[PATCH v2] configs: Increase malloc size after relocation
Current default size of 0x100000 is not capable of getting the FIT buffer during boot when transitioning to using binman generated boot images for certain K3 devices, so increase it to 0x400000. Since A72 SPL is coming after relocation to DDR this should not be an issue for any K3 device, so make it default for all.
Signed-off-by: Neha Malcom Francis n-francis@ti.com --- Changes since v1: - added ARM64 to conditions to default to 0x400000
common/spl/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index a25d8fd2e0..3c2af453ab 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -385,6 +385,7 @@ config SPL_STACK_R_ADDR config SPL_STACK_R_MALLOC_SIMPLE_LEN depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE hex "Size of malloc_simple heap after switching to DRAM SPL stack" + default 0x400000 if ARCH_K3 && ARM64 default 0x100000 help Specify the amount of the stack to use as memory pool for
On 1/11/23 6:41 AM, Neha Malcom Francis wrote:
Current default size of 0x100000 is not capable of getting the FIT buffer during boot when transitioning to using binman generated boot images for certain K3 devices, so increase it to 0x400000. Since A72 SPL is coming after relocation to DDR this should not be an issue for any K3 device, so make it default for all.
Signed-off-by: Neha Malcom Francis n-francis@ti.com
Acked-by: Andrew Davis afd@ti.com
Changes since v1:
- added ARM64 to conditions to default to 0x400000
common/spl/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig index a25d8fd2e0..3c2af453ab 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -385,6 +385,7 @@ config SPL_STACK_R_ADDR config SPL_STACK_R_MALLOC_SIMPLE_LEN depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE hex "Size of malloc_simple heap after switching to DRAM SPL stack"
- default 0x400000 if ARCH_K3 && ARM64 default 0x100000 help Specify the amount of the stack to use as memory pool for
On Wed, Jan 11, 2023 at 06:11:23PM +0530, Neha Malcom Francis wrote:
Current default size of 0x100000 is not capable of getting the FIT buffer during boot when transitioning to using binman generated boot images for certain K3 devices, so increase it to 0x400000. Since A72 SPL is coming after relocation to DDR this should not be an issue for any K3 device, so make it default for all.
Signed-off-by: Neha Malcom Francis n-francis@ti.com Acked-by: Andrew Davis afd@ti.com
Applied to u-boot/master, thanks!
participants (3)
-
Andrew Davis -
Neha Malcom Francis -
Tom Rini