The commit breaks serial console on the Intel Edison.

This reverts commit 720f9e1fdb0c92d3fd16e1bfc25bcbd35612675c.

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com --- drivers/serial/ns16550.c | 40 ++++++++++++---------------------------- 1 file changed, 12 insertions(+), 28 deletions(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 3088ab47ae..386b5e04c8 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -480,40 +480,12 @@ static int ns16550_serial_getinfo(struct udevice *dev, return 0; }

-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) -static int ns1655_serial_set_base_addr(struct udevice *dev) -{ - fdt_addr_t addr; - struct ns16550_platdata *plat; - - plat = dev_get_platdata(dev); - - addr = dev_read_addr_pci(dev); - if (addr == FDT_ADDR_T_NONE) - return -EINVAL; - -#ifdef CONFIG_SYS_NS16550_PORT_MAPPED - plat->base = addr; -#else - plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); -#endif - - return 0; -} -#endif - int ns16550_serial_probe(struct udevice *dev) { struct NS16550 *const com_port = dev_get_priv(dev); struct reset_ctl_bulk reset_bulk; int ret;

-#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) - ret = ns1655_serial_set_base_addr(dev); - if (ret) - return ret; -#endif - ret = reset_get_bulk(dev, &reset_bulk); if (!ret) reset_deassert_bulk(&reset_bulk); @@ -536,9 +508,21 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev) { struct ns16550_platdata *plat = dev->platdata; const u32 port_type = dev_get_driver_data(dev); + fdt_addr_t addr; struct clk clk; int err;

+ /* try Processor Local Bus device first */ + addr = dev_read_addr_pci(dev); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED + plat->base = addr; +#else + plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); +#endif + plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);