[U-Boot] [PATCH v1 0/11] Fixes on gdsys boards and some new functionality
From: Dirk Eibach dirk.eibach@gdsys.cc
Dirk Eibach (11): board: controlcenterd: Fix pci access board: gdsys: Adapt sdhc_boot.c to mmc_get_env_addr API change board: controlcenterd: Use new API for setting i2c bus board: iocon: Support DisplayPort hardware board: gdsys: IHS I2C master driver board: gdsys: Increase iocon and dlv10g version string board: gdsys: Configure bridge on DP501 to support DDC only board: gdsys: Make gdsys osd hardware detection more robust board: gdsys: Enable scrambling on DP501 board: iocon: Modify iocon hardware startup board: gdsys: Remove commands to reduce footprint
board/gdsys/405ep/iocon.c | 14 ++- board/gdsys/common/Makefile | 4 +- board/gdsys/common/dp501.c | 35 ++++-- board/gdsys/common/ihs_i2c.c | 195 ++++++++++++++++++++++++++++++++++ board/gdsys/common/osd.c | 189 ++++++++++++++++---------------- board/gdsys/p1022/controlcenterd-id.c | 6 +- board/gdsys/p1022/controlcenterd.c | 6 +- board/gdsys/p1022/sdhc_boot.c | 2 +- include/configs/controlcenterd.h | 7 +- include/configs/dlvision-10g.h | 27 ++++- include/configs/io.h | 7 +- include/configs/iocon.h | 37 +++++-- include/configs/neo.h | 8 +- include/gdsys_fpga.h | 25 +++-- 14 files changed, 411 insertions(+), 151 deletions(-) create mode 100644 board/gdsys/common/ihs_i2c.c
From: Dirk Eibach dirk.eibach@gdsys.cc
readl was called with values instead of pointers to these values. Why this ever did work is a mystery...
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/p1022/controlcenterd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/gdsys/p1022/controlcenterd.c b/board/gdsys/p1022/controlcenterd.c index 8ccd9ce..0a3517d 100644 --- a/board/gdsys/p1022/controlcenterd.c +++ b/board/gdsys/p1022/controlcenterd.c @@ -386,9 +386,9 @@ static void hydra_initialize(void) fpga = pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
- versions = readl(fpga->versions); - fpga_version = readl(fpga->fpga_version); - fpga_features = readl(fpga->fpga_features); + versions = readl(&fpga->versions); + fpga_version = readl(&fpga->fpga_version); + fpga_features = readl(&fpga->fpga_features);
hardware_version = versions & 0xf; feature_uart_channels = (fpga_features >> 6) & 0x1f;
From: Dirk Eibach dirk.eibach@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/p1022/sdhc_boot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/gdsys/p1022/sdhc_boot.c b/board/gdsys/p1022/sdhc_boot.c index e432318..fd0e910 100644 --- a/board/gdsys/p1022/sdhc_boot.c +++ b/board/gdsys/p1022/sdhc_boot.c @@ -32,7 +32,7 @@ #define ESDHC_BOOT_IMAGE_SIZE 0x48 #define ESDHC_BOOT_IMAGE_ADDR 0x50
-int mmc_get_env_addr(struct mmc *mmc, u32 *env_addr) +int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr) { u8 *tmp_buf; u32 blklen, code_offset, code_len, n;
From: Dirk Eibach dirk.eibach@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/p1022/controlcenterd-id.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c index 3fca3c5..019df5e 100644 --- a/board/gdsys/p1022/controlcenterd-id.c +++ b/board/gdsys/p1022/controlcenterd-id.c @@ -1189,8 +1189,8 @@ int startup_ccdm_id_module(void) int result = 0; unsigned int orig_i2c_bus;
- orig_i2c_bus = I2C_GET_BUS(); - I2C_SET_BUS(1); + orig_i2c_bus = i2c_get_bus_num(); + i2c_set_bus_num(1);
/* goto end; */
@@ -1216,7 +1216,7 @@ int startup_ccdm_id_module(void) failure: result = 1; end: - I2C_SET_BUS(orig_i2c_bus); + i2c_set_bus_num(orig_i2c_bus); if (result) ccdm_hang();
Hello Dirk,
Am 30.04.2014 15:49, schrieb dirk.eibach@gdsys.cc:
From: Dirk Eibachdirk.eibach@gdsys.cc
Signed-off-by: Dirk Eibachdirk.eibach@gdsys.cc
board/gdsys/p1022/controlcenterd-id.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c index 3fca3c5..019df5e 100644 --- a/board/gdsys/p1022/controlcenterd-id.c +++ b/board/gdsys/p1022/controlcenterd-id.c @@ -1189,8 +1189,8 @@ int startup_ccdm_id_module(void) int result = 0; unsigned int orig_i2c_bus;
- orig_i2c_bus = I2C_GET_BUS();
- I2C_SET_BUS(1);
- orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
Nitpicking: Can you replace the "1" with a define?
