[U-Boot] please pull u-boot-samsung master
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
---------------------------------------------------------------- Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device. MMC: DWMMC: Fix FIFO_DEPTH calculation
arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/clock.c | 10 +- .../arm/cpu/armv7/exynos/tzpc.c | 25 +- arch/arm/cpu/armv7/s5p-common/Makefile | 2 + arch/arm/dts/exynos5250.dtsi | 33 ++ arch/arm/include/asm/arch-exynos/cpu.h | 4 + arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +- arch/arm/include/asm/arch-exynos/tmu.h | 58 ++- arch/arm/include/asm/arch-exynos/tzpc.h | 20 + board/samsung/dts/exynos5250-smdk5250.dts | 24 ++ board/samsung/origen/lowlevel_init.S | 44 +- board/samsung/origen/origen_setup.h | 25 -- board/samsung/smdk5250/Makefile | 5 +- board/samsung/smdk5250/clock_init.c | 18 + board/samsung/smdk5250/clock_init.h | 5 + board/samsung/smdk5250/exynos5-dt.c | 423 ++++++++++++++++++++ board/samsung/smdk5250/lowlevel_init.S | 2 + board/samsung/smdk5250/setup.h | 25 -- board/samsung/smdk5250/smdk5250.c | 223 +++-------- board/samsung/smdk5250/spl_boot.c | 64 ++- board/samsung/smdkv310/lowlevel_init.S | 60 +-- common/cmd_mmc.c | 109 ++++- doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++ drivers/mmc/dw_mmc.c | 27 +- drivers/mmc/exynos_dw_mmc.c | 127 +++++- drivers/mmc/mmc.c | 134 +++++++ drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/gigadevice.c | 81 ++++ drivers/mtd/spi/spi_flash.c | 3 + drivers/mtd/spi/spi_flash_internal.h | 1 + drivers/power/exynos-tmu.c | 123 +++--- drivers/serial/serial_s5p.c | 13 +- drivers/video/exynos_fb.c | 4 +- include/configs/exynos5250-dt.h | 11 +- include/configs/origen.h | 2 + include/configs/smdkv310.h | 2 + include/configs/trats.h | 17 +- include/dwmmc.h | 3 + include/fdtdec.h | 1 + include/mmc.h | 26 ++ lib/fdtdec.c | 1 + spl/Makefile | 4 + 42 files changed, 1356 insertions(+), 471 deletions(-) rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%) create mode 100644 board/samsung/smdk5250/exynos5-dt.c create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644 drivers/mtd/spi/gigadevice.c
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
-- Thanks, Jagan.
MMC: DWMMC: Fix FIFO_DEPTH calculationarch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/clock.c | 10 +- .../arm/cpu/armv7/exynos/tzpc.c | 25 +- arch/arm/cpu/armv7/s5p-common/Makefile | 2 + arch/arm/dts/exynos5250.dtsi | 33 ++ arch/arm/include/asm/arch-exynos/cpu.h | 4 + arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +- arch/arm/include/asm/arch-exynos/tmu.h | 58 ++- arch/arm/include/asm/arch-exynos/tzpc.h | 20 + board/samsung/dts/exynos5250-smdk5250.dts | 24 ++ board/samsung/origen/lowlevel_init.S | 44 +- board/samsung/origen/origen_setup.h | 25 -- board/samsung/smdk5250/Makefile | 5 +- board/samsung/smdk5250/clock_init.c | 18 + board/samsung/smdk5250/clock_init.h | 5 + board/samsung/smdk5250/exynos5-dt.c | 423 ++++++++++++++++++++ board/samsung/smdk5250/lowlevel_init.S | 2 + board/samsung/smdk5250/setup.h | 25 -- board/samsung/smdk5250/smdk5250.c | 223 +++-------- board/samsung/smdk5250/spl_boot.c | 64 ++- board/samsung/smdkv310/lowlevel_init.S | 60 +-- common/cmd_mmc.c | 109 ++++- doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++ drivers/mmc/dw_mmc.c | 27 +- drivers/mmc/exynos_dw_mmc.c | 127 +++++- drivers/mmc/mmc.c | 134 +++++++ drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/gigadevice.c | 81 ++++ drivers/mtd/spi/spi_flash.c | 3 + drivers/mtd/spi/spi_flash_internal.h | 1 + drivers/power/exynos-tmu.c | 123 +++--- drivers/serial/serial_s5p.c | 13 +- drivers/video/exynos_fb.c | 4 +- include/configs/exynos5250-dt.h | 11 +- include/configs/origen.h | 2 + include/configs/smdkv310.h | 2 + include/configs/trats.h | 17 +- include/dwmmc.h | 3 + include/fdtdec.h | 1 + include/mmc.h | 26 ++ lib/fdtdec.c | 1 + spl/Makefile | 4 + 42 files changed, 1356 insertions(+), 471 deletions(-) rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%) create mode 100644 board/samsung/smdk5250/exynos5-dt.c create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644 drivers/mtd/spi/gigadevice.c -- Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Hi Minkyu,
On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
So, Minkyu, should I pick this PR or wait for an update?
