[PATCH 1/2] ARM: stm32: Disable EFI on DHSOM
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 8fe0456a56d..ae9c3cdc25f 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -62,6 +62,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y # CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_LIST="stm32mp15xx-dhcom-pdk2 stm32mp15xx-dhcom-drc02 stm32mp15xx-dhcom-picoitx" CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y @@ -157,5 +159,7 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 21f5c9e01b2..98ba37c750e 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -60,6 +60,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y # CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y @@ -151,5 +153,7 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com --- configs/stm32mp15_dhcom_basic_defconfig | 14 +------------- configs/stm32mp15_dhcor_basic_defconfig | 14 +------------- 2 files changed, 2 insertions(+), 26 deletions(-)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index ae9c3cdc25f..5ecc91c7c1b 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its" # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y @@ -53,7 +54,6 @@ CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -147,18 +147,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_DM_VIDEO=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y -CONFIG_VIDEO_STM32=y -CONFIG_VIDEO_STM32_DSI=y -CONFIG_VIDEO_STM32_MAX_XRES=1280 -CONFIG_VIDEO_STM32_MAX_YRES=800 -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_BMP_24BPP=y -CONFIG_BMP_32BPP=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 98ba37c750e..7c410b8224a 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its" # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y @@ -51,7 +52,6 @@ CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -141,18 +141,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_DM_VIDEO=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y -CONFIG_VIDEO_STM32=y -CONFIG_VIDEO_STM32_DSI=y -CONFIG_VIDEO_STM32_MAX_XRES=1280 -CONFIG_VIDEO_STM32_MAX_YRES=800 -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_BMP_24BPP=y -CONFIG_BMP_32BPP=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y
Hi Marek
On 10/23/21 8:33 PM, Marek Vasut wrote:
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 14 +------------- configs/stm32mp15_dhcor_basic_defconfig | 14 +------------- 2 files changed, 2 insertions(+), 26 deletions(-)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index ae9c3cdc25f..5ecc91c7c1b 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -22,6 +22,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its" # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y @@ -53,7 +54,6 @@ CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -147,18 +147,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_DM_VIDEO=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y -CONFIG_VIDEO_STM32=y -CONFIG_VIDEO_STM32_DSI=y -CONFIG_VIDEO_STM32_MAX_XRES=1280 -CONFIG_VIDEO_STM32_MAX_YRES=800 -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_BMP_24BPP=y -CONFIG_BMP_32BPP=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 98ba37c750e..7c410b8224a 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -20,6 +20,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its" # CONFIG_USE_SPL_FIT_GENERATOR is not set CONFIG_BOOTDELAY=1 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_CONSOLE_MUX=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y @@ -51,7 +52,6 @@ CONFIG_CMD_REMOTEPROC=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y -CONFIG_CMD_BMP=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_TIMER=y @@ -141,18 +141,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_DM_VIDEO=y -CONFIG_BACKLIGHT_GPIO=y -CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y -CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y -CONFIG_VIDEO_STM32=y -CONFIG_VIDEO_STM32_DSI=y -CONFIG_VIDEO_STM32_MAX_XRES=1280 -CONFIG_VIDEO_STM32_MAX_YRES=800 -CONFIG_VIDEO_BMP_RLE8=y -CONFIG_BMP_16BPP=y -CONFIG_BMP_24BPP=y -CONFIG_BMP_32BPP=y CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice
Hi,
On 10/23/21 8:33 PM, Marek Vasut wrote:
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 14 +------------- configs/stm32mp15_dhcor_basic_defconfig | 14 +------------- 2 files changed, 2 insertions(+), 26 deletions(-)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Hi Marek
On 10/25/21 10:30 AM, Patrick DELAUNAY wrote:
Hi,
On 10/23/21 8:33 PM, Marek Vasut wrote:
The video output support is unused and disabling it saves about 20 kiB of space. In case video output support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 14 +------------- configs/stm32mp15_dhcor_basic_defconfig | 14 +------------- 2 files changed, 2 insertions(+), 26 deletions(-)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied on u-boot-stm/master Thanks
Hi Marek
On 10/23/21 8:33 PM, Marek Vasut wrote:
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 8fe0456a56d..ae9c3cdc25f 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -62,6 +62,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y # CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_LIST="stm32mp15xx-dhcom-pdk2 stm32mp15xx-dhcom-drc02 stm32mp15xx-dhcom-picoitx" CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y @@ -157,5 +159,7 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 21f5c9e01b2..98ba37c750e 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -60,6 +60,8 @@ CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y # CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_ISO_PARTITION is not set +# CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y @@ -151,5 +153,7 @@ CONFIG_VIDEO_BMP_RLE8=y CONFIG_BMP_16BPP=y CONFIG_BMP_24BPP=y CONFIG_BMP_32BPP=y +CONFIG_FAT_WRITE=y CONFIG_LZO=y CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_EFI_LOADER is not set
Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com
Thanks Patrice
Hi,
On 10/23/21 8:33 PM, Marek Vasut wrote:
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Hi Marek
On 10/25/21 10:29 AM, Patrick DELAUNAY wrote:
Hi,
On 10/23/21 8:33 PM, Marek Vasut wrote:
The EFI support is unused and disabling it saves about 70 kiB of space. In case EFI support is required, it can be re-enabled.
Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@foss.st.com Cc: Patrick Delaunay patrick.delaunay@foss.st.com
configs/stm32mp15_dhcom_basic_defconfig | 4 ++++ configs/stm32mp15_dhcor_basic_defconfig | 4 ++++ 2 files changed, 8 insertions(+)
Reviewed-by: Patrick Delaunay patrick.delaunay@foss.st.com
Thanks Patrick
Applied on u-boot-stm/master Thanks
participants (3)
-
Marek Vasut -
Patrice CHOTARD -
Patrick DELAUNAY