If all i2c drivers switched to the new API, we can get rid of this "storing from old i2c bus" mechanism complete ... but as this is not done yet:
Acked-by: Heiko Schocher hs@denx.de
bye, Heiko
From: Dirk Eibach dirk.eibach@gdsys.cc
There is a new iocon hardware flavor, supporting DisplayPort finally.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/405ep/iocon.c | 12 +++++ board/gdsys/common/Makefile | 2 +- board/gdsys/common/dp501.c | 33 +++++++++---- board/gdsys/common/osd.c | 111 ++++++++++++++++---------------------------- include/configs/iocon.h | 9 +++- 5 files changed, 83 insertions(+), 84 deletions(-)
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index 7a98e41..079dfb2 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -15,6 +15,7 @@ #include "405ep.h" #include <gdsys_fpga.h>
+#include "../common/dp501.h" #include "../common/osd.h" #include "../common/mclink.h"
@@ -98,6 +99,8 @@ enum { unsigned int mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
+int dp501_i2c[] = CONFIG_SYS_DP501_I2C; + static int setup_88e1518(const char *bus, unsigned char addr);
int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) @@ -371,9 +374,18 @@ int last_stage_init(void) u16 fpga_features; int feature_carrier_speed = fpga_features & (1<<4); bool ch0_rgmii2_present = false; + int old_bus = i2c_get_bus_num();
FPGA_GET_REG(0, fpga_features, &fpga_features);
+ /* Turn on Parade DP501 */ + pca9698_direction_output(0x20, 9, 1); + udelay(500000); + + i2c_set_bus_num(dp501_i2c[0]); + dp501_powerup(0x08); + i2c_set_bus_num(old_bus); + if (!legacy) ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index fb841e0..7f8b427 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -8,6 +8,6 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_IO) += miiphybb.o obj-$(CONFIG_IO64) += miiphybb.o -obj-$(CONFIG_IOCON) += osd.o mclink.o +obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o obj-$(CONFIG_DLVISION_10G) += osd.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index 52f3ea1..e00e589 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -60,8 +60,31 @@ void dp501_powerup(u8 addr) i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */ dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */ dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */ + +#ifdef CONFIG_SYS_DP501_VCAPCTRL0 + i2c_reg_write(addr, 0x24, CONFIG_SYS_DP501_VCAPCTRL0); +#else i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */ +#endif + +#ifdef CONFIG_SYS_DP501_DIFFERENTIAL + i2c_reg_write(addr + 2, 0x24, 0x10); /* clock input differential */ + i2c_reg_write(addr + 2, 0x25, 0x04); + i2c_reg_write(addr + 2, 0x26, 0x10); +#else i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */ +#endif + + i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */ + i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */ + i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */ + i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */ + i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */ + dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */ + i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */ + i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */ + i2c_reg_write(addr, 0x87, 0x70); /* set retry counter as 7 */
if (dp501_detect_cable_adapter(addr)) { printf("DVI/HDMI cable adapter detected\n"); @@ -69,16 +92,6 @@ void dp501_powerup(u8 addr) dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */ } else { printf("no DVI/HDMI cable adapter detected\n"); - i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */ - i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */ - i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */ - i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */ - i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */ - i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */ - dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */ - i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */ - i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */ - i2c_reg_write(addr, 0x87, 0x70); /* set retry counter as 7 */ dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */
dp501_link_training(addr); diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index c49cd9a..0290949 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -58,45 +58,12 @@ unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1; int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; #endif
-#if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178) -static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) -{ - u16 val; - - do { - FPGA_GET_REG(screen, extended_interrupt, &val); - } while (val & (1 << 12)); - - FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg | (data << 8)); - FPGA_SET_REG(screen, i2c.write_mailbox, 0xc400 | (slave << 1)); -} - -static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg) -{ - unsigned int ctr = 0; - u16 val; - - do { - FPGA_GET_REG(screen, extended_interrupt, &val); - } while (val & (1 << 12)); - - FPGA_SET_REG(screen, extended_interrupt, 1 << 14); - FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg); - FPGA_SET_REG(screen, i2c.write_mailbox, 0xc000 | (slave << 1)); - - FPGA_GET_REG(screen, extended_interrupt, &val); - while (!(val & (1 << 14))) { - udelay(100000); - if (ctr++ > 5) { - printf("iic receive timeout\n"); - break; - } - FPGA_GET_REG(screen, extended_interrupt, &val); - } +#ifdef CONFIG_SYS_ICS8N3QV01 +int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C; +#endif
- FPGA_GET_REG(screen, i2c.read_mailbox_ext, &val); - return val >> 8; -} +#ifdef CONFIG_SYS_SIL1178 +int sil1178_i2c[] = CONFIG_SYS_SIL1178_I2C; #endif
#ifdef CONFIG_SYS_MPC92469AC @@ -153,7 +120,7 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout)
#ifdef CONFIG_SYS_ICS8N3QV01
-static unsigned int ics8n3qv01_get_fout_calc(unsigned screen, unsigned index) +static unsigned int ics8n3qv01_get_fout_calc(unsigned index) { unsigned long long n; unsigned long long mint; @@ -164,11 +131,11 @@ static unsigned int ics8n3qv01_get_fout_calc(unsigned screen, unsigned index) if (index > 3) return 0;
- reg_a = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0 + index); - reg_b = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 4 + index); - reg_c = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 8 + index); - reg_d = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 12 + index); - reg_f = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20 + index); + reg_a = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 0 + index); + reg_b = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 4 + index); + reg_c = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 8 + index); + reg_d = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 12 + index); + reg_f = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 20 + index);
mint = ((reg_a >> 1) & 0x1f) | (reg_f & 0x20); mfrac = ((reg_a & 0x01) << 17) | (reg_b << 9) | (reg_c << 1) @@ -216,7 +183,7 @@ static void ics8n3qv01_calc_parameters(unsigned int fout, *_n = n; }