Amicalement,
On 18/06/13 23:57, Albert ARIBAUD wrote:
Hi Minkyu,
On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
gigabyte flash driver is available in drivers/mtd/spi/ please refer below link. http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gig...;
So, Minkyu, should I pick this PR or wait for an update?
Please pick this PR.
Amicalement,
Thanks, Minkyu Kang.
On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang mk7.kang@samsung.com wrote:
On 18/06/13 23:57, Albert ARIBAUD wrote:
Hi Minkyu,
On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
gigabyte flash driver is available in drivers/mtd/spi/ please refer below link. http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gig...;
My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device." is enabling the driver CONFIG_* into smdk5250 configuration entries.
Is this valid, please correct me if am wrong.
-- Thanks, Jagan.
So, Minkyu, should I pick this PR or wait for an update?
Please pick this PR.
Amicalement,
Thanks, Minkyu Kang.
Hi Jagan,
On Wed, 19 Jun 2013 17:19:36 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang mk7.kang@samsung.com wrote:
On 18/06/13 23:57, Albert ARIBAUD wrote:
Hi Minkyu,
On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
gigabyte flash driver is available in drivers/mtd/spi/ please refer below link. http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gig...;
My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device." is enabling the driver CONFIG_* into smdk5250 configuration entries.
Is this valid, please correct me if am wrong.
Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which creates said device?
-- Thanks, Jagan.
Amicalement,
On Wed, Jun 19, 2013 at 5:24 PM, Albert ARIBAUD albert.u.boot@aribaud.net wrote:
Hi Jagan,
On Wed, 19 Jun 2013 17:19:36 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Wed, Jun 19, 2013 at 6:09 AM, Minkyu Kang mk7.kang@samsung.com wrote:
On 18/06/13 23:57, Albert ARIBAUD wrote:
Hi Minkyu,
On Mon, 17 Jun 2013 13:16:20 +0530, Jagan Teki jagannadh.teki@gmail.com wrote:
On Mon, Jun 17, 2013 at 7:40 AM, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device.
SPI gigabyte flash driver is not available in drivers/mtd/spi/ Am i missing anything here, please help.
gigabyte flash driver is available in drivers/mtd/spi/ please refer below link. http://git.denx.de/?p=u-boot/u-boot-samsung.git;a=blob;f=drivers/mtd/spi/gig...;
My question is the driver is not yet in main line, but patch " SMDK5250: Enable SPI Gigabyte device." is enabling the driver CONFIG_* into smdk5250 configuration entries.
Is this valid, please correct me if am wrong.
Doesn't patch "SMDK5250: Enable SPI Gigabyte device" immediately follow patch "SF: Add driver for Gigabyte device GD25LQ and GD25Q64B" which creates said device?
OK I couldn't observer actual commit prefix for this gigabyte flash driver. May it could have sf: gigabyte:
Any way please continue-
-- Thanks, Jagan.
-- Thanks, Jagan.
Amicalement,
Albert.
Hi Minkyu,
On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
I had three merge conflicts here, two solved automatically (files drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile).
I have pushed the resulting branch as mastercandidate.
Please confirm that the resolutions are ok.
Amicalement,
On 19/06/13 20:30, Albert ARIBAUD wrote:
Hi Minkyu,
On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
I had three merge conflicts here, two solved automatically (files drivers/mmc/mmc.c and include/mmc.h) and one manually (spl/Makefile).
I have pushed the resulting branch as mastercandidate.
Please confirm that the resolutions are ok.
It's good. confirmed.
Amicalement,
Thanks, Minkyu Kang.
