[U-Boot] [PATCH 1/2] board: move ppa firmware address in board specific kconfig
ppa firmware address may vary depending upon different boards, configure ppa firmware address in board specific kconfig
Signed-off-by: Bhaskar Upadhaya Bhaskar.Upadhaya@nxp.com --- arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 5 ----- board/freescale/ls1012afrdm/Kconfig | 4 ++++ board/freescale/ls1012aqds/Kconfig | 3 +++ board/freescale/ls1012ardb/Kconfig | 8 ++++++++ board/freescale/ls1043aqds/Kconfig | 4 ++++ board/freescale/ls1043ardb/Kconfig | 4 ++++ board/freescale/ls1046aqds/Kconfig | 4 ++++ board/freescale/ls1046ardb/Kconfig | 5 +++++ board/freescale/ls1088a/Kconfig | 8 ++++++++ board/freescale/ls2080a/Kconfig | 24 ++++++++++++++++++++++++ board/freescale/ls2080aqds/Kconfig | 12 ++++++++++++ board/freescale/ls2080ardb/Kconfig | 24 ++++++++++++++++++++++++ 12 files changed, 100 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 7edc06d..a4d544b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -264,11 +264,6 @@ endchoice config SYS_LS_PPA_FW_ADDR hex "Address of PPA firmware loading from" depends on FSL_LS_PPA - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A - default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT - default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A - default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A - default 0x60400000 if SYS_LS_PPA_FW_IN_XIP default 0x400000 if SYS_LS_PPA_FW_IN_MMC default 0x400000 if SYS_LS_PPA_FW_IN_NAND
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig index 22d521b..fd33807 100644 --- a/board/freescale/ls1012afrdm/Kconfig +++ b/board/freescale/ls1012afrdm/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012afrdm"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig index c0b12ed..b702fb2 100644 --- a/board/freescale/ls1012aqds/Kconfig +++ b/board/freescale/ls1012aqds/Kconfig @@ -12,6 +12,9 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012aqds"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000
if FSL_PFE
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig index 493d477..0b873dd 100644 --- a/board/freescale/ls1012ardb/Kconfig +++ b/board/freescale/ls1012ardb/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012ardb"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy @@ -59,6 +63,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012a2g5rdb"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig index 95d2888..d44b20e 100644 --- a/board/freescale/ls1043aqds/Kconfig +++ b/board/freescale/ls1043aqds/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1043aqds"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + source "board/freescale/common/Kconfig"
endif diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig index 1bab7ca..2b21222 100644 --- a/board/freescale/ls1043ardb/Kconfig +++ b/board/freescale/ls1043ardb/Kconfig @@ -22,6 +22,10 @@ config SYS_HAS_ARMV8_SECURE_BASE If enabled, please also define the value for ARMV8_SECURE_BASE, for LS1043ARDB, it could be some address in OCRAM.
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + source "board/freescale/common/Kconfig"
endif diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig index 070827d..4f604b1 100644 --- a/board/freescale/ls1046aqds/Kconfig +++ b/board/freescale/ls1046aqds/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1046aqds"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + source "board/freescale/common/Kconfig"
endif diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig index b9f2ed7..96f34da 100644 --- a/board/freescale/ls1046ardb/Kconfig +++ b/board/freescale/ls1046ardb/Kconfig @@ -12,5 +12,10 @@ config SYS_SOC
config SYS_CONFIG_NAME default "ls1046ardb" + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40400000 + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig index 4479dd0..19fd137 100644 --- a/board/freescale/ls1088a/Kconfig +++ b/board/freescale/ls1088a/Kconfig @@ -12,6 +12,10 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088aqds"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + source "board/freescale/common/Kconfig" endif
@@ -29,5 +33,9 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1088ardb"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + source "board/freescale/common/Kconfig" endif diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig index b503351..d5a30d6 100644 --- a/board/freescale/ls2080a/Kconfig +++ b/board/freescale/ls2080a/Kconfig @@ -12,6 +12,18 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080a_emu"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x580400000 + +if QSPI_BOOT + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + +endif + source "board/freescale/common/Kconfig"
endif @@ -30,6 +42,18 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080a_simu"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x580400000 + +if QSPI_BOOT + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + +endif + source "board/freescale/common/Kconfig"
endif diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig index e2b2c8d..50acc95 100644 --- a/board/freescale/ls2080aqds/Kconfig +++ b/board/freescale/ls2080aqds/Kconfig @@ -13,6 +13,18 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080aqds"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x580400000 + +if QSPI_BOOT + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + +endif + source "board/freescale/common/Kconfig"
endif diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig index 8f64642..ac86357 100644 --- a/board/freescale/ls2080ardb/Kconfig +++ b/board/freescale/ls2080ardb/Kconfig @@ -13,6 +13,18 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080ardb"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x580400000 + +if QSPI_BOOT + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + +endif + source "board/freescale/common/Kconfig"
endif @@ -31,6 +43,18 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls2080ardb"
+config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x580400000 + +if QSPI_BOOT + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 + +endif + source "board/freescale/common/Kconfig"
endif
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART.
