[U-Boot] [PATCH] cfi_flash: avoid flash_verbose when possible
The flash_verbose logic is only used by the CFI MTD layer, so if we aren't using that, disable the logic completely.
Signed-off-by: Mike Frysinger vapier@gentoo.org --- drivers/mtd/cfi_flash.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 39c235e..b05264b 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -63,7 +63,11 @@ */
static uint flash_offset_cfi[2] = { FLASH_OFFSET_CFI, FLASH_OFFSET_CFI_ALT }; +#ifdef CONFIG_FLASH_CFI_MTD static uint flash_verbose = 1; +#else +#define flash_verbose 1 +#endif
flash_info_t flash_info[CFI_MAX_FLASH_BANKS]; /* FLASH chips info */
@@ -2016,10 +2020,12 @@ ulong flash_get_size (phys_addr_t base, int banknum) return (info->size); }
+#ifdef CONFIG_FLASH_CFI_MTD void flash_set_verbose(uint v) { flash_verbose = v; } +#endif
/*----------------------------------------------------------------------- */
Dear Mike Frysinger,
In message 1293028873-16231-1-git-send-email-vapier@gentoo.org you wrote:
The flash_verbose logic is only used by the CFI MTD layer, so if we aren't using that, disable the logic completely.
Signed-off-by: Mike Frysinger vapier@gentoo.org
drivers/mtd/cfi_flash.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
Applied, thanks.
Stefan, this is somewhat global and looks simple enough - hope this is OK with you.
Best regards,
Wolfgang Denk
Hi Wolfgang,
On Sunday 09 January 2011 18:05:42 Wolfgang Denk wrote:
The flash_verbose logic is only used by the CFI MTD layer, so if we aren't using that, disable the logic completely.
Signed-off-by: Mike Frysinger vapier@gentoo.org
drivers/mtd/cfi_flash.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
Applied, thanks.
Stefan, this is somewhat global and looks simple enough - hope this is OK with you.
No problem at all. Thanks.
Cheers, Stefan
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office@denx.de
participants (3)
-
Mike Frysinger -
Stefan Roese -
Wolfgang Denk