[PATCH v2 0/5] stm32mp1: handle TF-A boot with FIP

newer
[PATCH v2 0/5] Add SIMATIC IOT2050...

older
[Patch V3 00/44] imx: add i.MX8ULP...

Patrick Delaunay

15 Jul 2021 15 Jul '21

5:22 p.m.

In next TF-A version the stm32mp1 platform will support the Firmware Image Package (FIP) [1], a container filled with: - the U-Boot binary = u-boot-nodtb.bin - the U-Boot device tree = u-boot.dtb - the Secure OS (OP-TEE) or the secure monitor (SP_MIN)

Upstream is in progress on TF-A side ([3] but reviews don't yet start).

Each part of the FIP is loaded by TF-A BL2 and U-Boot is executed with its device tree address as parameter (nt_fw_dtb = r2 introduced by commit 4ac345220afa ("board: stm32mp1: use FDT address provided by TF-A at boot time")

This FIP container simplifies the OP-TEE management (same number of partition with or without OP-TEE, OP-TEE dynamically updates the U-Boot device tree to add the required OP-TEE nodes) and allow support of generic TF-A features as PKI [2].

This serie allows to generate U-Boot configured for the TF-A BL2 image types: - STM32IMAGE: stm32mp15_trusted_defconfig (current behavior) - FIP: stm32mp15_defconfig (NEW)

The FIP will be the STMicroelectronics recommended image type for STM32MP15x and the STM32IMAGE support should be marked deprecated in a future TF-A release.

To prepare this migration, the serie move all the specific code or device tree nodes for TF-A load of STM32IMAGE under compilation flag CONFIG_STM32MP15x_STM32IMAGE.

This V2 serie of [4] is rebased on top for u-boot-stm32/master.

[1] 4.11. Firmware Image Package (FIP) fiphttps://trustedfirmware-a.readthedocs.io/en/latest/design/firmware-design.ht... stm32mp1: handle TF-A boot with FIP [2] Authentication Framework & Chain of Trust https://trustedfirmware-a.readthedocs.io/en/latest/design/auth-framework.htm...

[3] TF-A Serie proposal : FIP and FCONF for STM32MP1 https://github.com/Yann-lms/arm-trusted-firmware/commits/fip_fconf

[4] stm32mp1: handle TF-A boot with FIP http://patchwork.ozlabs.org/project/uboot/list/?series=252477&state=*

Changes in v2: - synchronize defconfig with latest change - fix one typo: s/ enought / enough

Patrick Delaunay (5): arm: stm32mp: add config for STM32IMAGE support arm: stm32mp: handle the OP-TEE nodes in DT with FIP support arm: stm32mp: add defconfig for trusted boot with FIP doc: st: stm32mp1: Add FIP support for trusted boot stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP

arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 9 +- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 9 +- arch/arm/mach-stm32mp/Kconfig | 7 + .../cmd_stm32prog/cmd_stm32prog.c | 2 + .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 + .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 + arch/arm/mach-stm32mp/config.mk | 2 +- arch/arm/mach-stm32mp/fdt.c | 11 +- .../arm/mach-stm32mp/include/mach/stm32prog.h | 2 + board/st/common/Kconfig | 21 ++- board/st/common/stm32mp_mtdparts.c | 31 +++- board/st/stm32mp1/MAINTAINERS | 1 + board/st/stm32mp1/stm32mp1.c | 10 +- configs/stm32mp15_defconfig | 158 +++++++++++++++++ configs/stm32mp15_trusted_defconfig | 1 + doc/board/st/stm32mp1.rst | 166 ++++++++++-------- 16 files changed, 346 insertions(+), 90 deletions(-) create mode 100644 configs/stm32mp15_defconfig

-- 2.25.1

Show replies by date

Patrick Delaunay

15 Jul 15 Jul

5:22 p.m.

New subject: [PATCH v2 1/5] arm: stm32mp: add config for STM32IMAGE support

By default for trusted boot with TF-A, U-Boot (u-boot-nodtb) is located in FIP container with its device tree and with the secure monitor (provided by TF-A or OP-TEE). The FIP file is loaded by TF-A BL2 and each components is extracted at the final location.

This patch add CONFIG_STM32MP15x_STM32IMAGE to request the STM32 image generation for SOC STM32MP15x when FIP container is not used (u-boot.stm32 is loaded by TF-A as done previously to keep the backward compatibility).

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---

(no changes since v1)

arch/arm/mach-stm32mp/Kconfig | 7 +++++++ arch/arm/mach-stm32mp/config.mk | 2 +- board/st/stm32mp1/stm32mp1.c | 10 +++++++--- configs/stm32mp15_trusted_defconfig | 1 + 4 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig index 0e59931679..b9e623bc3c 100644 --- a/arch/arm/mach-stm32mp/Kconfig +++ b/arch/arm/mach-stm32mp/Kconfig @@ -56,6 +56,13 @@ config STM32MP15x dual core A7 for STM32MP157/3, monocore for STM32MP151 target all the STMicroelectronics board with SOC STM32MP1 family

