[U-Boot] [PATCH v5 1/5] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter
The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support for this, using the USB host network framework.
TEST=usb start; bootp; tftp ...
Changes for v2: - Coding style cleanup - Changed some comments as suggested - eth_set_hwaddr -> eth_write_hwaddr - tided up other users of eth_getenv_enetaddr_by_index()
Changes for v3: - Drop tfpserverip patch - Change turbo_mode to #define - Fix tfpserverip patch bleed
Changes for v4: - Dropped Tegra2 specific bit - Added patch in place of tftpserverip patch, to speed up successive network commands on asix - Fixed a few broken bits in SMSC from my testing
Changes for v5: - Code style clean-ups in SMSC - Cleaned up debugging of errors in SMSC driver - Changed NULL to "eth" in eth_getenv_enetaddr_by_index() API
Signed-off-by: Simon Glass sjg@chromium.org --- drivers/usb/eth/Makefile | 1 + drivers/usb/eth/smsc95xx.c | 879 +++++++++++++++++++++++++++++++++++++++++++ drivers/usb/eth/usb_ether.c | 7 + include/usb_ether.h | 13 + 4 files changed, 900 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/eth/smsc95xx.c
diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile index 6a5f25a..e28793d 100644 --- a/drivers/usb/eth/Makefile +++ b/drivers/usb/eth/Makefile @@ -28,6 +28,7 @@ COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o ifdef CONFIG_USB_ETHER_ASIX COBJS-y += asix.o endif +COBJS-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c new file mode 100644 index 0000000..6e35a6d --- /dev/null +++ b/drivers/usb/eth/smsc95xx.c @@ -0,0 +1,879 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * Copyright (C) 2009 NVIDIA, Corporation + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <usb.h> +#include <linux/mii.h> +#include "usb_ether.h" + +/* SMSC LAN95xx based USB 2.0 Ethernet Devices */ + +/* Tx command words */ +#define TX_CMD_A_FIRST_SEG_ 0x00002000 +#define TX_CMD_A_LAST_SEG_ 0x00001000 + +/* Rx status word */ +#define RX_STS_FL_ 0x3FFF0000 /* Frame Length */ +#define RX_STS_ES_ 0x00008000 /* Error Summary */ + +/* SCSRs */ +#define ID_REV 0x00 + +#define INT_STS 0x08 + +#define TX_CFG 0x10 +#define TX_CFG_ON_ 0x00000004 + +#define HW_CFG 0x14 +#define HW_CFG_BIR_ 0x00001000 +#define HW_CFG_RXDOFF_ 0x00000600 +#define HW_CFG_MEF_ 0x00000020 +#define HW_CFG_BCE_ 0x00000002 +#define HW_CFG_LRST_ 0x00000008 + +#define PM_CTRL 0x20 +#define PM_CTL_PHY_RST_ 0x00000010 + +#define AFC_CFG 0x2C + +/* + * Hi watermark = 15.5Kb (~10 mtu pkts) + * low watermark = 3k (~2 mtu pkts) + * backpressure duration = ~ 350us + * Apply FC on any frame. + */ +#define AFC_CFG_DEFAULT 0x00F830A1 + +#define E2P_CMD 0x30 +#define E2P_CMD_BUSY_ 0x80000000 +#define E2P_CMD_READ_ 0x00000000 +#define E2P_CMD_TIMEOUT_ 0x00000400 +#define E2P_CMD_LOADED_ 0x00000200 +#define E2P_CMD_ADDR_ 0x000001FF + +#define E2P_DATA 0x34 + +#define BURST_CAP 0x38 + +#define INT_EP_CTL 0x68 +#define INT_EP_CTL_PHY_INT_ 0x00008000 + +#define BULK_IN_DLY 0x6C + +/* MAC CSRs */ +#define MAC_CR 0x100 +#define MAC_CR_MCPAS_ 0x00080000 +#define MAC_CR_PRMS_ 0x00040000 +#define MAC_CR_HPFILT_ 0x00002000 +#define MAC_CR_TXEN_ 0x00000008 +#define MAC_CR_RXEN_ 0x00000004 + +#define ADDRH 0x104 + +#define ADDRL 0x108 + +#define MII_ADDR 0x114 +#define MII_WRITE_ 0x02 +#define MII_BUSY_ 0x01 +#define MII_READ_ 0x00 /* ~of MII Write bit */ + +#define MII_DATA 0x118 + +#define FLOW 0x11C + +#define VLAN1 0x120 + +#define COE_CR 0x130 +#define Tx_COE_EN_ 0x00010000 +#define Rx_COE_EN_ 0x00000001 + +/* Vendor-specific PHY Definitions */ +#define PHY_INT_SRC 29 + +#define PHY_INT_MASK 30 +#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040) +#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010) +#define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \ + PHY_INT_MASK_LINK_DOWN_) + +/* USB Vendor Requests */ +#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0 +#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1 + +/* Some extra defines */ +#define HS_USB_PKT_SIZE 512 +#define FS_USB_PKT_SIZE 64 +#define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) +#define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) +#define DEFAULT_BULK_IN_DELAY 0x00002000 +#define MAX_SINGLE_PACKET_SIZE 2048 +#define EEPROM_MAC_OFFSET 0x01 +#define SMSC95XX_INTERNAL_PHY_ID 1 +#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */ + +/* local defines */ +#define SMSC95XX_BASE_NAME "sms" +#define USB_CTRL_SET_TIMEOUT 5000 +#define USB_CTRL_GET_TIMEOUT 5000 +#define USB_BULK_SEND_TIMEOUT 5000 +#define USB_BULK_RECV_TIMEOUT 5000 + +#define AX_RX_URB_SIZE 2048 +#define PHY_CONNECT_TIMEOUT 5000 + +#define TURBO_MODE + +/* local vars */ +static int curr_eth_dev; /* index for name of next device detected */ + + +/* + * Smsc95xx infrastructure commands + */ +static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data) +{ + int len; + + cpu_to_le32s(&data); + + len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0), + USB_VENDOR_REQUEST_WRITE_REGISTER, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 00, index, &data, sizeof(data), USB_CTRL_SET_TIMEOUT); + if (len != sizeof(data)) { + debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d", + index, data, len); + return -1; + } + return 0; +} + +static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data) +{ + int len; + + len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0), + USB_VENDOR_REQUEST_READ_REGISTER, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 00, index, data, sizeof(data), USB_CTRL_GET_TIMEOUT); + if (len != sizeof(data)) { + debug("smsc95xx_read_reg failed: index=%d, len=%d", + index, len); + return -1; + } + + le32_to_cpus(data); + return 0; +} + +/* Loop until the read is completed with timeout */ +static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev) +{ + unsigned long start_time = get_timer(0); + u32 val; + + do { + smsc95xx_read_reg(dev, MII_ADDR, &val); + if (!(val & MII_BUSY_)) + return 0; + } while (get_timer(start_time) < 1 * 1000 * 1000); + + return -1; +} + +static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx) +{ + u32 val, addr; + + /* confirm MII not busy */ + if (smsc95xx_phy_wait_not_busy(dev)) { + debug("MII is busy in smsc95xx_mdio_read\n"); + return -1; + } + + /* set the address, index & direction (read from PHY) */ + addr = (phy_id << 11) | (idx << 6) | MII_READ_; + smsc95xx_write_reg(dev, MII_ADDR, addr); + + if (smsc95xx_phy_wait_not_busy(dev)) { + debug("Timed out reading MII reg %02X\n", idx); + return -1; + } + + smsc95xx_read_reg(dev, MII_DATA, &val); + + return (u16)(val & 0xFFFF); +} + +static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx, + int regval) +{ + u32 val, addr; + + /* confirm MII not busy */ + if (smsc95xx_phy_wait_not_busy(dev)) { + debug("MII is busy in smsc95xx_mdio_write\n"); + return; + } + + val = regval; + smsc95xx_write_reg(dev, MII_DATA, val); + + /* set the address, index & direction (write to PHY) */ + addr = (phy_id << 11) | (idx << 6) | MII_WRITE_; + smsc95xx_write_reg(dev, MII_ADDR, addr); + + if (smsc95xx_phy_wait_not_busy(dev)) + debug("Timed out writing MII reg %02X\n", idx); +} + +static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev) +{ + unsigned long start_time = get_timer(0); + u32 val; + + do { + smsc95xx_read_reg(dev, E2P_CMD, &val); + if (!(val & E2P_CMD_LOADED_)) { + debug("No EEPROM present\n"); + return -1; + } + if (!(val & E2P_CMD_BUSY_)) + return 0; + udelay(40); + } while (get_timer(start_time) < 1 * 1000 * 1000); + + debug("EEPROM is busy\n"); + return -1; +} + +static int smsc95xx_wait_eeprom(struct ueth_data *dev) +{ + unsigned long start_time = get_timer(0); + u32 val; + + do { + smsc95xx_read_reg(dev, E2P_CMD, &val); + if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_)) + break; + udelay(40); + } while (get_timer(start_time) < 1 * 1000 * 1000); + + if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) { + debug("EEPROM read operation timeout\n"); + return -1; + } + return 0; +} + +static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length, + u8 *data) +{ + u32 val; + int i, ret; + + ret = smsc95xx_eeprom_confirm_not_busy(dev); + if (ret) + return ret; + + for (i = 0; i < length; i++) { + val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_); + smsc95xx_write_reg(dev, E2P_CMD, val); + + ret = smsc95xx_wait_eeprom(dev); + if (ret < 0) + return ret; + + smsc95xx_read_reg(dev, E2P_DATA, &val); + data[i] = val & 0xFF; + offset++; + } + return 0; +} + +/* + * mii_nway_restart - restart NWay (autonegotiation) for this interface + * + * Returns 0 on success, negative on error. + */ +static int mii_nway_restart(struct ueth_data *dev) +{ + int bmcr; + int r = -1; + + /* if autoneg is off, it's an error */ + bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR); + + if (bmcr & BMCR_ANENABLE) { + bmcr |= BMCR_ANRESTART; + smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr); + r = 0; + } + return r; +} + +static int smsc95xx_phy_initialize(struct ueth_data *dev) +{ + smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET); + smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + + /* read to clear */ + smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC); + + smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK, + PHY_INT_MASK_DEFAULT_); + mii_nway_restart(dev); + + debug("phy initialised succesfully\n"); + return 0; +} + +static int smsc95xx_init_mac_address(struct eth_device *eth, + struct ueth_data *dev) +{ + /* try reading mac address from EEPROM */ + if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, + eth->enetaddr) == 0) { + if (is_valid_ether_addr(eth->enetaddr)) { + /* eeprom values are valid so use them */ + debug("MAC address read from EEPROM\n"); + return 0; + } + } + + /* + * No eeprom, or eeprom values are invalid. Generating a random MAC + * address is not safe. Just return an error. + */ + return -1; +} + +static int smsc95xx_write_hwaddr(struct eth_device *eth) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + u32 addr_lo, addr_hi; + int ret; + + /* set hardware address */ + debug("** %s()\n", __func__); + addr_lo = cpu_to_le32(*((u32 *)eth->enetaddr)); + addr_hi = cpu_to_le16(*((u16 *)(eth->enetaddr + 4))); + ret = smsc95xx_write_reg(dev, ADDRL, addr_lo); + if (ret < 