[U-Boot-Users] VxWorks and Windows
Hi,
Has anybody any tips to share about using u-boot with VxWorks?
Does anybody know if there is a freeware Linux emulation program that can be used to run GNU tools under Windows?
Thank you for your time,
Shlomo Kut
Software Engineer MKS Instruments Tenta Products Tel: 972-8-9181015 Fax: 972-8-9181020 www.mksinst.com
Hi,
You can use cygwin to run GNU tools under windows.
Regards Ganapathi C
----- Original Message ----- From: Shlomo_Kut@mksinst.com To: u-boot-users@lists.sourceforge.net Sent: Thursday, April 01, 2004 1:51 PM Subject: [U-Boot-Users] VxWorks and Windows
Hi,
Has anybody any tips to share about using u-boot with VxWorks?
Does anybody know if there is a freeware Linux emulation program that can be used to run GNU tools under Windows?
Thank you for your time,
Shlomo Kut
Software Engineer MKS Instruments Tenta Products Tel: 972-8-9181015 Fax: 972-8-9181020 www.mksinst.com
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
In message OF26590990.C72E7950-ON42256E69.002DAC21-08256E69.002DE0EF@mksinst.com you wrote:
Has anybody any tips to share about using u-boot with VxWorks?
Just use U-boot to load and start VxWorks.
Does anybody know if there is a freeware Linux emulation program that can be used to run GNU tools under Windows?
Many people will point you to Cygwin; but you will soon learn a lesson (see signature below).
Best regards,
Wolfgang Denk
Why would you use Cygwin when Linux is free. That's like driving a Volkswagen with Ferrari skins when you can afford to buy the real thing.:-)
--- Wolfgang Denk wd@denx.de wrote:
In message
OF26590990.C72E7950-ON42256E69.002DAC21-08256E69.002DE0EF@mksinst.com
you wrote:
Has anybody any tips to share about using u-boot with
VxWorks?
Just use U-boot to load and start VxWorks.
Does anybody know if there is a freeware Linux emulation
program that can
be used to run GNU tools under Windows?
Many people will point you to Cygwin; but you will soon learn a lesson (see signature below).
Best regards,
Wolfgang Denk
-- The use of Microsoft crippleware systems is a sin that carries with it its own punishment. -- Tom Christiansen in 6bo3fr$pj8$5@csnews.cs.colorado.edu
This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users
__________________________________ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/
Hi,
Does anybody know if there is a freeware Linux emulation program that can be used to run GNU tools under Windows?
Do you need to run GNU tools under Windows because Vxworks doesn't support Linux as its development environment and you have to also compile u-boot?
If so, use Linux as a VxWorks development environment. There is an open source project to do it (which I made). Visit http://vxtools.sourceforge.net/
Regards, Sangmoon Kim
participants (5)
-
Frank -
ganapathi -
Sangmoon Kim -
Shlomo_Kut＠mksinst.com -
Wolfgang Denk