000.dts @@ -4,7 +4,7 @@
/ { model = "NVIDIA P2771-0000 A02";
I need to post a v2 to update the model property too.
participants (1)
-
Stephen Warren