0) { + debug("Failed to write ADDRL: %d\n", ret); + return ret; + } + + ret = smsc95xx_write_reg(dev, ADDRH, addr_hi); + if (ret < 0) + return ret; + debug("MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + eth->enetaddr[0], eth->enetaddr[1], + eth->enetaddr[2], eth->enetaddr[3], + eth->enetaddr[4], eth->enetaddr[5]); + dev->have_hwaddr = 1; + return 0; +} + +/* Enable or disable Tx & Rx checksum offload engines */ +static int smsc95xx_set_csums(struct ueth_data *dev, + int use_tx_csum, int use_rx_csum) +{ + u32 read_buf; + int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf); + if (ret < 0) + return ret; + + if (use_tx_csum) + read_buf |= Tx_COE_EN_; + else + read_buf &= ~Tx_COE_EN_; + + if (use_rx_csum) + read_buf |= Rx_COE_EN_; + else + read_buf &= ~Rx_COE_EN_; + + ret = smsc95xx_write_reg(dev, COE_CR, read_buf); + if (ret < 0) + return ret; + + debug("COE_CR = 0x%08x\n", read_buf); + return 0; +} + +static void smsc95xx_set_multicast(struct ueth_data *dev) +{ + /* No multicast in u-boot */ + dev->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_); +} + +/* starts the TX path */ +static void smsc95xx_start_tx_path(struct ueth_data *dev) +{ + u32 reg_val; + + /* Enable Tx at MAC */ + dev->mac_cr |= MAC_CR_TXEN_; + + smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr); + + /* Enable Tx at SCSRs */ + reg_val = TX_CFG_ON_; + smsc95xx_write_reg(dev, TX_CFG, reg_val); +} + +/* Starts the Receive path */ +static void smsc95xx_start_rx_path(struct ueth_data *dev) +{ + dev->mac_cr |= MAC_CR_RXEN_; + smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr); +} + +/* + * Smsc95xx callbacks + */ +static int smsc95xx_init(struct eth_device *eth, bd_t *bd) +{ + int ret; + u32 write_buf; + u32 read_buf; + u32 burst_cap; + int timeout; + struct ueth_data *dev = (struct ueth_data *)eth->priv; +#define TIMEOUT_RESOLUTION 50 /* ms */ + int link_detected; + + debug("** %s()\n", __func__); + dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */ + + write_buf = HW_CFG_LRST_; + ret = smsc95xx_write_reg(dev, HW_CFG, write_buf); + if (ret < 0) + return ret; + + timeout = 0; + do { + ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); + if (ret < 0) + return ret; + udelay(10 * 1000); + timeout++; + } while ((read_buf & HW_CFG_LRST_) && (timeout < 100)); + + if (timeout >= 100) { + debug("timeout waiting for completion of Lite Reset\n"); + return -1; + } + + write_buf = PM_CTL_PHY_RST_; + ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf); + if (ret < 0) + return ret; + + timeout = 0; + do { + ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf); + if (ret < 0) + return ret; + udelay(10 * 1000); + timeout++; + } while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100)); + if (timeout >= 100) { + debug("timeout waiting for PHY Reset\n"); + return -1; + } + if (!dev->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0) + dev->have_hwaddr = 1; + if (!dev->have_hwaddr) { + puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n"); + return -1; + } + if (smsc95xx_write_hwaddr(eth) < 0) + return -1; + + ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from HW_CFG : 0x%08x\n", read_buf); + + read_buf |= HW_CFG_BIR_; + ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from HW_CFG after writing " + "HW_CFG_BIR_: 0x%08x\n", read_buf); + +#ifdef TURBO_MODE + if (dev->pusb_dev->speed == USB_SPEED_HIGH) { + burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; + dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; + } else { + burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; + dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; + } +#else + burst_cap = 0; + dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; +#endif + debug("rx_urb_size=%ld\n", (ulong)dev->rx_urb_size); + + ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf); + + read_buf = DEFAULT_BULK_IN_DELAY; + ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from BULK_IN_DLY after writing: " + "0x%08x\n", read_buf); + + ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from HW_CFG: 0x%08x\n", read_buf); + +#ifdef TURBO_MODE + read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_); +#endif + read_buf &= ~HW_CFG_RXDOFF_; + + /* set Rx data offset=2, Make IP header aligns on word boundary. */ +#define NET_IP_ALIGN 2 + read_buf |= NET_IP_ALIGN << 9; + + ret = smsc95xx_write_reg(dev, HW_CFG, read_buf); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf); + if (ret < 0) + return ret; + debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf); + + write_buf = 0xFFFFFFFF; + ret = smsc95xx_write_reg(dev, INT_STS, write_buf); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, ID_REV, &read_buf); + if (ret < 0) + return ret; + debug("ID_REV = 0x%08x\n", read_buf); + + /* Init Tx */ + write_buf = 0; + ret = smsc95xx_write_reg(dev, FLOW, write_buf); + if (ret < 0) + return ret; + + read_buf = AFC_CFG_DEFAULT; + ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf); + if (ret < 0) + return ret; + + ret = smsc95xx_read_reg(dev, MAC_CR, &dev->mac_cr); + if (ret < 0) + return ret; + + /* Init Rx. Set Vlan */ + write_buf = (u32)ETH_P_8021Q; + ret = smsc95xx_write_reg(dev, VLAN1, write_buf); + if (ret < 0) + return ret; + + /* Disable checksum offload engines */ + ret = smsc95xx_set_csums(dev, 0, 0); + if (ret < 0) { + debug("Failed to set csum offload: %d\n", ret); + return ret; + } + smsc95xx_set_multicast(dev); + + if (smsc95xx_phy_initialize(dev) < 0) + return -1; + ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf); + if (ret < 0) + return ret; + + /* enable PHY interrupts */ + read_buf |= INT_EP_CTL_PHY_INT_; + + ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf); + if (ret < 0) + return ret; + + smsc95xx_start_tx_path(dev); + smsc95xx_start_rx_path(dev); + + timeout = 0; + do { + link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR) + & BMSR_LSTATUS; + if (!link_detected) { + if (timeout == 0) + printf("Waiting for Ethernet connection... "); + udelay(TIMEOUT_RESOLUTION * 1000); + timeout += TIMEOUT_RESOLUTION; + } + } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); + if (link_detected) { + if (timeout != 0) + printf("done.\n"); + } else { + printf("unable to connect.\n"); + return -1; + } + return 0; +} + +static int smsc95xx_send(struct eth_device *eth, volatile void* packet, + int length) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + int err; + int actual_len; + u32 tx_cmd_a; + u32 tx_cmd_b; + unsigned char msg[PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)]; + + debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); + if (length > PKTSIZE) + return -1; + + tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_; + tx_cmd_b = (u32)length; + cpu_to_le32s(&tx_cmd_a); + cpu_to_le32s(&tx_cmd_b); + + /* prepend cmd_a and cmd_b */ + memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a)); + memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b)); + memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet, + length); + err = usb_bulk_msg(dev->pusb_dev, + usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), + (void *)msg, + length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), + &actual_len, + USB_BULK_SEND_TIMEOUT); + debug("Tx: len = %u, actual = %u, err = %d\n", + length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), + actual_len, err); + return err; +} + +static int smsc95xx_recv(struct eth_device *eth) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + static unsigned char recv_buf[AX_RX_URB_SIZE]; + unsigned char *buf_ptr; + int err; + int actual_len; + u32 packet_len; + int cur_buf_align; + + debug("** %s()\n", __func__); + err = usb_bulk_msg(dev->pusb_dev, + usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), + (void *)recv_buf, + AX_RX_URB_SIZE, + &actual_len, + USB_BULK_RECV_TIMEOUT); + debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE, + actual_len, err); + if (err != 0) { + debug("Rx: failed to receive\n"); + return -1; + } + if (actual_len > AX_RX_URB_SIZE) { + debug("Rx: received too many bytes %d\n", actual_len); + return -1; + } + + buf_ptr = recv_buf; + while (actual_len > 0) { + /* + * 1st 4 bytes contain the length of the actual data plus error + * info. Extract data length. + */ + if (actual_len < sizeof(packet_len)) { + debug("Rx: incomplete packet length\n"); + return -1; + } + memcpy(&packet_len, buf_ptr, sizeof(packet_len)); + le32_to_cpus(&packet_len); + if (packet_len & RX_STS_ES_) { + debug("Rx: Error header=%#x", packet_len); + return -1; + } + packet_len = ((packet_len & RX_STS_FL_) >> 16); + + if (packet_len > actual_len - sizeof(packet_len)) { + debug("Rx: too large packet: %d\n", packet_len); + return -1; + } + + /* Notify net stack */ + NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4); + + /* Adjust for next iteration */ + actual_len -= sizeof(packet_len) + packet_len; + buf_ptr += sizeof(packet_len) + packet_len; + cur_buf_align = (int)buf_ptr - (int)recv_buf; + + if (cur_buf_align & 0x03) { + int align = 4 - (cur_buf_align & 0x03); + + actual_len -= align; + buf_ptr += align; + } + } + return err; +} + +static void smsc95xx_halt(struct eth_device *eth) +{ + debug("** %s()\n", __func__); +} + +/* + * SMSC probing functions + */ +void smsc95xx_eth_before_probe(void) +{ + curr_eth_dev = 0; +} + +struct smsc95xx_dongle { + unsigned short vendor; + unsigned short product; +}; + +static const struct smsc95xx_dongle smsc95xx_dongles[] = { + { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */ + { 0x0424, 0x9500 }, /* LAN9500 Ethernet */ + { 0x0000, 0x0000 } /* END - Do not remove */ +}; + +/* Probe to see if a new device is actually an SMSC device */ +int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss) +{ + struct usb_interface *iface; + struct usb_interface_descriptor *iface_desc; + int i; + + /* let's examine the device now */ + iface = &dev->config.if_desc[ifnum]; + iface_desc = &dev->config.if_desc[ifnum].desc; + + for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) { + if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor && + dev->descriptor.idProduct == smsc95xx_dongles[i].product) + /* Found a supported dongle */ + break; + } + if (smsc95xx_dongles[i].vendor == 0) + return 0; + + /* At this point, we know we've got a live one */ + debug("\n\nUSB Ethernet