Enable CAAM in spl.

Signed-off-by: Leonard Anderweit l.anderweit@phytec.de --- board/phytec/phycore_imx8mp/spl.c | 2 ++ configs/phycore-imx8mp_defconfig | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c index 0610d8bbd0b8..cb8e450b9956 100644 --- a/board/phytec/phycore_imx8mp/spl.c +++ b/board/phytec/phycore_imx8mp/spl.c @@ -165,6 +165,8 @@ int power_init_board(void)

void spl_board_init(void) { + arch_misc_init(); + /* Set GIC clock to 500Mhz for OD VDD_SOC. */ clock_enable(CCGR_GIC, 0); clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5)); diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index ba716a6875b8..c0501907b2c4 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -52,7 +52,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 -# CONFIG_SPL_CRYPTO is not set CONFIG_SPL_I2C=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_POWER=y @@ -180,4 +179,3 @@ CONFIG_USB_GADGET_MANUFACTURER="PHYTEC" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_IMX_WATCHDOG=y -# CONFIG_SPL_SHA_HW_ACCEL is not set