-static void ics8n3qv01_set(unsigned screen, unsigned int fout) +static void ics8n3qv01_set(unsigned int fout) { unsigned int n; unsigned int mint; @@ -226,7 +193,7 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) long long off_ppm; u8 reg0, reg4, reg8, reg12, reg18, reg20;
- fout_calc = ics8n3qv01_get_fout_calc(screen, 1); + fout_calc = ics8n3qv01_get_fout_calc(1); off_ppm = (fout_calc - ICS8N3QV01_F_DEFAULT_1) * 1000000 / ICS8N3QV01_F_DEFAULT_1; printf(" PLL is off by %lld ppm\n", off_ppm); @@ -234,28 +201,28 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) / ICS8N3QV01_F_DEFAULT_1; ics8n3qv01_calc_parameters(fout_prog, &mint, &mfrac, &n);
- reg0 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 0) & 0xc0; + reg0 = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 0) & 0xc0; reg0 |= (mint & 0x1f) << 1; reg0 |= (mfrac >> 17) & 0x01; - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 0, reg0); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 0, reg0);
reg4 = mfrac >> 9; - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 4, reg4); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 4, reg4);
reg8 = mfrac >> 1; - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 8, reg8); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 8, reg8);
reg12 = mfrac << 7; reg12 |= n & 0x7f; - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 12, reg12); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 12, reg12);
- reg18 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 18) & 0x03; + reg18 = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 18) & 0x03; reg18 |= 0x20; - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 18, reg18); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 18, reg18);
- reg20 = fpga_iic_read(screen, ICS8N3QV01_I2C_ADDR, 20) & 0x1f; + reg20 = i2c_reg_read(ICS8N3QV01_I2C_ADDR, 20) & 0x1f; reg20 |= mint & (1 << 5); - fpga_iic_write(screen, ICS8N3QV01_I2C_ADDR, 20, reg20); + i2c_reg_write(ICS8N3QV01_I2C_ADDR, 20, reg20); } #endif
@@ -315,9 +282,7 @@ int osd_probe(unsigned screen) u16 version; u16 features; u8 value; -#ifdef CONFIG_SYS_CH7301 int old_bus = i2c_get_bus_num(); -#endif
FPGA_GET_REG(0, osd.version, &version); FPGA_GET_REG(0, osd.features, &features); @@ -345,7 +310,6 @@ int osd_probe(unsigned screen) i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); - i2c_set_bus_num(old_bus); #endif
#ifdef CONFIG_SYS_MPC92469AC @@ -353,26 +317,29 @@ int osd_probe(unsigned screen) #endif
#ifdef CONFIG_SYS_ICS8N3QV01 - ics8n3qv01_set(screen, PIXCLK_640_480_60); + i2c_set_bus_num(ics8n3qv01_i2c[screen]); + ics8n3qv01_set(PIXCLK_640_480_60); #endif
#ifdef CONFIG_SYS_SIL1178 - value = fpga_iic_read(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x02); + i2c_set_bus_num(sil1178_i2c[screen]); + value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02); if (value != 0x06) { - printf(" Probing CH7301 SIL1178, DEV_IDL %02x\n", value); + printf(" Probing SIL1178, DEV_IDL %02x\n", value); + i2c_set_bus_num(old_bus); return -1; } /* magic initialization sequence adapted from datasheet */ - fpga_iic_write(screen, SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36); - fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); + i2c_reg_write(SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif
FPGA_SET_REG(screen, videocontrol, 0x0002); @@ -385,6 +352,8 @@ int osd_probe(unsigned screen) if (screen > max_osd_screen) max_osd_screen = screen;
+ i2c_set_bus_num(old_bus); + return 0; }
diff --git a/include/configs/iocon.h b/include/configs/iocon.h index f36c2a3..5636f38 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -121,7 +121,9 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
+#define CONFIG_SYS_ICS8N3QV01_I2C {1, 2, 3, 4} #define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} +#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4}
#ifndef __ASSEMBLY__ void fpga_gpio_set(unsigned int bus, int pin); @@ -146,6 +148,8 @@ int fpga_gpio_get(unsigned int bus, int pin); fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ else \ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + while (!!fpga_gpio_get(I2C_ADAP_HWNR, 0x0020) != !!bit) \ + ; \ } while (0) #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
@@ -153,7 +157,6 @@ int fpga_gpio_get(unsigned int bus, int pin); * OSD hardware */ #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_CH7301
/* * FLASH organization @@ -282,9 +285,11 @@ int fpga_gpio_get(unsigned int bus, int pin); /* * OSD Setup */ +#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_CH7301 #define CONFIG_SYS_OSD_SCREENS 1 +#define CONFIG_SYS_DP501_DIFFERENTIAL +#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ #define CONFIG_BITBANGMII_MULTI
From: Dirk Eibach dirk.eibach@gdsys.cc
IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/common/Makefile | 4 +- board/gdsys/common/ihs_i2c.c | 196 +++++++++++++++++++++++++++++++++++++++++ board/gdsys/common/osd.c | 1 - include/configs/dlvision-10g.h | 20 ++++- include/configs/iocon.h | 22 +++-- include/gdsys_fpga.h | 25 +++--- 6 files changed, 245 insertions(+), 23 deletions(-) create mode 100644 board/gdsys/common/ihs_i2c.c
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 7f8b427..a5ee016 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -8,6 +8,6 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_IO) += miiphybb.o obj-$(CONFIG_IO64) += miiphybb.o -obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o -obj-$(CONFIG_DLVISION_10G) += osd.o +obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o ihs_i2c.o +obj-$(CONFIG_DLVISION_10G) += osd.o ihs_i2c.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o diff --git a/board/gdsys/common/ihs_i2c.c b/board/gdsys/common/ihs_i2c.c new file mode 100644 index 0000000..ba2f5dc --- /dev/null +++ b/board/gdsys/common/ihs_i2c.c @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <gdsys_fpga.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum { + I2CINT_ERROR_EV = 1 << 13, + I2CINT_TRANSMIT_EV = 1 << 14, + I2CINT_RECEIVE_EV = 1 << 15, +}; + +static int wait_for_int(bool read) +{ + u16 val; + unsigned int ctr = 0; + + FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); + while (!(val & (I2CINT_ERROR_EV + | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { + udelay(10); + if (ctr++ > 5000) { + printf("I2C timeout\n"); + return 1; + } + FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); + } + + return (val & I2CINT_ERROR_EV) ? 1 : 0; +} + +static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, + bool is_last) +{ + u16 val; + + FPGA_SET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, I2CINT_ERROR_EV + | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV); + FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); + + if (!read && len) { + val = buffer[0]; + + if (len > 1) + val |= buffer[1] << 8; + FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox_ext, val); + } + + FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox, + (read ? 0x8000 : 0x8400) + | (chip << 1) + | ((len > 1) ? (1 << 11) : 0) + | (is_last ? 