[U-Boot] [PATCH] README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to Kconfig
From: Fabio Estevam fabio.estevam@nxp.com
Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update the mxc_hab README file to reflect that.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com --- doc/README.mxc_hab | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab index b688580..c1f8ded 100644 --- a/doc/README.mxc_hab +++ b/doc/README.mxc_hab @@ -2,10 +2,9 @@ High Assurance Boot (HAB) for i.MX6 CPUs
To enable the authenticated or encrypted boot mode of U-Boot, it is required to set the proper configuration for the target board. This -is done by adding the following configuration in in the proper config -file (e.g. include/configs/mx6qarm2.h) +is done by adding the following configuration in the defconfig file:
-#define CONFIG_SECURE_BOOT +CONFIG_SECURE_BOOT=y
In addition, the U-Boot image to be programmed into the boot media needs to be properly constructed, i.e. it must contain a
Hi Fabio
On Thu, Jan 05, 2017 at 09:33:08PM -0200, Fabio Estevam wrote:
From: Fabio Estevam fabio.estevam@nxp.com
Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update the mxc_hab README file to reflect that.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
Good catch, completely forgot about the README.
Reviewed-by: Gary Bisson gary.bisson@boundarydevices.com
Thanks, Gary
On 06/01/2017 00:33, Fabio Estevam wrote:
From: Fabio Estevam fabio.estevam@nxp.com
Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update the mxc_hab README file to reflect that.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
doc/README.mxc_hab | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab index b688580..c1f8ded 100644 --- a/doc/README.mxc_hab +++ b/doc/README.mxc_hab @@ -2,10 +2,9 @@ High Assurance Boot (HAB) for i.MX6 CPUs
To enable the authenticated or encrypted boot mode of U-Boot, it is required to set the proper configuration for the target board. This -is done by adding the following configuration in in the proper config -file (e.g. include/configs/mx6qarm2.h) +is done by adding the following configuration in the defconfig file:
-#define CONFIG_SECURE_BOOT +CONFIG_SECURE_BOOT=y
In addition, the U-Boot image to be programmed into the boot media needs to be properly constructed, i.e. it must contain a
Applied to u-boot-imx, thanks !
Best regards, Stefano Babic
participants (3)
-
Fabio Estevam -
Gary Bisson -
Stefano Babic