The clock driver for the RK3399 mistakenly used (24 * 2^20) where it should have used (24 * 10^6) in a few calculations.

This commits fixes this.

Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---

drivers/clk/rockchip/clk_rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index 1ac4ff4..ff3cc37 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -667,7 +667,7 @@ static ulong rk3399_mmc_get_clk(struct rk3399_cru *cru, uint clk_id)

if ((con & CLK_EMMC_PLL_MASK) >> CLK_EMMC_PLL_SHIFT == CLK_EMMC_PLL_SEL_24M) - return DIV_TO_RATE(24*1024*1024, div); + return DIV_TO_RATE(24*1000*1000, div); else return DIV_TO_RATE(GPLL_HZ, div); } @@ -685,7 +685,7 @@ static ulong rk3399_mmc_set_clk(struct rk3399_cru *cru,

if (src_clk_div > 127) { /* use 24MHz source for 400KHz clock */ - src_clk_div = 24*1024*1024 / set_rate; + src_clk_div = 24*1000*1000 / set_rate; rk_clrsetreg(&cru->clksel_con[16], CLK_EMMC_PLL_MASK | CLK_EMMC_DIV_CON_MASK, CLK_EMMC_PLL_SEL_24M << CLK_EMMC_PLL_SHIFT |