Signed-off-by: Bhaskar Upadhaya Bhaskar.Upadhaya@nxp.com --- arch/arm/Kconfig | 12 +++ arch/arm/cpu/armv8/Kconfig | 1 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/fsl-ls1012a-frwy.dts | 43 +++++++++++ board/freescale/ls1012afrdm/Kconfig | 35 +++++++-- board/freescale/ls1012afrdm/MAINTAINERS | 7 ++ board/freescale/ls1012afrdm/eth.c | 3 +- board/freescale/ls1012afrdm/ls1012afrdm.c | 67 ++++++++++++++++- configs/ls1012afrwy_qspi_defconfig | 49 ++++++++++++ include/configs/ls1012afrwy.h | 120 ++++++++++++++++++++++++++++++ 10 files changed, 329 insertions(+), 11 deletions(-) create mode 100644 arch/arm/dts/fsl-ls1012a-frwy.dts create mode 100644 configs/ls1012afrwy_qspi_defconfig create mode 100644 include/configs/ls1012afrwy.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9bd70f4..d5d2dc7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -973,6 +973,18 @@ config TARGET_LS1012A2G5RDB development platform that supports the QorIQ LS1012A Layerscape Architecture processor.
+config TARGET_LS1012AFRWY + bool "Support ls1012afrwy" + select ARCH_LS1012A + select ARM64 + imply SCSI + imply SCSI_AHCI + help + Support for Freescale LS1012AFRWY platform. + The LS1012A FRWY board (FRWY) is a high-performance + development platform that supports the QorIQ LS1012A + Layerscape Architecture processor. + config TARGET_LS1012AFRDM bool "Support ls1012afrdm" select ARCH_LS1012A diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 3a0e129..22d2f29 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -91,6 +91,7 @@ config PSCI_RESET !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \ !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ + !TARGET_LS1012AFRWY && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS2081ARDB && \ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ac7667b..8455587 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -225,7 +225,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ fsl-ls1012a-qds.dtb \ fsl-ls1012a-rdb.dtb \ fsl-ls1012a-2g5rdb.dtb \ - fsl-ls1012a-frdm.dtb + fsl-ls1012a-frdm.dtb \ + fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb diff --git a/arch/arm/dts/fsl-ls1012a-frwy.dts b/arch/arm/dts/fsl-ls1012a-frwy.dts new file mode 100644 index 0000000..3158246 --- /dev/null +++ b/arch/arm/dts/fsl-ls1012a-frwy.dts @@ -0,0 +1,43 @@ +/* + * NXP ls1012a FRWY board device tree source + * + * Copyright 2018 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include "fsl-ls1012a.dtsi" + +/ { + model = "FRWY-LS1012A Board"; + + aliases { + spi0 = &qspi; + }; + + chosen { + stdout-path = &duart0; + }; +}; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: w25q16dw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig index fd33807..73ad2fe 100644 --- a/board/freescale/ls1012afrdm/Kconfig +++ b/board/freescale/ls1012afrdm/Kconfig @@ -12,20 +12,23 @@ config SYS_SOC config SYS_CONFIG_NAME default "ls1012afrdm"
+config SYS_LS_PFE_FW_ADDR + hex "Flash address of PFE firmware" + default 0x40a00000 + config SYS_LS_PPA_FW_ADDR hex "PPA Firmware Addr" default 0x40400000
+endif + if FSL_PFE
config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select PHYLIB imply PHY_REALTEK - -config SYS_LS_PFE_FW_ADDR - hex "Flash address of PFE firmware" - default 0x40a00000 + imply PHY_ATHEROS
config DDR_PFE_PHYS_BASEADDR hex "PFE DDR physical base address" @@ -45,6 +48,28 @@ config PFE_EMAC2_PHY_ADDR
endif
-source "board/freescale/common/Kconfig" +if TARGET_LS1012AFRWY + +config SYS_BOARD + default "ls1012afrdm" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1012afrwy" + +config SYS_LS_PFE_FW_ADDR + hex "Flash address of PFE firmware" + default 0x40020000 + +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x40060000