device detected\n"); + memset(ss, '\0', sizeof(struct ueth_data)); + + /* Initialize the ueth_data structure with some useful info */ + ss->ifnum = ifnum; + ss->pusb_dev = dev; + ss->subclass = iface_desc->bInterfaceSubClass; + ss->protocol = iface_desc->bInterfaceProtocol; + + /* + * We are expecting a minimum of 3 endpoints - in, out (bulk), and int. + * We will ignore any others. + */ + for (i = 0; i < iface_desc->bNumEndpoints; i++) { + /* is it an BULK endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { + if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN) + ss->ep_in = + iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + else + ss->ep_out = + iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + } + + /* is it an interrupt endpoint? */ + if ((iface->ep_desc[i].bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { + ss->ep_int = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ss->irqinterval = iface->ep_desc[i].bInterval; + } + } + debug("Endpoints In %d Out %d Int %d\n", + ss->ep_in, ss->ep_out, ss->ep_int); + + /* Do some basic sanity checks, and bail if we find a problem */ + if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || + !ss->ep_in || !ss->ep_out || !ss->ep_int) { + debug("Problems with device\n"); + return 0; + } + dev->privptr = (void *)ss; + return 1; +} + +int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *eth) +{ + debug("** %s()\n", __func__); + if (!eth) { + debug("%s: missing parameter.\n", __func__); + return 0; + } + sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++); + eth->init = smsc95xx_init; + eth->send = smsc95xx_send; + eth->recv = smsc95xx_recv; + eth->halt = smsc95xx_halt; + eth->priv = ss; + return 1; +} diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index 68a0883..7b55da3 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -45,6 +45,13 @@ static const struct usb_eth_prob_dev prob_dev[] = { .get_info = asix_eth_get_info, }, #endif +#ifdef CONFIG_USB_ETHER_SMSC95XX + { + .before_probe = smsc95xx_eth_before_probe, + .probe = smsc95xx_eth_probe, + .get_info = smsc95xx_eth_get_info, + }, +#endif { }, /* END */ };
diff --git a/include/usb_ether.h b/include/usb_ether.h index 825c275..a7fb26b 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -51,6 +51,11 @@ struct ueth_data { unsigned char irqinterval; /* Intervall for IRQ Pipe */
/* private fields for each driver can go here if needed */ +#ifdef CONFIG_USB_ETHER_SMSC95XX + size_t rx_urb_size; /* maximum USB URB size */ + u32 mac_cr; /* MAC control register value */ + int have_hwaddr; /* 1 if we have a hardware MAC address */ +#endif };
/* @@ -65,4 +70,12 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, struct eth_device *eth); #endif
+#ifdef CONFIG_USB_ETHER_SMSC95XX +void smsc95xx_eth_before_probe(void); +int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum, + struct ueth_data *ss); +int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss, + struct eth_device *eth); +#endif + #endif /* __USB_ETHER_H__ */
Built-in Ethernet adapters support setting the mac address by means of a ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
This adds similar support to the USB network side, using the names usbethaddr, usbeth1addr, etc. They are kept separate since we don't want a USB device taking the MAC address of a built-in device or vice versa.
TEST=build, test on harmony, with setenv usbethaddr c0:c1:c0:13:0b:b8, bootp, tftp ...
Signed-off-by: Simon Glass sjg@chromium.org --- board/davinci/common/misc.c | 2 +- drivers/net/designware.c | 2 +- drivers/usb/eth/usb_ether.c | 9 +++++- include/net.h | 25 ++++++++++++++++- net/eth.c | 64 ++++++++++++++++++++++++++----------------- 5 files changed, 72 insertions(+), 30 deletions(-)
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index 2bfdf23..53d6aa1 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -101,7 +101,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) { uint8_t env_enetaddr[6];
- eth_getenv_enetaddr_by_index(0, env_enetaddr); + eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr); if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) { /* There is no MAC address in the environment, so we initialize * it from the value in the EEPROM. */ diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 3f5eeb7..02ba393 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -500,7 +500,7 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr) dev->iobase = (int)base_addr; dev->priv = priv;
- eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]); + eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
priv->dev = dev; priv->mac_regs_p = (struct eth_mac_regs *)base_addr; diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c index 7b55da3..6565ea5 100644 --- a/drivers/usb/eth/usb_ether.c +++ b/drivers/usb/eth/usb_ether.c @@ -80,6 +80,7 @@ int is_eth_dev_on_usb_host(void) */ static void probe_valid_drivers(struct usb_device *dev) { + struct eth_device *eth; int j;