0 : (1 << 13))); + + if (wait_for_int(read)) + return 1; + + if (read) { + FPGA_GET_REG(I2C_ADAP_HWNR, i2c.read_mailbox_ext, &val); + buffer[0] = val & 0xff; + if (len > 1) + buffer[1] = val >> 8; + } + + return 0; +} + +static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) +{ + int shift = (alen-1) * 8; + + while (alen) { + int transfer = MIN(alen, 2); + uchar buf[2]; + bool is_last = alen <= transfer; + + buf[0] = addr >> shift; + if (alen > 1) + buf[1] = addr >> (shift - 8); + + if (ihs_i2c_transfer(chip, buf, transfer, false, + hold_bus ? false : is_last)) + return 1; + + shift -= 16; + alen -= transfer; + } + + return 0; +} + +static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len, bool read) +{ + if (len <= 0) + return 1; + + if (ihs_i2c_address(chip, addr, alen, !read)) + return 1; + + while (len) { + int transfer = MIN(len, 2); + + if (ihs_i2c_transfer(chip, buffer, transfer, read, + len <= transfer)) + return 1; + + buffer += transfer; + addr += transfer; + len -= transfer; + } + + return 0; +} + + +static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) +{ +#ifdef CONFIG_SYS_I2C_INIT_BOARD + /* + * Call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + */ + i2c_init_board(); +#endif +} + +static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip) +{ + uchar buffer[2]; + + if (ihs_i2c_transfer(chip, buffer, 0, true, true)) + return 1; + + return 0; +} + +static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) +{ + return ihs_i2c_access(adap, chip, addr, alen, buffer, len, true); +} + +static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, + int alen, uchar *buffer, int len) +{ + return ihs_i2c_access(adap, chip, addr, alen, buffer, len, false); +} + +static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap, + unsigned int speed) +{ + if (speed != adap->speed) + return 1; + return speed; +} + +/* + * Register IHS i2c adapters + */ +#ifdef CONFIG_SYS_I2C_IHS_CH0 +U_BOOT_I2C_ADAP_COMPLETE(ihs0, ihs_i2c_init, ihs_i2c_probe, + ihs_i2c_read, ihs_i2c_write, + ihs_i2c_set_bus_speed, + CONFIG_SYS_I2C_IHS_SPEED_0, + CONFIG_SYS_I2C_IHS_SLAVE_0, 0) +#endif +#ifdef CONFIG_SYS_I2C_IHS_CH1 +U_BOOT_I2C_ADAP_COMPLETE(ihs1, ihs_i2c_init, ihs_i2c_probe, + ihs_i2c_read, ihs_i2c_write, + ihs_i2c_set_bus_speed, + CONFIG_SYS_I2C_IHS_SPEED_1, + CONFIG_SYS_I2C_IHS_SLAVE_1, 1) +#endif +#ifdef CONFIG_SYS_I2C_IHS_CH2 +U_BOOT_I2C_ADAP_COMPLETE(ihs2, ihs_i2c_init, ihs_i2c_probe, + ihs_i2c_read, ihs_i2c_write, + ihs_i2c_set_bus_speed, + CONFIG_SYS_I2C_IHS_SPEED_2, + CONFIG_SYS_I2C_IHS_SLAVE_2, 2) +#endif +#ifdef CONFIG_SYS_I2C_IHS_CH3 +U_BOOT_I2C_ADAP_COMPLETE(ihs3, ihs_i2c_init, ihs_i2c_probe, + ihs_i2c_read, ihs_i2c_write, + ihs_i2c_set_bus_speed, + CONFIG_SYS_I2C_IHS_SPEED_3, + CONFIG_SYS_I2C_IHS_SLAVE_3, 3) +#endif diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 0290949..a839a4e 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -342,7 +342,6 @@ int osd_probe(unsigned screen) i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif
- FPGA_SET_REG(screen, videocontrol, 0x0002); FPGA_SET_REG(screen, osd.control, 0x0049);
FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1)); diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 7877897..d886740 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -97,9 +97,22 @@ /* * I2C stuff */ +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F + +#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F + +#define CONFIG_SYS_SPD_BUS_NUM 2
/* Temp sensor/hwmon/dtt */ +#define CONFIG_SYS_DTT_BUS_NUM 2 #define CONFIG_DTT_LM63 1 /* National LM63 */ #define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ @@ -107,6 +120,11 @@ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10
+#define CONFIG_SYS_ICS8N3QV01 +#define CONFIG_SYS_ICS8N3QV01_I2C {0, 1} +#define CONFIG_SYS_SIL1178 +#define CONFIG_SYS_SIL1178_I2C {0, 1} + /* EBC peripherals */
#define CONFIG_SYS_FLASH_BASE 0xFC000000 @@ -306,9 +324,7 @@ /* * OSD Setup */ -#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_SIL1178 #define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
#endif /* __CONFIG_H */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 5636f38..7fa41ee 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -101,10 +101,24 @@ #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_SPD_BUS_NUM 4
#define CONFIG_PCA953X /* NXP PCA9554 */ #define CONFIG_PCA9698 /* NXP PCA9698 */
+#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2 +#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_IHS_CH3 +#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F + /* * Software (bit-bang) I2C driver configuration */ @@ -121,9 +135,9 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
-#define CONFIG_SYS_ICS8N3QV01_I2C {1, 2, 3, 4} -#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} -#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} +#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} +#define CONFIG_SYS_DP501_I2C {0, 1, 2, 3}
#ifndef __ASSEMBLY__ void fpga_gpio_set(unsigned int bus, int pin); @@ -148,8 +162,6 @@ int fpga_gpio_get(unsigned int bus, int pin); fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ else \ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ - while (!!fpga_gpio_get(I2C_ADAP_HWNR, 0x0020) != !!bit) \ - ; \ } while (0) #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 85ddbcb..276a01e 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -43,10 +43,12 @@ struct ihs_gpio { };
struct ihs_i2c { - u16 write_mailbox; + u16 interrupt_status; + u16 interrupt_enable; u16 write_mailbox_ext; - u16 read_mailbox; + u16 write_mailbox; u16 read_mailbox_ext; + u16 read_mailbox; };
struct ihs_osd { @@ -84,7 +86,6 @@ struct ihs_fpga { #endif
#ifdef CONFIG_IO64 - struct ihs_fpga_channel { u16 status_int; u16 config_int; @@ -121,9 +122,9 @@ struct ihs_fpga { u16 reserved_0[6]; /* 0x0008 */ struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */ - u16 reserved_1[19]; /* 0x001c */ - u16 videocontrol; /* 0x0042 */ - u16 reserved_2[14]; /* 0x0044 */ + u16 reserved_1[18]; /* 0x001c */ + struct ihs_i2c i2c; /* 0x0040 */ + u16 reserved_2[10]; /* 0x004c */ u16 mc_int; /* 0x0060 */ u16 mc_int_en; /* 0x0062 */ u16 mc_status; /* 0x0064 */ @@ -150,15 +151,13 @@ struct ihs_fpga { u16 fpga_features; /* 0x0006 */ u16 reserved_0[10]; /* 0x0008 */ u16 extended_interrupt; /* 0x001c */ - u16 reserved_1[9]; /* 0x001e */ - struct ihs_i2c i2c; /* 0x0030 */ - u16 reserved_2[16]; /* 0x0038 */ + u16 reserved_1[29]; /* 0x001e */ u16 mpc3w_control; /* 0x0058 */ - u16 reserved_3[34]; /* 0x005a */ - u16 videocontrol; /* 0x009e */ - u16 reserved_4[176]; /* 0x00a0 */ + u16 reserved_2[3]; /* 0x005a */ + struct ihs_i2c i2c; /* 0x0060 */ + u16 reserved_3[205]; /* 0x0066 */ struct ihs_osd osd; /* 0x0200 */ - u16 reserved_5[761]; /* 0x020e */ + u16 reserved_4[761]; /* 0x020e */ u16 videomem[31736]; /* 0x0800 */ }; #endif
Hello Dirk,
Am 30.04.2014 15:49, schrieb dirk.eibach@gdsys.cc:
From: Dirk Eibachdirk.eibach@gdsys.cc
IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features.
