Support tinker-s board. The board is equivalent of tinker board except of emmc.

TODO: - support of usb current burst when the board is powered from pc

Signed-off-by: Michael Trimarchi michael@amarulasolutions.com --- arch/arm/dts/Makefile | 1 + arch/arm/dts/rk3288-tinker-s-u-boot.dtsi | 34 ++++++++ arch/arm/dts/rk3288-tinker-s.dts | 40 ++++++++++ configs/tinker-s-rk3288_defconfig | 99 ++++++++++++++++++++++++ 4 files changed, 174 insertions(+) create mode 100644 arch/arm/dts/rk3288-tinker-s-u-boot.dtsi create mode 100644 arch/arm/dts/rk3288-tinker-s.dts create mode 100644 configs/tinker-s-rk3288_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 89ab8001ce..7e9d6809ea 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -87,6 +87,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3288) += \ rk3288-popmetal.dtb \ rk3288-rock2-square.dtb \ rk3288-tinker.dtb \ + rk3288-tinker-s.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ rk3288-veyron-minnie.dtb \ diff --git a/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi new file mode 100644 index 0000000000..a177fca73a --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Amarula Solutions SRO + */ + +#include "rk3288-u-boot.dtsi" +#include "rk3288-tinker-u-boot.dtsi" + +/ { + chosen { + u-boot,spl-boot-order = \ + "same-as-spl", &sdmmc, &emmc; + }; +}; + +&emmc { + u-boot,dm-spl; +}; + +&emmc_clk { + u-boot,dm-spl; +}; + +&emmc_cmd { + u-boot,dm-spl; +}; + +&emmc_pwr { + u-boot,dm-spl; +}; + +&emmc_bus8 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/rk3288-tinker-s.dts b/arch/arm/dts/rk3288-tinker-s.dts new file mode 100644 index 0000000000..5884e280d2 --- /dev/null +++ b/arch/arm/dts/rk3288-tinker-s.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rk3288-tinker.dtsi" + +/ { + model = "Rockchip RK3288 Asus Tinker Board S"; + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; + + chosen { + stdout-path = &uart2; + }; +}; + +&dmc { + rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d + 0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 + 0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 + 0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 + 0x8 0x1f4>; + rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 + 0x0 0xc3 0x6 0x2>; + rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + max-frequency = <150000000>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig new file mode 100644 index 0000000000..c851a93f31 --- /dev/null +++ b/configs/tinker-s-rk3288_defconfig @@ -0,0 +1,99 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_ROCKCHIP_RK3288=y +CONFIG_TARGET_TINKER_RK3288=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_SPL_SIZE_LIMIT=307200 +CONFIG_SPL_STACK_R_ADDR=0x800000 +CONFIG_DEBUG_UART_BASE=0xff690000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_DEBUG_UART=y +CONFIG_TPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_USE_PREBOOT=y +CONFIG_SILENT_CONSOLE=y +CONFIG_CONSOLE_MUX=y +CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x300000 +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIME=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_SPL_PARTITION_UUIDS=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_REGMAP=y +CONFIG_SPL_REGMAP=y +CONFIG_SYSCON=y +CONFIG_SPL_SYSCON=y +# CONFIG_SPL_SIMPLE_BUS is not set +CONFIG_CLK=y +CONFIG_SPL_CLK=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=20000000 +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_RK8XX=y +CONFIG_SPL_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_SPL_DM_REGULATOR_FIXED=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_RAM=y +CONFIG_SPL_RAM=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_DWC2=y +CONFIG_ROCKCHIP_USB2_PHY=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Rockchip" +CONFIG_USB_GADGET_VENDOR_NUM=0x2207 +CONFIG_USB_GADGET_PRODUCT_NUM=0x320a +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_CMD_DHRYSTONE=y +CONFIG_ERRNO_STR=y +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_VIDEO_ROCKCHIP=y +CONFIG_DISPLAY_ROCKCHIP_HDMI=y +CONFIG_CONSOLE_SCROLL_LINES=10