ok

please let me know is there anyway i can test working of USB function(device) in U-boot 1.3.1. currently U-boot is working fine in board.

how to add this USB function command in U-boot. i need to add config commands for usb to work. later how i can test working of usb in U-boot because i have never tested USB in U-boot.

Regards, Gurumurthy

On Thu, 23 Jul 2009 23:51:35 +0530 wrote

Dear "GurumurthyGowdar",

In message you wrote:

...

i have written driver for USB function(device) in code warrior for MPC8280,i am facing problem in configuration stage,when i connect it to the host PC through USB cable .device descriptor is happening host is setting the address but device confi guration is not happening properly...it hangs in USB busy handler.

I cannot help it, but I cannot see any relation to U-Boot in your posting.

You seem to be off topic here.

Best regards,

Wolfgang Denk

-- DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de "Nature is very un-American.  Nature never hurries."

• William George Jordan