Signed-off-by: Dirk Eibachdirk.eibach@gdsys.cc
board/gdsys/common/Makefile | 4 +- board/gdsys/common/ihs_i2c.c | 196 +++++++++++++++++++++++++++++++++++++++++
Hmm... why you do not add this i2c driver to drivers/i2c ?
board/gdsys/common/osd.c | 1 - include/configs/dlvision-10g.h | 20 ++++- include/configs/iocon.h | 22 +++-- include/gdsys_fpga.h | 25 +++--- 6 files changed, 245 insertions(+), 23 deletions(-) create mode 100644 board/gdsys/common/ihs_i2c.c
diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 7f8b427..a5ee016 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -8,6 +8,6 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_IO) += miiphybb.o obj-$(CONFIG_IO64) += miiphybb.o -obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o -obj-$(CONFIG_DLVISION_10G) += osd.o +obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o ihs_i2c.o +obj-$(CONFIG_DLVISION_10G) += osd.o ihs_i2c.o
and add a proper CONFIG define for this i2c driver.
obj-$(CONFIG_CONTROLCENTERD) += dp501.o diff --git a/board/gdsys/common/ihs_i2c.c b/board/gdsys/common/ihs_i2c.c new file mode 100644 index 0000000..ba2f5dc --- /dev/null +++ b/board/gdsys/common/ihs_i2c.c @@ -0,0 +1,196 @@ +/*
- (C) Copyright 2013
- Dirk Eibach, Guntermann& Drunck GmbH, eibach@gdsys.de
- SPDX-License-Identifier: GPL-2.0+
- */
+#include<common.h> +#include<i2c.h> +#include<gdsys_fpga.h>
+DECLARE_GLOBAL_DATA_PTR;
+enum {
- I2CINT_ERROR_EV = 1<< 13,
- I2CINT_TRANSMIT_EV = 1<< 14,
- I2CINT_RECEIVE_EV = 1<< 15,
+};
+static int wait_for_int(bool read) +{
- u16 val;
- unsigned int ctr = 0;
- FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status,&val);
- while (!(val& (I2CINT_ERROR_EV
| (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) {udelay(10);if (ctr++> 5000) {printf("I2C timeout\n");return 1;}FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status,&val);- }
- return (val& I2CINT_ERROR_EV) ? 1 : 0;
+}
+static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read,
bool is_last)+{
- u16 val;
- FPGA_SET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, I2CINT_ERROR_EV
| I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV);- FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status,&val);
- if (!read&& len) {
Nitpick: please:
if (!read && len) {
val = buffer[0];if (len> 1)val |= buffer[1]<< 8;
here too:
val |= buffer[1] << 8;
Please check globally.
FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox_ext, val);- }
- FPGA_SET_REG(I2C_ADAP_HWNR, i2c.write_mailbox,
(read ? 0x8000 : 0x8400)
Could you use defines for this magic constants?
| (chip<< 1)| ((len> 1) ? (1<< 11) : 0)| (is_last ? 0 : (1<< 13)));
and here too ...
- if (wait_for_int(read))
return 1;- if (read) {
FPGA_GET_REG(I2C_ADAP_HWNR, i2c.read_mailbox_ext,&val);buffer[0] = val& 0xff;if (len> 1)buffer[1] = val>> 8;- }
- return 0;
+}
+static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) +{
- int shift = (alen-1) * 8;
- while (alen) {
int transfer = MIN(alen, 2);uchar buf[2];bool is_last = alen<= transfer;buf[0] = addr>> shift;if (alen> 1)buf[1] = addr>> (shift - 8);if (ihs_i2c_transfer(chip, buf, transfer, false,hold_bus ? false : is_last))return 1;shift -= 16;alen -= transfer;- }
- return 0;
+}
+static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len, bool read)+{
- if (len<= 0)
return 1;- if (ihs_i2c_address(chip, addr, alen, !read))
return 1;- while (len) {
int transfer = MIN(len, 2);if (ihs_i2c_transfer(chip, buffer, transfer, read,len<= transfer))return 1;buffer += transfer;addr += transfer;len -= transfer;- }
- return 0;
+}
+static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) +{ +#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /*
* Call board specific i2c bus reset routine before accessing the* environment, which might be in a chip on that bus. For details* about this problem see doc/I2C_Edge_Conditions.*/- i2c_init_board();
+#endif +}
+static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip) +{
- uchar buffer[2];
- if (ihs_i2c_transfer(chip, buffer, 0, true, true))
return 1;- return 0;
+}
+static int ihs_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)+{
- return ihs_i2c_access(adap, chip, addr, alen, buffer, len, true);
+}
+static int ihs_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)+{
- return ihs_i2c_access(adap, chip, addr, alen, buffer, len, false);
+}
+static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap,
unsigned int speed)+{
- if (speed != adap->speed)
return 1;- return speed;
+}
+/*
- Register IHS i2c adapters
- */
+#ifdef CONFIG_SYS_I2C_IHS_CH0 +U_BOOT_I2C_ADAP_COMPLETE(ihs0, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,ihs_i2c_set_bus_speed,CONFIG_SYS_I2C_IHS_SPEED_0,CONFIG_SYS_I2C_IHS_SLAVE_0, 0)+#endif +#ifdef CONFIG_SYS_I2C_IHS_CH1 +U_BOOT_I2C_ADAP_COMPLETE(ihs1, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,ihs_i2c_set_bus_speed,CONFIG_SYS_I2C_IHS_SPEED_1,CONFIG_SYS_I2C_IHS_SLAVE_1, 1)+#endif +#ifdef CONFIG_SYS_I2C_IHS_CH2 +U_BOOT_I2C_ADAP_COMPLETE(ihs2, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,ihs_i2c_set_bus_speed,CONFIG_SYS_I2C_IHS_SPEED_2,CONFIG_SYS_I2C_IHS_SLAVE_2, 2)+#endif +#ifdef CONFIG_SYS_I2C_IHS_CH3 +U_BOOT_I2C_ADAP_COMPLETE(ihs3, ihs_i2c_init, ihs_i2c_probe,
ihs_i2c_read, ihs_i2c_write,ihs_i2c_set_bus_speed,CONFIG_SYS_I2C_IHS_SPEED_3,CONFIG_SYS_I2C_IHS_SLAVE_3, 3)+#endif diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 0290949..a839a4e 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -342,7 +342,6 @@ int osd_probe(unsigned screen) i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif
- FPGA_SET_REG(screen, videocontrol, 0x0002);
What has this change to do with the i2c driver? Please move this to a seperate patch, thanks!
