Do *NOT* return after the "point of no return" has been passed. If something goes wrong, the board must be reset after that point. Move the "Transferring control to Linux" debug message back to where it belongs: just before transferring control to linux.

Signed-off-by: Gerald Van Baren vanbaren@cideas.com --- common/cmd_bootm.c | 130 +++++++++++++++++++++++++-------------------------- 1 files changed, 64 insertions(+), 66 deletions(-)

diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 25a55bd..25b9d74 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -45,8 +45,8 @@

DECLARE_GLOBAL_DATA_PTR;

- /*cmd_boot.c*/ - extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +/*cmd_boot.c*/ +extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);

#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_TIMESTAMP) #include <rtc.h> @@ -763,8 +763,8 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag,

if ((ntohl(hdr->ih_load) < ((unsigned long)hdr + ntohl(hdr->ih_size) + sizeof(hdr))) && ((ntohl(hdr->ih_load) + ntohl(hdr->ih_size)) > (unsigned long)hdr)) { - printf ("ERROR: Load address overwrites Flat Device Tree uImage\n"); - return; + puts ("ERROR: Load address overwrites Flat Device Tree uImage\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); }

printf(" Verifying Checksum ... "); @@ -773,34 +773,34 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, header.ih_hcrc = 0;

if(checksum != crc32(0, (uchar *)&header, sizeof(image_header_t))) { - printf("ERROR: Flat Device Tree header checksum is invalid\n"); - return; + puts ("ERROR: Flat Device Tree header checksum is invalid\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); }

checksum = ntohl(hdr->ih_dcrc); addr = (ulong)((uchar *)(hdr) + sizeof(image_header_t));

if(checksum != crc32(0, (uchar *)addr, ntohl(hdr->ih_size))) { - printf("ERROR: Flat Device Tree checksum is invalid\n"); - return; + puts ("ERROR: Flat Device Tree checksum is invalid\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } printf("OK\n");

if (ntohl(hdr->ih_type) != IH_TYPE_FLATDT) { - printf ("ERROR: uImage not Flat Device Tree type\n"); - return; + puts ("ERROR: uImage not Flat Device Tree type\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } if (ntohl(hdr->ih_comp) != IH_COMP_NONE) { - printf("ERROR: uImage is not uncompressed\n"); - return; + puts ("ERROR: uImage is not uncompressed\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #if defined(CONFIG_OF_LIBFDT) if (fdt_check_header(of_flat_tree + sizeof(image_header_t)) != 0) { #else if (*((ulong *)(of_flat_tree + sizeof(image_header_t))) != OF_DT_HEADER) { #endif - printf ("ERROR: uImage data is not a flat device tree\n"); - return; + puts ("ERROR: uImage data is not a flat device tree\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); }

memmove((void *)ntohl(hdr->ih_load), @@ -808,8 +808,8 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, ntohl(hdr->ih_size)); of_flat_tree = (char *)ntohl(hdr->ih_load); } else { - printf ("Did not find a flat flat device tree at address %08lX\n", of_flat_tree); - return; + puts ("Did not find a flat flat device tree\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } printf (" Booting using flat device tree at 0x%x\n", of_flat_tree); @@ -840,8 +840,8 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, #else if (((struct boot_param_header *)of_data)->magic != OF_DT_HEADER) { #endif - printf ("ERROR: image is not a flat device tree\n"); - return; + puts ("ERROR: image is not a flat device tree\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); }

#if defined(CONFIG_OF_LIBFDT) @@ -849,8 +849,8 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, #else if (((struct boot_param_header *)of_data)->totalsize != ntohl(len_ptr[2])) { #endif - printf ("ERROR: flat device tree size does not agree with image\n"); - return; + puts ("ERROR: flat device tree size does not agree with image\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } } #endif @@ -923,15 +923,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, initrd_end = 0; }

- debug ("## Transferring control to Linux (at address %08lx) ...\n", - (ulong)kernel); - - SHOW_BOOT_PROGRESS (15); - -#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) - unlock_ram_in_cache(); -#endif - #if defined(CONFIG_OF_LIBFDT) /* move of_flat_tree if needed */ if (of_data) { @@ -960,19 +951,19 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, * if the user wants it (the logic is in the subroutines). */ if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) { - printf("Failed creating the /chosen node (0x%08X), aborting.\n", of_flat_tree); - return; + puts ("ERROR: Failed creating the /chosen node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #ifdef CONFIG_OF_HAS_UBOOT_ENV if (fdt_env(of_flat_tree) < 0) { - printf("Failed creating the /u-boot-env node, aborting.\n"); - return; + puts ("ERROR: Failed creating the /u-boot-env node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #endif #ifdef CONFIG_OF_HAS_BD_T if (fdt_bd_t(of_flat_tree) < 0) { - printf("Failed creating the /bd_t node, aborting.\n"); - return; + puts ("ERROR: Failed creating the /bd_t node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #endif } @@ -997,55 +988,62 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, memmove ((void *)of_start, (void *)of_data, of_len); } #endif - - /* - * Linux Kernel Parameters (passing board info data): - * r3: ptr to board info data - * r4: initrd_start or 0 if no initrd - * r5: initrd_end - unused if r4 is 0 - * r6: Start of command line string - * r7: End of command line string - */ -#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) - if (!of_flat_tree) /* no device tree; boot old style */ -#endif - (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); - /* does not return */ - -#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) - /* - * Linux Kernel Parameters (passing device tree): - * r3: ptr to OF flat tree, followed by the board info data - * r4: physical pointer to the kernel itself - * r5: NULL - * r6: NULL - * r7: NULL - */ #if defined(CONFIG_OF_FLAT_TREE) ft_setup(of_flat_tree, kbd, initrd_start, initrd_end); /* ft_dump_blob(of_flat_tree); */ #endif #if defined(CONFIG_OF_LIBFDT) if (fdt_chosen(of_flat_tree, initrd_start, initrd_end, 0) < 0) { - printf("Failed creating the /chosen node (0x%08X), aborting.\n", of_flat_tree); - return; + puts ("ERROR: Failed to create the /chosen node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #ifdef CONFIG_OF_HAS_UBOOT_ENV if (fdt_env(of_flat_tree) < 0) { - printf("Failed creating the /u-boot-env node, aborting.\n"); - return; + puts ("ERROR: Failed to create the /u-boot-env node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #endif #ifdef CONFIG_OF_HAS_BD_T if (fdt_bd_t(of_flat_tree) < 0) { - printf("Failed creating the /bd_t node, aborting.\n"); - return; + puts ("ERROR: Failed to create the /bd_t node, aborting.\nMust RESET board to recover\n"); + do_reset (cmdtp, flag, argc, argv); } #endif #endif /* if defined(CONFIG_OF_LIBFDT) */

- (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); + debug ("## Transferring control to Linux (at address %08lx) ...\n", + (ulong)kernel); + + SHOW_BOOT_PROGRESS (15); + +#if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) + unlock_ram_in_cache(); #endif + +#if defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT) + if (of_flat_tree) { /* device tree; boot new style */ + /* + * Linux Kernel Parameters (passing device tree): + * r3: ptr to flattened device tree, followed by the board info data + * r4: physical pointer to the kernel itself + * r5: NULL + * r6: NULL + * r7: NULL + */ + (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); + /* does not return */ + } +#endif + /* + * Linux Kernel Parameters (passing board info data): + * r3: ptr to board info data + * r4: initrd_start or 0 if no initrd + * r5: initrd_end - unused if r4 is 0 + * r6: Start of command line string + * r7: End of command line string + */ + (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); + /* does not return */ } #endif /* CONFIG_PPC */