for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) { @@ -88,9 +89,10 @@ static void probe_valid_drivers(struct usb_device *dev) /* * ok, it is a supported eth device. Get info and fill it in */ + eth = &usb_eth[usb_max_eth_dev].eth_dev; if (prob_dev[j].get_info(dev, &usb_eth[usb_max_eth_dev], - &usb_eth[usb_max_eth_dev].eth_dev)) { + eth)) { /* found proper driver */ /* register with networking stack */ usb_max_eth_dev++; @@ -100,7 +102,10 @@ static void probe_valid_drivers(struct usb_device *dev) * call since eth_current_changed (internally called) * relies on it */ - eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev); + eth_register(eth); + if (eth_write_hwaddr(eth, "usbeth", + usb_max_eth_dev - 1)) + puts("Warning: failed to set MAC address\n"); break; } } diff --git a/include/net.h b/include/net.h index 95ef8ab..842a017 100644 --- a/include/net.h +++ b/include/net.h @@ -123,7 +123,18 @@ extern int eth_get_dev_index (void); /* get the device index */ extern void eth_parse_enetaddr(const char *addr, uchar *enetaddr); extern int eth_getenv_enetaddr(char *name, uchar *enetaddr); extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr); -extern int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr); + +/* + * Get the hardware address for an ethernet interface . + * Args: + * base_name - base name for device (normally "eth") + * index - device index number (0 for first) + * enetaddr - returns 6 byte hardware address + * Returns: + * Return true if the address is valid. + */ +extern int eth_getenv_enetaddr_by_index(const char *base_name, int index, + uchar *enetaddr);
extern int usb_eth_initialize(bd_t *bi); extern int eth_init(bd_t *bis); /* Initialize the device */ @@ -136,6 +147,18 @@ extern int eth_rx(void); /* Check for received packets */ extern void eth_halt(void); /* stop SCC */ extern char *eth_get_name(void); /* get name of current device */
+/* + * Set the hardware address for an ethernet interface based on 'eth%daddr' + * environment variable (or just 'ethaddr' if eth_number is 0). + * Args: + * base_name - base name for device (normally "eth") + * eth_number - value of %d (0 for first device of this type) + * Returns: + * 0 is success, non-zero is error status from driver. + */ +int eth_write_hwaddr(struct eth_device *dev, const char *base_name, + int eth_number); + #ifdef CONFIG_MCAST_TFTP int eth_mcast_join( IPaddr_t mcast_addr, u8 join); u32 ether_crc (size_t len, unsigned char const *p); diff --git a/net/eth.c b/net/eth.c index 3a7ff50..c271b85 100644 --- a/net/eth.c +++ b/net/eth.c @@ -53,10 +53,11 @@ int eth_setenv_enetaddr(char *name, const uchar *enetaddr) return setenv(name, buf); }
-int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr) +int eth_getenv_enetaddr_by_index(const char *base_name, int index, + uchar *enetaddr) { char enetvar[32]; - sprintf(enetvar, index ? "eth%daddr" : "ethaddr", index); + sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index); return eth_getenv_enetaddr(enetvar, enetaddr); }
@@ -187,6 +188,38 @@ static void eth_current_changed(void) #endif }
+int eth_write_hwaddr(struct eth_device *dev, const char *base_name, + int eth_number) +{ + unsigned char env_enetaddr[6]; + int ret = 0; + + if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr)) + return -1; + + if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) { + if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) && + memcmp(dev->enetaddr, env_enetaddr, 6)) { + printf("\nWarning: %s MAC addresses don't match:\n", + dev->name); + printf("Address in SROM is %pM\n", + dev->enetaddr); + printf("Address in environment is %pM\n", + env_enetaddr); + } + + memcpy(dev->enetaddr, env_enetaddr, 6); + } + + if (dev->write_hwaddr && + !eth_mac_skip(eth_number) && + is_valid_ether_addr(dev->enetaddr)) { + ret = dev->write_hwaddr(dev); + } + + return ret; +} + int eth_register(struct eth_device *dev) { struct eth_device *d; @@ -207,7 +240,6 @@ int eth_register(struct eth_device *dev)
int eth_initialize(bd_t *bis) { - unsigned char env_enetaddr[6]; int eth_number = 0;
eth_devices = NULL; @@ -258,27 +290,8 @@ int eth_initialize(bd_t *bis) if (strchr(dev->name, ' ')) puts("\nWarning: eth device name has a space!\n");
- eth_getenv_enetaddr_by_index(eth_number, env_enetaddr); - - if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) { - if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) && - memcmp(dev->enetaddr, env_enetaddr, 6)) - { - printf ("\nWarning: %s MAC addresses don't match:\n", - dev->name); - printf ("Address in SROM is %pM\n", - dev->enetaddr); - printf ("Address in environment is %pM\n", - env_enetaddr); - } - - memcpy(dev->enetaddr, env_enetaddr, 6); - } - if (dev->write_hwaddr && - !eth_mac_skip(eth_number) && - is_valid_ether_addr(dev->enetaddr)) { - dev->write_hwaddr(dev); - } + if (eth_write_hwaddr(dev, NULL, eth_number)) + puts("Warning: failed to set MAC address\n");
eth_number++; dev = dev->next; @@ -353,7 +366,8 @@ int eth_init(bd_t *bis) do { uchar env_enetaddr[6];
- if (eth_getenv_enetaddr_by_index(eth_number, env_enetaddr)) + if (eth_getenv_enetaddr_by_index("eth", eth_number, + env_enetaddr)) memcpy(dev->enetaddr, env_enetaddr, 6);
++eth_number;
This describes what it is for, devices supported, how to enable for your board in U-Boot, setting up the server, and notes about MAC addresses.