endif + +source "board/freescale/common/Kconfig" diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS index 842f86f..36e3e5a 100644 --- a/board/freescale/ls1012afrdm/MAINTAINERS +++ b/board/freescale/ls1012afrdm/MAINTAINERS @@ -4,3 +4,10 @@ S: Maintained F: board/freescale/ls1012afrdm/ F: include/configs/ls1012afrdm.h F: configs/ls1012afrdm_qspi_defconfig + +LS1012AFRWY BOARD +M: Bhaskar Upadhaya bhaskar.upadhaya@nxp.com +S: Maintained +F: board/freescale/ls1012afrwy/ +F: include/configs/ls1012afrwy.h +F: configs/ls1012afrwy_qspi_defconfig diff --git a/board/freescale/ls1012afrdm/eth.c b/board/freescale/ls1012afrdm/eth.c index cc6deb2..de3339b 100644 --- a/board/freescale/ls1012afrdm/eth.c +++ b/board/freescale/ls1012afrdm/eth.c @@ -1,6 +1,5 @@ /* - * Copyright 2015-2016 Freescale Semiconductor, Inc. - * Copyright 2017 NXP + * Copyright 2017-2018 NXP * * SPDX-License-Identifier: GPL-2.0+ */ diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c index 0145886..140d0c2 100644 --- a/board/freescale/ls1012afrdm/ls1012afrdm.c +++ b/board/freescale/ls1012afrdm/ls1012afrdm.c @@ -1,5 +1,5 @@ /* - * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP * * SPDX-License-Identifier: GPL-2.0+ */ @@ -14,6 +14,7 @@ #endif #include <asm/arch/mmu.h> #include <asm/arch/soc.h> +#include <fsl_esdhc.h> #include <hwconfig.h> #include <environment.h> #include <fsl_mmdc.h> @@ -21,16 +22,65 @@
DECLARE_GLOBAL_DATA_PTR;
+static inline int get_board_version(void) +{ + struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR); + int val; + + val = in_be32(&pgpio->gpdat); + + return val; +} + int checkboard(void) { +#ifdef CONFIG_TARGET_LS1012AFRDM puts("Board: LS1012AFRDM "); +#else + int rev; + + rev = get_board_version(); + + puts("Board: FRWY-LS1012A "); + + puts("Version"); + + switch (rev) { + case BOARD_REV_A: + puts(": RevA "); + break; + case BOARD_REV_B: + puts(": RevB "); + break; + default: + puts(": unknown"); + break; + } +#endif + return 0; +}
+#ifdef CONFIG_TARGET_LS1012AFRWY +int esdhc_status_fixup(void *blob, const char *compat) +{ + char esdhc0_path[] = "/soc/esdhc@1560000"; + char esdhc1_path[] = "/soc/esdhc@1580000"; + + do_fixup_by_path(blob, esdhc0_path, "status", "okay", + sizeof("okay"), 1); + + do_fixup_by_path(blob, esdhc1_path, "status", "disabled", + sizeof("disabled"), 1); return 0; } +#endif
int dram_init(void) { - static const struct fsl_mmdc_info mparam = { +#ifdef CONFIG_TARGET_LS1012AFRWY + int board_rev; +#endif + struct fsl_mmdc_info mparam = { 0x04180000, /* mdctl */ 0x00030035, /* mdpdc */ 0x12554000, /* mdotc */ @@ -46,9 +96,20 @@ int dram_init(void) 0xa1390003, /* mpzqhwctrl */ };
- mmdc_init(&mparam); +#ifdef CONFIG_TARGET_LS1012AFRWY + board_rev = get_board_version();
+ if (board_rev & BOARD_REV_B) { + mparam.mdctl = 0x05180000; + gd->ram_size = SYS_SDRAM_SIZE_1024; + } else { + gd->ram_size = SYS_SDRAM_SIZE_512; + } +#else gd->ram_size = CONFIG_SYS_SDRAM_SIZE; +#endif + + mmdc_init(&mparam); #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) /* This will break-before-make MMU for DDR */ update_early_mmu_table(); diff --git a/configs/ls1012afrwy_qspi_defconfig b/configs/ls1012afrwy_qspi_defconfig new file mode 100644 index 0000000..47910b4 --- /dev/null +++ b/configs/ls1012afrwy_qspi_defconfig @@ -0,0 +1,49 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1012AFRWY=y +CONFIG_SYS_TEXT_BASE=0x40100000 +CONFIG_FSL_LS_PPA=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy" +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT" +CONFIG_QSPI_BOOT=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000" +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +# CONFIG_BLK is not set +CONFIG_DM_MMC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_FSL_PFE=y +CONFIG_DM_ETH=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SYS_NS16550=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_STORAGE=y diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h new file mode 100644 index 0000000..67da6c5 --- /dev/null +++ b/include/configs/ls1012afrwy.h @@ -0,0 +1,120 @@ +/* + * Copyright 2018 NXP + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __LS1012AFRWY_H__ +#define __LS1012AFRWY_H__ + +#include "ls1012a_common.h" + +/* Board Rev*/ +#define BOARD_REV_A 0x0 +#define BOARD_REV_B 0x200 + +/* DDR */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_NR_DRAM_BANKS 2 +#define SYS_SDRAM_SIZE_512 0x20000000 +#define SYS_SDRAM_SIZE_1024 0x40000000 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#ifndef CONFIG_SPL_BUILD +#undef BOOT_TARGET_DEVICES +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) +#endif + +#undef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET 0x1D0000 +#undef FSL_QSPI_FLASH_SIZE +#define FSL_QSPI_FLASH_SIZE SZ_16M +#undef CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SECT_SIZE 0x10000 /*64 KB*/ +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SIZE 0x10000 /*64 KB*/ + +/* MMC */ +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 +#endif + +#define CONFIG_PCIE1 /* PCIE controller 1 */ + +#define CONFIG_PCI_SCAN_SHOW + +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "verify=no\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "kernelheader_addr=0x1fc000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "load_addr=0x96000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "console=ttyS0,115200\0" \ + BOOTENV \ + "boot_scripts=ls1012afrwy_boot.scr\0" \ + "boot_script_hdr=hdr_ls1012afrwy_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "installer=load mmc 0:2 $load_addr " \ + "/flex_installer_arm64.itb; " \ + "bootm $load_addr#$board\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" + +#undef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run qspi_bootcmd; "\ + "env exists secureboot && esbc_halt;" +#define CONFIG_CMD_MEMINFO +#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#include <asm/fsl_secure_boot.h> + +#endif /* __LS1012AFRWY_H__ */
Dear Bhaskar,
-----Original Message----- From: U-Boot [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Bhaskar Upadhaya Sent: Thursday, May 3, 2018 3:58 PM To: u-boot@lists.denx.de Cc: Bhaskar Upadhaya bhaskar.upadhaya@nxp.com Subject: [U-Boot] [PATCH 1/2] board: move ppa firmware address in board specific kconfig
ppa firmware address may vary depending upon different boards, configure ppa firmware address in board specific kconfig
Signed-off-by: Bhaskar Upadhaya Bhaskar.Upadhaya@nxp.com
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 5 ----- board/freescale/ls1012afrdm/Kconfig | 4 ++++ board/freescale/ls1012aqds/Kconfig | 3 +++ board/freescale/ls1012ardb/Kconfig | 8 ++++++++ board/freescale/ls1043aqds/Kconfig | 4 ++++ board/freescale/ls1043ardb/Kconfig | 4 ++++ board/freescale/ls1046aqds/Kconfig | 4 ++++ board/freescale/ls1046ardb/Kconfig | 5 +++++ board/freescale/ls1088a/Kconfig | 8 ++++++++ board/freescale/ls2080a/Kconfig | 24 ++++++++++++++++++++++++ board/freescale/ls2080aqds/Kconfig | 12 ++++++++++++ board/freescale/ls2080ardb/Kconfig | 24 ++++++++++++++++++++++++ 12 files changed, 100 insertions(+), 5 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 7edc06d..a4d544b 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -264,11 +264,6 @@ endchoice config SYS_LS_PPA_FW_ADDR hex "Address of PPA firmware loading from" depends on FSL_LS_PPA
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT &&
ARCH_LS2080A
- default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
- default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
- default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
- default 0x60400000 if SYS_LS_PPA_FW_IN_XIP default 0x400000 if SYS_LS_PPA_FW_IN_MMC default 0x400000 if SYS_LS_PPA_FW_IN_NAND
SYS_LS_PPA_FW_IN_MMC and SYS_LS_PPA_FW_IN_NAND should also be moved to board file.
--pk
participants (2)
-
Bhaskar Upadhaya -
Prabhakar Kushwaha