[U-Boot] rk3288 u-boot
Hi, I'd like to update provided u-boot image on a rk3288 FireFly board with a standard version. There is any u-boot mainline branch that has network support for rk3288 (gmac). Could someone suggest me which u-boot should I use? thank you for the attention, regards Andrea
Software Department software@teseo.com
------------------------------------------------------------------------------------------------------------- TESEO spa via Agnelli, 49 63023 FERMO (FM) ITALY Tel. +39 0734 628818 -- Fax. +39 0734 628816
Disclaimer: This electronic mail transmission may contain legally privileged and/or confidential information. Do not read this if you are not the person(s) named. Any use, distribution, copying or disclosure by any other person is strictly prohibited. If you receive this transmission by mistake destroy the original transmission and its attachments without reading or saving in any manner.
Hi Andrea,
On 26 September 2016 at 08:39, Andrea Di Chiara andrea.dichiara@teseo.com wrote:
Hi, I'd like to update provided u-boot image on a rk3288 FireFly board with a standard version. There is any u-boot mainline branch that has network support for rk3288 (gmac). Could someone suggest me which u-boot should I use?
There are some patches on the list, but AFAIK they were not updated.
See the series starting here:
http://patchwork.ozlabs.org/patch/524889/
Regards, Simon
thank you for the attention, regards Andrea
Software Department software@teseo.com
[...]
participants (2)
-
Andrea Di Chiara -
Simon Glass