Hi Minkyu,
On Mon, 17 Jun 2013 11:10:58 +0900, Minkyu Kang mk7.kang@samsung.com wrote:
Dear Albert,
The following changes since commit d0a51373131c4ba565a2391d5ed78b87c406ce98:
at91sam9260ek: move board id setup to config header (2013-05-12 16:49:14 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-samsung master
for you to fetch changes up to ed7bdc03eb516fb698ccc12ec5b4b9f132d05c5f:
MMC: DWMMC: Fix FIFO_DEPTH calculation (2013-06-17 11:03:42 +0900)
Akshay Saraswat (2): Exynos5: clock: Update the equation to calculate PLL output frequency Exynos: uart: s5p: enabling the uart tx/rx fifo
Amar (9): FDT: Add compatible string for DWMMC EXYNOS5: FDT: Add DWMMC device node data DWMMC: Initialise dwmci and resolve EMMC read write issues EXYNOS5: DWMMC: Added FDT support for DWMMC EXYNOS5: DWMMC: Initialise the local variable to avoid unwanted results. SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT MMC: APIs to support resize of EMMC boot partition SMDK5250: Enable EMMC booting COMMON: MMC: Command to support EMMC booting and to resize EMMC boot partition
Arkadiusz Wlodarczyk (1): arm:trats: change auto-booting to boot kernel with separate device tree blob
Inderpal Singh (3): exynos: move tzpc_init to armv7/exynos exynos: update tzpc to make it common for exynos4 and exynos5 exynos: Update origen and smdkv310 to use common tzpc_init
Naveen Krishna Chatradhi (2): power: exynos-tmu: fix warnings and clean up code power: exynos-tmu: use the mux_addr bit fields in tmu_control register
Rajeshwari Shinde (3): SF: Add driver for Gigabyte device GD25LQ and GD25Q64B SMDK5250: Enable SPI Gigabyte device. MMC: DWMMC: Fix FIFO_DEPTH calculation
arch/arm/cpu/armv7/exynos/Makefile | 2 +- arch/arm/cpu/armv7/exynos/clock.c | 10 +- .../arm/cpu/armv7/exynos/tzpc.c | 25 +- arch/arm/cpu/armv7/s5p-common/Makefile | 2 + arch/arm/dts/exynos5250.dtsi | 33 ++ arch/arm/include/asm/arch-exynos/cpu.h | 4 + arch/arm/include/asm/arch-exynos/dwmmc.h | 11 +- arch/arm/include/asm/arch-exynos/tmu.h | 58 ++- arch/arm/include/asm/arch-exynos/tzpc.h | 20 + board/samsung/dts/exynos5250-smdk5250.dts | 24 ++ board/samsung/origen/lowlevel_init.S | 44 +- board/samsung/origen/origen_setup.h | 25 -- board/samsung/smdk5250/Makefile | 5 +- board/samsung/smdk5250/clock_init.c | 18 + board/samsung/smdk5250/clock_init.h | 5 + board/samsung/smdk5250/exynos5-dt.c | 423 ++++++++++++++++++++ board/samsung/smdk5250/lowlevel_init.S | 2 + board/samsung/smdk5250/setup.h | 25 -- board/samsung/smdk5250/smdk5250.c | 223 +++-------- board/samsung/smdk5250/spl_boot.c | 64 ++- board/samsung/smdkv310/lowlevel_init.S | 60 +-- common/cmd_mmc.c | 109 ++++- doc/device-tree-bindings/exynos/dwmmc.txt | 54 +++ drivers/mmc/dw_mmc.c | 27 +- drivers/mmc/exynos_dw_mmc.c | 127 +++++- drivers/mmc/mmc.c | 134 +++++++ drivers/mtd/spi/Makefile | 1 + drivers/mtd/spi/gigadevice.c | 81 ++++ drivers/mtd/spi/spi_flash.c | 3 + drivers/mtd/spi/spi_flash_internal.h | 1 + drivers/power/exynos-tmu.c | 123 +++--- drivers/serial/serial_s5p.c | 13 +- drivers/video/exynos_fb.c | 4 +- include/configs/exynos5250-dt.h | 11 +- include/configs/origen.h | 2 + include/configs/smdkv310.h | 2 + include/configs/trats.h | 17 +- include/dwmmc.h | 3 + include/fdtdec.h | 1 + include/mmc.h | 26 ++ lib/fdtdec.c | 1 + spl/Makefile | 4 + 42 files changed, 1356 insertions(+), 471 deletions(-) rename board/samsung/smdk5250/tzpc_init.c => arch/arm/cpu/armv7/exynos/tzpc.c (69%) create mode 100644 board/samsung/smdk5250/exynos5-dt.c create mode 100644 doc/device-tree-bindings/exynos/dwmmc.txt create mode 100644 drivers/mtd/spi/gigadevice.c
Applied to u-boot-arm/master, thanks!
Amicalement,
participants (3)
-
Albert ARIBAUD -
Jagan Teki -
Minkyu Kang