[U-Boot] Enc: Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
Uboot List,
Someone could help me as I wrap up this to solve my problem.
Best Regards
Perfeito, Alexander
________________________________ De: Alexandre N. Perfeito perfeitoan@hotmail.com Enviado: segunda-feira, 24 de julho de 2017 18:35 Para: Thomas Hoff Cc: Simon Glass Assunto: Re: [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
HI Thomas,
First of all thanks.
I not using SDcard. But this help some way check this out below:
My USB 32 G is partioned like this:
cgpt add -i 6 -b 64 -s 32768 -S 1 -P 5 -l KERN-A -t "kernel" /dev/sda6 --> 16 MB Space The MAIN TIP I ASK FOR cgpt add -i 7 -b 65600 -s $aroot_size -l ROOT-A -t "rootfs" /dev/sda7 --> 29.3GBSpace Roofs with (Ubunut Xenial Installed) and running chroot OK
See the information about the device USB:
/dev/sda6: PARTLABEL="KERN-A" PARTUUID="d43b02e7-af2d-3642-93d8-370d84193655" /dev/sda7: UUID="4100d9e3-55b9-4ce2-9312-117932369684" TYPE="ext4" PARTLABEL="ROOT-A" PARTUUID="a01d12a1-c0e2-d54c-b68a-6e24e3896ae2"
How I do to put this information you give me Below in e-mail before:
to you would boot a kernel from an ***sdcard that had uImage and tegra124-nyan-big.dtb in ***ext2 formatted partition on ***/dev/mmcblk1p3
***mmc dev 1 ; mmc rescan 1 ; ext2load mmc 1:3 0x81000000 uImage ; ext2load mmc 1:3 0x82000000 tegra124-nyan-big.dtb ; bootm 0x81000000 - 0x82000000
Because I using the sugestion 1 I did describe in e-mail below with Uboot and Kernel 3.10.x.x run like a charm.
*** Information to adapt for USB botting
How I do to Kernel 4.4.x.x
Best Regards
Perfeito , Alexander
________________________________ De: Thomas Hoff thomashoffltd@gmail.com Enviado: segunda-feira, 24 de julho de 2017 17:53 Para: Simon Glass Cc: Alexandre N. Perfeito; u-boot@lists.denx.de Assunto: Re: [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
Hey Alexandre,
Here is a link to a precompiled and signed non verified uboot for the nyan-big chromebook: https://drive.google.com/file/d/0B3uMpbwOyYIadEtPdVpHV1piWEU/view?usp=sharin...
This is how you would boot a kernel from an sdcard that had uImage and tegra124-nyan-big.dtb in ext2 formatted partition on /dev/mmcblk1p3 mmc dev 1 ; mmc rescan 1 ; ext2load mmc 1:3 0x81000000 uImage ; ext2load mmc 1:3 0x82000000 tegra124-nyan-big.dtb ; bootm 0x81000000 - 0x82000000
Hope that helps
On Fri, Jul 21, 2017 at 3:48 AM, Simon Glass <sjg@chromium.orgmailto:sjg@chromium.org> wrote: Hi Alexandre,
[...]
Hi , My Name is Alexander and i need some tip information about U-bootBoard Nyan-Big to runinng Linux v4.4.x.x.
Can you please resend this to the U-Boot mailing list and cc me?
Thanks, Simon
I compiled source 4.4.0.70 Ubuntu distribution in chroot environment in my chormebook Tegra Tk1. After compilation the generated files were the following:
[aperfeito@alarm boot]$ ls -l total 24992 -rw-r--r-- 1 root root 98874 Jul 13 14:54 config-4.4.70-ARCH -rw-r--r-- 1 root root 8277506 Jul 13 14:54 initrd.img-4.4.70-ARCH -rw-r--r-- 1 root root 2033244 Jul 13 14:54 System.map-4.4.70-ARCH -rw-r--r-- 1 root root 15175680 Jul 13 14:54 vmlinuz-4.4.70-ARCH
I also compiled the u-boot-tegra in the same environment in chroot Ubuntu Xenial distribution these were compiled according to the email of Tom Warren send before
Make 'nyan-big_defconfig' and everything ok as you see below the generated files:
[aperfeito@alarm u-boot-tegra]$ ls *.bin u-boot.bin u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin u-boot-dtb.bin u-boot-nodtb.bin u-boot-tegra.bin
Now is the tip I'm asking you: I have two suggestions on how to put this in the KERNEL partition of my USB. My USB has two partitions To 1st. KERNEL Name with 16 megabytes of space dev / sda6 A 2st. ROOFS Name approximately 29 Gigabytes of space where I worked to compile the UbuntuXenial and Uboot-Tegra srcs kernel as you see in the email.
