The U-Boot proper building needs to descend arch/arm/mach-uniphier/dram to build these commands.

Fixes: 93d92d46cd01 ("ARM: uniphier: add dump command for DDR Multi PHY registers") Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

Changes in v2: - Newly added

arch/arm/mach-uniphier/Makefile | 3 ++- arch/arm/mach-uniphier/dram/Makefile | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 491e78e..e65d602 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -6,7 +6,7 @@ ifdef CONFIG_SPL_BUILD

obj-y += lowlevel_init.o

-obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ dram/ +obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/

obj-$(CONFIG_DEBUG_LL) += debug_ll.o @@ -32,5 +32,6 @@ obj-y += timer.o obj-y += boards.o obj-y += soc_info.o obj-y += boot-mode/ +obj-y += dram/

obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o diff --git a/arch/arm/mach-uniphier/dram/Makefile b/arch/arm/mach-uniphier/dram/Makefile index cab7df1..a0a6003 100644 --- a/arch/arm/mach-uniphier/dram/Makefile +++ b/arch/arm/mach-uniphier/dram/Makefile @@ -2,6 +2,8 @@ # SPDX-License-Identifier: GPL-2.0+ #

+ifdef CONFIG_SPL_BUILD + obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o \ ddrphy-training.o ddrphy-ph1-ld4.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o \ @@ -11,5 +13,9 @@ obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o \ obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += umc-proxstream2.o obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += umc-proxstream2.o

+else + obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o obj-$(CONFIG_CMD_DDRMPHY_DUMP) += cmd_ddrmphy.o + +endif