Signed-off-by: Simon Glass sjg@chromium.org --- doc/README.usb | 164 +++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 163 insertions(+), 1 deletions(-)
diff --git a/doc/README.usb b/doc/README.usb index 9aa4f62..d30e696 100644 --- a/doc/README.usb +++ b/doc/README.usb @@ -79,4 +79,166 @@ CONFIG_USB_UHCI defines the lowlevel part.A lowlevel part must be defined if using CONFIG_CMD_USB CONFIG_USB_KEYBOARD enables the USB Keyboard CONFIG_USB_STORAGE enables the USB storage devices -CONFIG_USB_HOST_ETHER enables USB ethernet dongle support +CONFIG_USB_HOST_ETHER enables USB ethernet adapter support + + +USB Host Networking +=================== + +If you have a supported USB Ethernet adapter you can use it in U-Boot +to obtain an IP address and load a kernel from a network server. + +USB Host Networking is different from making your board act as a USB +client. In that case your board is pretending to be an Ethernet adapter +and will appear as a network interface to an attached computer. The +connection is via a USB cable with the computer acting as the host. + +With USB Host Networking, your board is the USB host. It controls the +Ethernet adapter to which it is directly connected and the connection to +the outside world is your adapter's Ethernet cable. Your board becomes a +first class network device, able to connect and perform network +operations independently of your computer. + + +Device support +-------------- + +Currently supported devices are listed in the drivers according to +their vendor and product IDs. You can check your device by connecting it +to a Linux machine and typing 'lsusb'. The drivers are in +drivers/usb/eth. + +For example this lsusb output line shows a device with Vendor ID 0x0x95 +and product ID 0x7720: + +Bus 002 Device 010: ID 0b95:7720 ASIX Electronics Corp. AX88772 + +If you look at drivers/usb/eth/asix.c you will see this line within the +supported device list, so we know this adapter is supported. + + { 0x0b95, 0x7720 }, /* Trendnet TU2-ET100 V3.0R */ + +If your adapter is not listed there is a still a chance that it will +work. Try looking up the manufacturer of the chip inside your adapter. +or take the adapter apart and look for chip markings. Then add a line +for your vendor/product ID into the table of the appropriate driver, +build U-Boot and see if it works. If not then there might be differences +between the chip in your adapter and the driver. You could try to get a +datasheet for your device and add support for it to U-Boot. This is not +particularly difficult - you only need to provide support for four basic +functions: init, halt, send and recv. + + +Enabling USB Host Networking +---------------------------- + +The normal U-Boot commands are used with USB networking, but you must +start USB first. For example: + +usb start +setenv bootfile /tftpboot/uImage +setenv autoload y +bootp + + +(The autoload option makes bootp automatically load the boot file.) + +To enable USB Host Ethernet in U-Boot, your platform must of course +support USB with CONFIG_CMD_USB enabled and working. You will need to +add some config settings to your board header file: + +#define CONFIG_USB_HOST_ETHER /* Enable USB Ethernet adapters */ +#define CONFIG_USB_ETHER_ASIX /* Asix, or whatever driver(s) you want */ + +You will also want to enable the network commands: + +#define CONFIG_CMD_NET +#define CONFIG_NET_MULTI +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +and some bootp options, which tell your board to obtain its subnet, +gateway IP, host name and boot path from the bootp/dhcp server: + +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH + +You should also set the default IP address of your board and the server +as well as the default file to load when a 'bootp' command is issued. + +#define CONFIG_IPADDR 10.0.0.2 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_BOOTFILE uImage + + +The 'usb start' command should identify the adapter something like this: + +CrOS> usb start +(Re)start USB... +USB EHCI 1.00 +scanning bus for devices... 3 USB Device(s) found + scanning bus for storage devices... 0 Storage Device(s) found + scanning bus for ethernet devices... 1 Ethernet Device(s) found +CrOS> print ethact +ethact=asx0 + +You can see that it found an ethernet device and we can print out the +device name (asx0 in this case). + +Then 'bootp' should use it to obtain an IP address from DHCP, perhaps +something like this: + +CrOS> bootp +Waiting for Ethernet connection... done. +BOOTP broadcast 1 +BOOTP broadcast 2 +DHCP client bound to address 172.22.73.81 +Using asx0 device +TFTP from server 172.22.72.144; our IP address is 172.22.73.81 +Filename '/tftpboot/uImage-sjg-seaboard-261347'. +Load address: 0x40c000 +Loading: ################################################################# + ################################################################# + ################################################################# + ################################################ +done +Bytes transferred = 3557464 (364858 hex) +CrOS> + + +MAC Addresses +------------- + +Most Ethernet dongles have a built-in MAC address which is unique in the +world. This is important so that devices on the network can be +distinguised from each other. MAC address conflicts are evil and +generally result in strange and eratic behaviour. + +Some boards have USB Ethernet chips on-board, and these sometimes do not +have an assigned MAC address. In this case it is up to you to assign +one which is unique. You should obtain a valid MAC address from a range +assigned to you before you ship the product. + +Built-in Ethernet adapters support setting the MAC address by means of +an ethaddr environment variable for each interface (ethaddr, eth1addr, +eth2addr). There is similar support on the USB network side, using the +names usbethaddr, usbeth1addr, etc. They are kept separate since we +don't want a USB device taking the MAC address of a built-in device or +vice versa. + +So if your USB Ethernet chip doesn't have a MAC address available then +you must set usbethaddr to a suitable MAC address. At the time of +writing this functionality is only supported by the SMSC driver. + + +Server Setup +------------ + +For setting up the server side (dhcpd, tftpd, nfsd) you might find this +Chromium OS page useful: + +http://www.chromium.org/network-based-development + +>>>>>>> 232452a... Add documentation for USB Host Networking
Dear Simon Glass,
In message 1303266585-15701-3-git-send-email-sjg@chromium.org you wrote:
This describes what it is for, devices supported, how to enable for your board in U-Boot, setting up the server, and notes about MAC addresses.
Signed-off-by: Simon Glass sjg@chromium.org
doc/README.usb | 164 +++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 files changed, 163 insertions(+), 1 deletions(-)
You are supposed to provide a change log here. Please read http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions
My comments to the previous version still apply.
Best regards,
Wolfgang Denk
This is a small clean-up patch.
TEST=Build U-Boot, try bootp and check it auto-loads.