FPGA_SET_REG(screen, osd.control, 0x0049);
FPGA_SET_REG(screen, osd.xy_size, ((32 - 1)<< 8) | (16 - 1));
Hmm... a lot of magic constants ...
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 7877897..d886740 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -97,9 +97,22 @@ /*
- I2C stuff
*/ +#define CONFIG_SYS_I2C_PPC4XX +#define CONFIG_SYS_I2C_PPC4XX_CH0 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 +#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
Here again, this change has nothing todo with adding this new i2c driver ...
Please split this in another patch, thanks.
+#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
+#define CONFIG_SYS_SPD_BUS_NUM 2
/* Temp sensor/hwmon/dtt */ +#define CONFIG_SYS_DTT_BUS_NUM 2 #define CONFIG_DTT_LM63 1 /* National LM63 */ #define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ @@ -107,6 +120,11 @@ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10
+#define CONFIG_SYS_ICS8N3QV01 +#define CONFIG_SYS_ICS8N3QV01_I2C {0, 1} +#define CONFIG_SYS_SIL1178 +#define CONFIG_SYS_SIL1178_I2C {0, 1}
and this ...
/* EBC peripherals */
#define CONFIG_SYS_FLASH_BASE 0xFC000000
@@ -306,9 +324,7 @@ /*
- OSD Setup
*/ -#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_MPC92469AC -#define CONFIG_SYS_SIL1178 #define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT
#endif /* __CONFIG_H */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 5636f38..7fa41ee 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -101,10 +101,24 @@ #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_SPD_BUS_NUM 4
#define CONFIG_PCA953X /* NXP PCA9554 */ #define CONFIG_PCA9698 /* NXP PCA9698 */
+#define CONFIG_SYS_I2C_IHS_CH0 +#define CONFIG_SYS_I2C_IHS_SPEED_0 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_IHS_CH1 +#define CONFIG_SYS_I2C_IHS_SPEED_1 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F +#define CONFIG_SYS_I2C_IHS_CH2 +#define CONFIG_SYS_I2C_IHS_SPEED_2 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F +#define CONFIG_SYS_I2C_IHS_CH3 +#define CONFIG_SYS_I2C_IHS_SPEED_3 50000 +#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F
- /*
*/
- Software (bit-bang) I2C driver configuration
@@ -121,9 +135,9 @@ #define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
-#define CONFIG_SYS_ICS8N3QV01_I2C {1, 2, 3, 4} -#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} -#define CONFIG_SYS_DP501_I2C {1, 2, 3, 4} +#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8} +#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8} +#define CONFIG_SYS_DP501_I2C {0, 1, 2, 3}
#ifndef __ASSEMBLY__ void fpga_gpio_set(unsigned int bus, int pin); @@ -148,8 +162,6 @@ int fpga_gpio_get(unsigned int bus, int pin); fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ else \ fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \
while (!!fpga_gpio_get(I2C_ADAP_HWNR, 0x0020) != !!bit) \; \diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 85ddbcb..276a01e 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -43,10 +43,12 @@ struct ihs_gpio { };
struct ihs_i2c {
- u16 write_mailbox;
- u16 interrupt_status;
- u16 interrupt_enable; u16 write_mailbox_ext;
- u16 read_mailbox;
u16 write_mailbox; u16 read_mailbox_ext;
u16 read_mailbox; };
struct ihs_osd {
@@ -84,7 +86,6 @@ struct ihs_fpga { #endif
#ifdef CONFIG_IO64
- struct ihs_fpga_channel { u16 status_int; u16 config_int;
@@ -121,9 +122,9 @@ struct ihs_fpga { u16 reserved_0[6]; /* 0x0008 */ struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */
- u16 reserved_1[19]; /* 0x001c */
- u16 videocontrol; /* 0x0042 */
- u16 reserved_2[14]; /* 0x0044 */
- u16 reserved_1[18]; /* 0x001c */
- struct ihs_i2c i2c; /* 0x0040 */
- u16 reserved_2[10]; /* 0x004c */ u16 mc_int; /* 0x0060 */ u16 mc_int_en; /* 0x0062 */ u16 mc_status; /* 0x0064 */
@@ -150,15 +151,13 @@ struct ihs_fpga { u16 fpga_features; /* 0x0006 */ u16 reserved_0[10]; /* 0x0008 */ u16 extended_interrupt; /* 0x001c */
- u16 reserved_1[9]; /* 0x001e */
- struct ihs_i2c i2c; /* 0x0030 */
- u16 reserved_2[16]; /* 0x0038 */
- u16 reserved_1[29]; /* 0x001e */ u16 mpc3w_control; /* 0x0058 */
- u16 reserved_3[34]; /* 0x005a */
- u16 videocontrol; /* 0x009e */
- u16 reserved_4[176]; /* 0x00a0 */
- u16 reserved_2[3]; /* 0x005a */
- struct ihs_i2c i2c; /* 0x0060 */
- u16 reserved_3[205]; /* 0x0066 */ struct ihs_osd osd; /* 0x0200 */
- u16 reserved_5[761]; /* 0x020e */
- u16 reserved_4[761]; /* 0x020e */ u16 videomem[31736]; /* 0x0800 */ }; #endif
bye, Heiko
From: Dirk Eibach dirk.eibach@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
include/configs/dlvision-10g.h | 2 +- include/configs/iocon.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index d886740..b866598 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -17,7 +17,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.05" +#define CONFIG_IDENT_STRING " dlvision-10g 0.06" #include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 7fa41ee..d942e8f 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -17,7 +17,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.05" +#define CONFIG_IDENT_STRING " iocon 0.06" #include "amcc-common.h"
#define CONFIG_BOARD_EARLY_INIT_F
From: Dirk Eibach dirk.eibach@gdsys.cc
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/common/dp501.c | 1 + include/configs/controlcenterd.h | 7 ++++--- 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index e00e589..7958bae 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -54,6 +54,7 @@ static void dp501_link_training(u8 addr) void dp501_powerup(u8 addr) { dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */ + dp501_setbits(addr, 0x0a, 0x0e); /* block HDCP and MCCS on I2C bride*/ i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */ dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */ dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */ diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 868813f..ec3145f 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -199,9 +199,10 @@ #define CONFIG_SYS_FSL_I2C2_SPEED 400000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -/* Probing DP501 I2C-Bridge will hang */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x30}, {0, 0x37}, {0, 0x3a}, \ - {0, 0x3b}, {0, 0x50} } + +#ifndef CONFIG_TRAILBLAZER +#define CONFIG_CMD_I2C +#endif