Sugestion : 1 mkimage -D "-I dts -O dtb -p 2048" -f kernel.its vmlinux.uimg dd if=/dev/zero of=bootloader.bin bs=512 count=1 vbutil_kernel \ --pack vmlinux.kpart \ --version 1 \ --vmlinuz vmlinux.uimg \ --arch arm \ --keyblock kernel.keyblock \ --> How I do This if necessary --signprivate kernel_data_key.vbprivk \ --> How I do This if necessary --config cmdline \ --> TXT file whit this config below --bootloader bootloader.bin
kernel.its adjust to files below as given to te src kernel 4.4.0-70 ./arch/arm/boot/dts/tegra124-nyan-blaze.dtb ./arch/arm/boot/dts/tegra124-nyan-big.dtb ___________________________________________________TXT CONFIG FILE __________________________________________________ console=tty1 init=/sbin/init root=PARTUUID=%U/PARTNROFF=1 rootwait rw noinitrd lsm.module_locking=0 ## OR ### initrd=/boot/initrd.img-4.4.0-ARCH console=ttyS0,115200n8 console=tty1 ignore_loglevel earlyprintk cgroup_enable=memory root=/dev/sda7
### For config line need your sugestion with is the best.Sugestion: 2
I have to copy the kernel, generated initramfs, and dtb to the SDA6 partition and added the following kernel config to /dev/sda7/roofsparttion :/boot/extlinux/extlinux.conf
LABEL UbuntuXenial MENU LABEL UbuntuXenial on sda7 with 4.4 kernel LINUX /boot/vmlinuz-4.4.0 FDT /boot/dtb/tegra124-nyan-big.dtb APPEND initrd=/boot/initrd.img-4.4.0-ARCH console=ttyS0,115200n8 console=tty1 ignore_loglevel earlyprintk cgroup_enable=memory root=/dev/sda7
How to make U-boot-Tegra now Work with Kernel 4.4.x.x as v3.10.x.x Kernels booting on USB.
There is a series which shows how to do this for tegra and rockchip. It is at u-boot-dm/chain-working and you can find a README there as well.
The series has not been applied yet - I think it is in Tom Warren's queue?
Regards, Simon [...] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.demailto:U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
+Thomas
On 25 July 2017 at 12:01, Alexandre N. Perfeito perfeitoan@hotmail.com wrote:
Uboot List, Someone could help me as I wrap up this to solve my problem.Best Regards
Perfeito, Alexander
De: Alexandre N. Perfeito perfeitoan@hotmail.com Enviado: segunda-feira, 24 de julho de 2017 18:35 Para: Thomas Hoff Cc: Simon Glass Assunto: Re: [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
HI Thomas, First of all thanks. I not using SDcard. But this help some way check this out below: My USB 32 G is partioned like this: cgpt add -i 6 -b 64 -s 32768 -S 1 -P 5 -l KERN-A -t "kernel" /dev/sda6 --> 16 MB Space The MAIN TIP I ASK FOR cgpt add -i 7 -b 65600 -s $aroot_size -l ROOT-A -t "rootfs" /dev/sda7 --> 29.3GBSpace Roofs with (Ubunut Xenial Installed) and running chroot OK See the information about the device USB: /dev/sda6: PARTLABEL="KERN-A" PARTUUID="d43b02e7-af2d-3642-93d8-370d84193655" /dev/sda7: UUID="4100d9e3-55b9-4ce2-9312-117932369684" TYPE="ext4" PARTLABEL="ROOT-A" PARTUUID="a01d12a1-c0e2-d54c-b68a-6e24e3896ae2" How I do to put this information you give me Below in e-mail before: to you would boot a kernel from an ***sdcard that had uImage and tegra124-nyan-big.dtb in ***ext2 formatted partition on ***/dev/mmcblk1p3***mmc dev 1 ; mmc rescan 1 ; ext2load mmc 1:3 0x81000000 uImage ; ext2load mmc 1:3 0x82000000 tegra124-nyan-big.dtb ; bootm 0x81000000 - 0x82000000
You can use gparted or mkfs to build an ext4 filesystem, then copy those two files onto it.
This thread is quite confusing due to strange quoting and top-posting. You might want to start again...
Because I using the sugestion 1 I did describe in e-mail below with Uboot and Kernel 3.10.x.x run like a charm.*** Information to adapt for USB botting
How I do to Kernel 4.4.x.xBest Regards
Perfeito , Alexander
De: Thomas Hoff thomashoffltd@gmail.com Enviado: segunda-feira, 24 de julho de 2017 17:53 Para: Simon Glass Cc: Alexandre N. Perfeito; u-boot@lists.denx.de Assunto: Re: [U-Boot] Uboot compatible with board Tegra124-nyan-big (ChromeBook G3 HP 14")
Hey Alexandre,
Here is a link to a precompiled and signed non verified uboot for the nyan-big chromebook: https://drive.google.com/file/d/0B3uMpbwOyYIadEtPdVpHV1piWEU/view?usp=sharin...