Signed-off-by: Simon Glass sjg@chromium.org --- net/bootp.c | 76 +++++++++++++++++++++++++--------------------------------- 1 files changed, 33 insertions(+), 43 deletions(-)
diff --git a/net/bootp.c b/net/bootp.c index 1a71786..a3d0e63 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -137,6 +137,36 @@ static int truncate_sz (const char *name, int maxlen, int curlen) return (curlen); }
+/* + * Check if autoload is enabled. If so, use either NFS or TFTP to download + * the boot file. + */ +static void auto_load(void) +{ + char *s = getenv("autoload"); + + if (s != NULL) { + if (*s == 'n') { + /* + * Just use BOOTP to configure system; + * Do not use TFTP to load the bootfile. + */ + NetState = NETLOOP_SUCCESS; + return; +#if defined(CONFIG_CMD_NFS) + } else if (strcmp(s, "NFS") == 0) { + /* + * Use NFS to load the bootfile. + */ + NfsStart(); + return; +#endif + } + } + + TftpStart(); +} + #if !defined(CONFIG_CMD_DHCP)
static void BootpVendorFieldProcess (u8 * ext) @@ -278,6 +308,7 @@ static void BootpVendorProcess (u8 * ext, int size) if (NetBootFileSize) debug("NetBootFileSize: %d\n", NetBootFileSize); } + /* * Handle a BOOTP received packet. */ @@ -285,7 +316,6 @@ static void BootpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) { Bootp_t *bp; - char *s;
debug("got BOOTP packet (src=%d, dst=%d, len=%d want_len=%zu)\n", src, dest, len, sizeof (Bootp_t)); @@ -312,26 +342,7 @@ BootpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len)
debug("Got good BOOTP\n");
- if ((s = getenv("autoload")) != NULL) { - if (*s == 'n') { - /* - * Just use BOOTP to configure system; - * Do not use TFTP to load the bootfile. - */ - NetState = NETLOOP_SUCCESS; - return; -#if defined(CONFIG_CMD_NFS) - } else if (strcmp(s, "NFS") == 0) { - /* - * Use NFS to load the bootfile. - */ - NfsStart(); - return; -#endif - } - } - - TftpStart(); + auto_load(); } #endif
@@ -904,34 +915,13 @@ DhcpHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) debug("DHCP State: REQUESTING\n");
if ( DhcpMessageType((u8 *)bp->bp_vend) == DHCP_ACK ) { - char *s; - if (NetReadLong((ulong*)&bp->bp_vend[0]) == htonl(BOOTP_VENDOR_MAGIC)) DhcpOptionsProcess((u8 *)&bp->bp_vend[4], bp); BootpCopyNetParams(bp); /* Store net params from reply */ dhcp_state = BOUND; printf ("DHCP client bound to address %pI4\n", &NetOurIP);
- /* Obey the 'autoload' setting */ - if ((s = getenv("autoload")) != NULL) { - if (*s == 'n') { - /* - * Just use BOOTP to configure system; - * Do not use TFTP to load the bootfile. - */ - NetState = NETLOOP_SUCCESS; - return; -#if defined(CONFIG_CMD_NFS) - } else if (strcmp(s, "NFS") == 0) { - /* - * Use NFS to load the bootfile. - */ - NfsStart(); - return; -#endif - } - } - TftpStart(); + auto_load(); return; } break;
The Asix driver takes the link down during init() and then brings it back up. This commit changes this so that if a link has already been established successfully we simply check that the link is still good.
This reduces the delay between successive network commands.
TEST=bootp; tftp ... - see that delay is now shorter than before.
Signed-off-by: Simon Glass sjg@chromium.org --- drivers/usb/eth/asix.c | 36 +++++++++++++++++++++++------------- include/usb_ether.h | 5 +++-- 2 files changed, 26 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index 9b012e4..18e5457 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -307,20 +307,12 @@ static int mii_nway_restart(struct ueth_data *dev) return r; }
-/* - * Asix callbacks - */ -static int asix_init(struct eth_device *eth, bd_t *bd) +static int full_init(struct eth_device *eth) { + struct ueth_data *dev = (struct ueth_data *)eth->priv; int embd_phy; unsigned char buf[ETH_ALEN]; u16 rx_ctl; - struct ueth_data *dev = (struct ueth_data *)eth->priv; - int timeout = 0; -#define TIMEOUT_RESOLUTION 50 /* ms */ - int link_detected; - - debug("** %s()\n", __func__);
if (asix_write_gpio(dev, AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5) < 0) @@ -395,6 +387,25 @@ static int asix_init(struct eth_device *eth, bd_t *bd)
if (asix_write_rx_ctl(dev, AX_DEFAULT_RX_CTL) < 0) goto out_err; + return 0; +out_err: + return -1; +} + +/* + * Asix callbacks + */ +static int asix_init(struct eth_device *eth, bd_t *bd) +{ + struct ueth_data *dev = (struct ueth_data *)eth->priv; + int timeout = 0; +#define TIMEOUT_RESOLUTION 50 /* ms */ + int link_detected; + + debug("** %s()\n", __func__); + + if (!dev->has_been_running && full_init(eth)) + return -1;
do { link_detected = asix_mdio_read(dev, dev->phy_id, MII_BMSR) & @@ -411,12 +422,11 @@ static int asix_init(struct eth_device *eth, bd_t *bd) printf("done.\n"); } else { printf("unable to connect.\n"); - goto out_err; + return -1; }
+ dev->has_been_running = 1; return 0; -out_err: - return -1; }
static int asix_send(struct eth_device *eth, volatile void *packet, int length) diff --git a/include/usb_ether.h b/include/usb_ether.h index a7fb26b..73b085d 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -37,8 +37,9 @@
struct ueth_data { /* eth info */ - struct eth_device eth_dev; /* used with eth_register */ - int phy_id; /* mii phy id */ + struct eth_device eth_dev; /* used with eth_register */ + int phy_id; /* mii phy id */ + int has_been_running; /* 1 if we have had a link up */
/* usb info */ struct usb_device *pusb_dev; /* this usb_device */
participants (2)
-
Simon Glass -
Wolfgang Denk