#define CONFIG_PCA9698 /* NXP PCA9698 */
From: Dirk Eibach dirk.eibach@gdsys.cc
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/405ep/iocon.c | 17 ++----- board/gdsys/common/ihs_i2c.c | 1 - board/gdsys/common/osd.c | 113 +++++++++++++++++++++++++++-------------- include/configs/dlvision-10g.h | 2 - include/configs/iocon.h | 6 --- 5 files changed, 79 insertions(+), 60 deletions(-)
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index 079dfb2..6ae15e1 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -15,7 +15,6 @@ #include "405ep.h" #include <gdsys_fpga.h>
-#include "../common/dp501.h" #include "../common/osd.h" #include "../common/mclink.h"
@@ -99,8 +98,6 @@ enum { unsigned int mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
-int dp501_i2c[] = CONFIG_SYS_DP501_I2C; - static int setup_88e1518(const char *bus, unsigned char addr);
int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) @@ -374,20 +371,16 @@ int last_stage_init(void) u16 fpga_features; int feature_carrier_speed = fpga_features & (1<<4); bool ch0_rgmii2_present = false; - int old_bus = i2c_get_bus_num();
FPGA_GET_REG(0, fpga_features, &fpga_features);
- /* Turn on Parade DP501 */ - pca9698_direction_output(0x20, 9, 1); - udelay(500000); - - i2c_set_bus_num(dp501_i2c[0]); - dp501_powerup(0x08); - i2c_set_bus_num(old_bus); + if (!legacy) { + /* Turn on Parade DP501 */ + pca9698_direction_output(0x20, 9, 1); + udelay(500000);
- if (!legacy) ch0_rgmii2_present = !pca9698_get_value(0x20, 30); + }
print_fpga_info(0, ch0_rgmii2_present); osd_probe(0); diff --git a/board/gdsys/common/ihs_i2c.c b/board/gdsys/common/ihs_i2c.c index ba2f5dc..cdea155 100644 --- a/board/gdsys/common/ihs_i2c.c +++ b/board/gdsys/common/ihs_i2c.c @@ -27,7 +27,6 @@ static int wait_for_int(bool read) | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { udelay(10); if (ctr++ > 5000) { - printf("I2C timeout\n"); return 1; } FPGA_GET_REG(I2C_ADAP_HWNR, i2c.interrupt_status, &val); diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index a839a4e..1c765e4 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -9,6 +9,7 @@ #include <i2c.h> #include <malloc.h>
+#include "dp501.h" #include <gdsys_fpga.h>
#define CH7301_I2C_ADDR 0x75 @@ -24,6 +25,8 @@ #define SIL1178_MASTER_I2C_ADDRESS 0x38 #define SIL1178_SLAVE_I2C_ADDRESS 0x39
+#define DP501_I2C_ADDR 0x08 + #define PIXCLK_640_480_60 25180000
enum { @@ -54,18 +57,23 @@ u16 *buf;
unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1;
-#ifdef CONFIG_SYS_CH7301 -int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; +#ifdef CONFIG_SYS_ICS8N3QV01_I2C +int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C; #endif
-#ifdef CONFIG_SYS_ICS8N3QV01 -int ics8n3qv01_i2c[] = CONFIG_SYS_ICS8N3QV01_I2C; +#ifdef CONFIG_SYS_CH7301_I2C +int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; #endif
-#ifdef CONFIG_SYS_SIL1178 +#ifdef CONFIG_SYS_SIL1178_I2C int sil1178_i2c[] = CONFIG_SYS_SIL1178_I2C; #endif
+#ifdef CONFIG_SYS_DP501_I2C +int dp501_i2c[] = CONFIG_SYS_DP501_I2C; +#endif + + #ifdef CONFIG_SYS_MPC92469AC static void mpc92469ac_calc_parameters(unsigned int fout, unsigned int *post_div, unsigned int *feedback_div) @@ -118,7 +126,7 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout) } #endif
-#ifdef CONFIG_SYS_ICS8N3QV01 +#ifdef CONFIG_SYS_ICS8N3QV01_I2C
static unsigned int ics8n3qv01_get_fout_calc(unsigned index) { @@ -283,6 +291,8 @@ int osd_probe(unsigned screen) u16 features; u8 value; int old_bus = i2c_get_bus_num(); + bool pixclock_present = false; + bool output_driver_present = false;
FPGA_GET_REG(0, osd.version, &version); FPGA_GET_REG(0, osd.features, &features); @@ -297,51 +307,76 @@ int osd_probe(unsigned screen) printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", screen, version/100, version%100, base_width, base_height);
-#ifdef CONFIG_SYS_CH7301 - i2c_set_bus_num(ch7301_i2c[screen]); - value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); - if (value != 0x17) { - printf(" Probing CH7301 failed, DID %02x\n", value); - i2c_set_bus_num(old_bus); - return -1; - } - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); - i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); -#endif + /* setup pixclock */
#ifdef CONFIG_SYS_MPC92469AC + pixclock_present = true; mpc92469ac_set(screen, PIXCLK_640_480_60); #endif
-#ifdef CONFIG_SYS_ICS8N3QV01 +#ifdef CONFIG_SYS_ICS8N3QV01_I2C i2c_set_bus_num(ics8n3qv01_i2c[screen]); - ics8n3qv01_set(PIXCLK_640_480_60); + if (!i2c_probe(ICS8N3QV01_I2C_ADDR)) { + ics8n3qv01_set(PIXCLK_640_480_60); + pixclock_present = true; + } #endif
-#ifdef CONFIG_SYS_SIL1178 + if (!pixclock_present) + printf(" no pixelclock found\n"); + + /* setup output driver */ + +#ifdef CONFIG_SYS_CH7301_I2C + i2c_set_bus_num(ch7301_i2c[screen]); + if (!i2c_probe(CH7301_I2C_ADDR)) { + value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); + if (value == 0x17) { + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPD, 0x16); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); + i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); + output_driver_present = true; + } + } +#endif + +#ifdef CONFIG_SYS_SIL1178_I2C i2c_set_bus_num(sil1178_i2c[screen]); - value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02); - if (value != 0x06) { - printf(" Probing SIL1178, DEV_IDL %02x\n", value); - i2c_set_bus_num(old_bus); - return -1; + if (!i2c_probe(SIL1178_SLAVE_I2C_ADDRESS)) { + value = i2c_reg_read(SIL1178_SLAVE_I2C_ADDRESS, 0x02); + if (value == 0x06) { + /* + * magic initialization sequence, + * adapted