This is how you would boot a kernel from an sdcard that had uImage and tegra124-nyan-big.dtb in ext2 formatted partition on /dev/mmcblk1p3 mmc dev 1 ; mmc rescan 1 ; ext2load mmc 1:3 0x81000000 uImage ; ext2load mmc 1:3 0x82000000 tegra124-nyan-big.dtb ; bootm 0x81000000 - 0x82000000
Hope that helps
On Fri, Jul 21, 2017 at 3:48 AM, Simon Glass <sjg@chromium.orgmailto:sjg@chromium.org> wrote: Hi Alexandre,
[...]
Hi , My Name is Alexander and i need some tip information about U-bootBoard Nyan-Big to runinng Linux v4.4.x.x.
Can you please resend this to the U-Boot mailing list and cc me?
Thanks, Simon
I compiled source 4.4.0.70 Ubuntu distribution in chroot environment in my chormebook Tegra Tk1. After compilation the generated files were the following:
[aperfeito@alarm boot]$ ls -l total 24992 -rw-r--r-- 1 root root 98874 Jul 13 14:54 config-4.4.70-ARCH -rw-r--r-- 1 root root 8277506 Jul 13 14:54 initrd.img-4.4.70-ARCH -rw-r--r-- 1 root root 2033244 Jul 13 14:54 System.map-4.4.70-ARCH -rw-r--r-- 1 root root 15175680 Jul 13 14:54 vmlinuz-4.4.70-ARCH
I also compiled the u-boot-tegra in the same environment in chroot Ubuntu Xenial distribution these were compiled according to the email of Tom Warren send before
Make 'nyan-big_defconfig' and everything ok as you see below the generated files:
[aperfeito@alarm u-boot-tegra]$ ls *.bin u-boot.bin u-boot-dtb-tegra.bin u-boot-nodtb-tegra.bin u-boot-dtb.bin u-boot-nodtb.bin u-boot-tegra.bin
Now is the tip I'm asking you: I have two suggestions on how to put this in the KERNEL partition of my USB. My USB has two partitions To 1st. KERNEL Name with 16 megabytes of space dev / sda6 A 2st. ROOFS Name approximately 29 Gigabytes of space where I worked to compile the UbuntuXenial and Uboot-Tegra srcs kernel as you see in the email.
Sugestion : 1 mkimage -D "-I dts -O dtb -p 2048" -f kernel.its vmlinux.uimg dd if=/dev/zero of=bootloader.bin bs=512 count=1 vbutil_kernel \ --pack vmlinux.kpart \ --version 1 \ --vmlinuz vmlinux.uimg \ --arch arm \ --keyblock kernel.keyblock \ --> How I do This if necessary --signprivate kernel_data_key.vbprivk \ --> How I do This if necessary --config cmdline \ --> TXT file whit this config below --bootloader bootloader.bin
kernel.its adjust to files below as given to te src kernel 4.4.0-70 ./arch/arm/boot/dts/tegra124-nyan-blaze.dtb ./arch/arm/boot/dts/tegra124-nyan-big.dtb ___________________________________________________TXT CONFIG FILE __________________________________________________ console=tty1 init=/sbin/init root=PARTUUID=%U/PARTNROFF=1 rootwait rw noinitrd lsm.module_locking=0 ## OR ### initrd=/boot/initrd.img-4.4.0-ARCH console=ttyS0,115200n8 console=tty1 ignore_loglevel earlyprintk cgroup_enable=memory root=/dev/sda7
### For config line need your sugestion with is the best.Sugestion: 2
I have to copy the kernel, generated initramfs, and dtb to the SDA6 partition and added the following kernel config to /dev/sda7/roofsparttion :/boot/extlinux/extlinux.conf
LABEL UbuntuXenial MENU LABEL UbuntuXenial on sda7 with 4.4 kernel LINUX /boot/vmlinuz-4.4.0 FDT /boot/dtb/tegra124-nyan-big.dtb APPEND initrd=/boot/initrd.img-4.4.0-ARCH console=ttyS0,115200n8 console=tty1 ignore_loglevel earlyprintk cgroup_enable=memory root=/dev/sda7
How to make U-boot-Tegra now Work with Kernel 4.4.x.x as v3.10.x.x Kernels booting on USB.
There is a series which shows how to do this for tegra and rockchip. It is at u-boot-dm/chain-working and you can find a README there as well.
The series has not been applied yet - I think it is in Tom Warren's queue?
Regards, Simon [...] _______________________________________________ U-Boot mailing list U-Boot@lists.denx.demailto:U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
Regards, Simon
participants (2)
-
Alexandre N. Perfeito -
Simon Glass