Hi Pratyush

In the [v10,14/27] @@ -2767,7 +2858,10 @@ int spi_nor_scan(struct spi_nor *nor) if (ret) return ret;

- if (nor->addr_width) { + if (spi_nor_protocol_is_dtr(nor->read_proto)) { + /* Always use 4-byte addresses in DTR mode. */ + nor->addr_width = 4; + } else if (nor->addr_width) { /* already configured from SFDP */ } else if (info->addr_width) { nor->addr_width = info->addr_width;

In the [v10,8/27]

@@ -2603,7 +2603,11 @@ int spi_nor_scan(struct spi_nor *nor) /* already configured from SFDP */ } else if (info->addr_width) { nor->addr_width = info->addr_width; - } else if (mtd->size > SZ_16M) { + } else { + nor->addr_width = 3; + } + + if (nor->addr_width == 3 && mtd->size > SZ_16M) { #ifndef CONFIG_SPI_FLASH_BAR /* enable 4-byte addressing if the device exceeds 16MiB */ nor->addr_width = 4;

For this part, nor->addr_width will be set to 4 if spi-nor protocol is DTR mode. Judgement "if (nor->addr_width == 3 && mtd->size > SZ_16M)" will not be triggered and spi_nor_set_4byte_opcodes will not execute. So that driver still using 3-bytes opcode in DTR mode. I think it is not convenient for every flash vendors to add xxx_post_sfdp_fixup() for setting pp and erase opcode in different protocol. Would you consider to follow the linux method?

Thanks Jaime

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================

============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================