from datasheet + */ + i2c_reg_write(SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36); + i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); + output_driver_present = true; + } + } +#endif + +#ifdef CONFIG_SYS_DP501_I2C + i2c_set_bus_num(dp501_i2c[screen]); + if (!i2c_probe(DP501_I2C_ADDR)) { + dp501_powerup(DP501_I2C_ADDR); + output_driver_present = true; } - /* magic initialization sequence adapted from datasheet */ - i2c_reg_write(SIL1178_SLAVE_I2C_ADDRESS, 0x08, 0x36); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x44); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0f, 0x4c); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0e, 0x10); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0a, 0x80); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x09, 0x30); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0c, 0x89); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x0d, 0x60); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x36); - i2c_reg_write(SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif
+ if (!output_driver_present) + printf(" no output driver found\n"); + FPGA_SET_REG(screen, osd.control, 0x0049);
FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1)); diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index b866598..77802d8 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -120,9 +120,7 @@ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10
-#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_ICS8N3QV01_I2C {0, 1} -#define CONFIG_SYS_SIL1178 #define CONFIG_SYS_SIL1178_I2C {0, 1}
/* EBC peripherals */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index d942e8f..0aeb95a 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -166,11 +166,6 @@ int fpga_gpio_get(unsigned int bus, int pin); #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
/* - * OSD hardware - */ -#define CONFIG_SYS_MPC92469AC - -/* * FLASH organization */ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ @@ -297,7 +292,6 @@ int fpga_gpio_get(unsigned int bus, int pin); /* * OSD Setup */ -#define CONFIG_SYS_ICS8N3QV01 #define CONFIG_SYS_MPC92469AC #define CONFIG_SYS_OSD_SCREENS 1 #define CONFIG_SYS_DP501_DIFFERENTIAL
From: Dirk Eibach dirk.eibach@gdsys.cc
For proper displayport performance, scrambling has to be enabled, but is turned off on DP501 by default.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/common/dp501.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index 7958bae..7eb15ed 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -61,6 +61,7 @@ void dp501_powerup(u8 addr) i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */ dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */ dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */ + dp501_clrbits(addr, 0x60, 0x20); /* Enable scrambling */
#ifdef CONFIG_SYS_DP501_VCAPCTRL0 i2c_reg_write(addr, 0x24, CONFIG_SYS_DP501_VCAPCTRL0);
From: Dirk Eibach dirk.eibach@gdsys.cc
To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize PHYs as soon as possible.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
board/gdsys/405ep/iocon.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index 6ae15e1..1bac970 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -377,14 +377,10 @@ int last_stage_init(void) if (!legacy) { /* Turn on Parade DP501 */ pca9698_direction_output(0x20, 9, 1); - udelay(500000);
ch0_rgmii2_present = !pca9698_get_value(0x20, 30); }
- print_fpga_info(0, ch0_rgmii2_present); - osd_probe(0); - /* wait for FPGA done */ for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { unsigned int ctr = 0; @@ -413,13 +409,16 @@ int last_stage_init(void) } }
- /* wait for slave-PLLs to be up and running */ + /* give slave-PLLs and Parade DP501 some time to be up and running */ udelay(500000);
mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; slaves = mclink_probe(); mclink_fpgacount = 0;
+ print_fpga_info(0, ch0_rgmii2_present); + osd_probe(0); + if (slaves <= 0) return 0;
From: Dirk Eibach dirk.eibach@gdsys.cc
Commit "2842c1c fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory.
Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint.
Signed-off-by: Dirk Eibach dirk.eibach@gdsys.cc ---
include/configs/dlvision-10g.h | 7 ++++++- include/configs/io.h | 7 ++++++- include/configs/iocon.h | 8 ++++++-- include/configs/neo.h | 8 ++++++-- 4 files changed, 24 insertions(+), 6 deletions(-)
diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 77802d8..d8a1c0c 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -64,9 +64,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS
/* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/io.h b/include/configs/io.h index 9da6cc6..649c0fb 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -64,9 +64,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS
/* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 0aeb95a..e2a77b8 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -61,9 +61,13 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_FPGAD +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS
/* * SDRAM configuration (please see cpu/ppc/sdram.[ch]) diff --git a/include/configs/neo.h b/include/configs/neo.h index d549985..75dc862 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -61,10 +61,14 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE #define CONFIG_CMD_DTT +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_DIAG #undef CONFIG_CMD_EEPROM +#undef CONFIG_CMD_ELF +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_IRQ +#undef CONFIG_CMD_NFS
/* * SDRAM configuration (please see cpu/ppc/sdram.[ch])
Hello Dirk,
Am 30.04.2014 15:50, schrieb dirk.eibach@gdsys.cc:
From: Dirk Eibachdirk.eibach@gdsys.cc
Commit "2842c1c fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory.
Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint.
Patches are welcome ;-)
bye, Heiko
participants (2)
-
dirk.eibach＠gdsys.cc -
Heiko Schocher