Since commit c0efc3140e75 ("ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KB"), the u-boot.bin should be burned at the offset 0x20000. I missed to update README.uniphier in that commit. Now updating.

Signed-off-by: Masahiro Yamada yamada.masahiro@socionext.com ---

doc/README.uniphier | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/README.uniphier b/doc/README.uniphier index 539b1f2..f79659c 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -75,7 +75,7 @@ Burn U-Boot images to NAND Write the following to the NAND device:

- spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.bin at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00020000

or

@@ -94,7 +94,7 @@ Burn U-Boot images to eMMC Write the following to the Boot partition 1 of the eMMC device:

- spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.bin at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00020000

or

@@ -179,4 +179,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards.

-- Masahiro Yamada yamada.masahiro@socionext.com -Oct. 2016 +Jan. 2017