+config STM32MP15x_STM32IMAGE + bool "Support STM32 image for generated U-Boot image" + depends on STM32MP15x && TFABOOT + help + Support of STM32 image generation for SOC STM32MP15x + for TF-A boot when FIP container is not used + choice prompt "STM32MP15x board select" optional diff --git a/arch/arm/mach-stm32mp/config.mk b/arch/arm/mach-stm32mp/config.mk index c30bf482f7..f7f5b77c41 100644 --- a/arch/arm/mach-stm32mp/config.mk +++ b/arch/arm/mach-stm32mp/config.mk @@ -4,7 +4,7 @@ #

ifndef CONFIG_SPL -INPUTS-y += u-boot.stm32 +INPUTS-$(CONFIG_STM32MP15x_STM32IMAGE) += u-boot.stm32 else ifdef CONFIG_SPL_BUILD INPUTS-y += u-boot-spl.stm32 diff --git a/board/st/stm32mp1/stm32mp1.c b/board/st/stm32mp1/stm32mp1.c index 2faf5c81b4..70bd4d1ed5 100644 --- a/board/st/stm32mp1/stm32mp1.c +++ b/board/st/stm32mp1/stm32mp1.c @@ -105,10 +105,14 @@ int checkboard(void) const char *fdt_compat; int fdt_compat_len;

- if (IS_ENABLED(CONFIG_TFABOOT)) - mode = "trusted"; - else + if (IS_ENABLED(CONFIG_TFABOOT)) { + if (IS_ENABLED(CONFIG_STM32MP15x_STM32IMAGE)) + mode = "trusted - stm32image"; + else + mode = "trusted"; + } else { mode = "basic"; + }

fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible", &fdt_compat_len); diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig index a58ea91d3e..6a8ccb1f3d 100644 --- a/configs/stm32mp15_trusted_defconfig +++ b/configs/stm32mp15_trusted_defconfig @@ -7,6 +7,7 @@ CONFIG_SYS_MEMTEST_END=0xc4000000 CONFIG_ENV_OFFSET=0x280000 CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" +CONFIG_STM32MP15x_STM32IMAGE=y CONFIG_TARGET_ST_STM32MP15x=y CONFIG_CMD_STM32KEY=y CONFIG_CMD_STM32PROG=y

-- 2.25.1

Patrick Delaunay

5:22 p.m.

New subject: [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support

With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE is not activated), the DT nodes needed by OP-TEE are added by OP-TEE firmware in U-Boot device tree, present in FIP.

These nodes are only required in trusted boot, when TF-A load the file u-boot.stm32, including the U-Boot device tree with STM32IMAGE header, in this case OP-TEE can't update the U-Boot device tree.

Moreover in trusted boot mode with FIP, as the OP-TEE nodes are present in U-Boot device tree only when needed the function stm32_fdt_disable_optee can be removed.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---

(no changes since v1)

arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 3 +++ arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 3 +++ arch/arm/mach-stm32mp/fdt.c | 11 ++++++++++- 3 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 6c62322f1c..36d166a0e1 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -21,6 +21,8 @@ st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; };

+#ifdef CONFIG_STM32MP15x_STM32IMAGE + /* only needed for boot with TF-A, witout FIP support */ firmware { optee { compatible = "linaro,optee-tz"; @@ -37,6 +39,7 @@ u-boot,dm-spl; }; }; +#endif

led { red { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index 46a43371bd..e5a1cb7084 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -20,6 +20,8 @@ st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; };

+#ifdef CONFIG_STM32MP15x_STM32IMAGE + /* only needed for boot with TF-A, witout FIP support */ firmware { optee { compatible = "linaro,optee-tz"; @@ -33,6 +35,7 @@ no-map; }; }; +#endif

led { red { diff --git a/arch/arm/mach-stm32mp/fdt.c b/arch/arm/mach-stm32mp/fdt.c index ce2fe0206f..a19e954cf7 100644 --- a/arch/arm/mach-stm32mp/fdt.c +++ b/arch/arm/mach-stm32mp/fdt.c @@ -332,7 +332,16 @@ int ft_system_setup(void *blob, struct bd_info *bd) "st,package", pkg, false); }

- if (!CONFIG_IS_ENABLED(OPTEE) || + /* + * TEMP: remove OP-TEE nodes in kernel device tree + * copied from U-Boot device tree by optee_copy_fdt_nodes + * when OP-TEE is not detected (probe failed) + * these OP-TEE nodes are present in <board>-u-boot.dtsi + * under CONFIG_STM32MP15x_STM32IMAGE only for compatibility + * when FIP is not used by TF-A + */ + if (CONFIG_IS_ENABLED(STM32MP15x_STM32IMAGE) && + CONFIG_IS_ENABLED(OPTEE) && !tee_find_device(NULL, NULL, NULL, NULL)) stm32_fdt_disable_optee(blob);

-- 2.25.1

Ahmad Fatoum

7:11 p.m.

New subject: [Uboot-stm32] [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support

Hello Patrick,

On 15.07.21 17:22, Patrick Delaunay wrote:

...

With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE is not activated), the DT nodes needed by OP-TEE are added by OP-TEE firmware in U-Boot device tree, present in FIP.

What about the SCMI nodes. Who will fix up those?

...

These nodes are only required in trusted boot, when TF-A load the file u-boot.stm32, including the U-Boot device tree with STM32IMAGE header, in this case OP-TEE can't update the U-Boot device tree.

[snip]

Cheers, Ahmad

Patrick DELAUNAY

20 Jul 20 Jul

7:31 p.m.

New subject: [Uboot-stm32] [PATCH v2 2/5] arm: stm32mp: handle the OP-TEE nodes in DT with FIP support

Hi Ahmad

On 7/15/21 7:11 PM, Ahmad Fatoum wrote:

...

Hello Patrick,

On 15.07.21 17:22, Patrick Delaunay wrote:

...
With FIP support in TF-A (when CONFIG_STM32MP15x_STM32IMAGE is not activated), the DT nodes needed by OP-TEE are added by OP-TEE firmware in U-Boot device tree, present in FIP.

What about the SCMI nodes. Who will fix up those?

In downstream, we don't have issue, as only SCMI clock are supported with TF-A (with or wihtout OP-TEE).

In latest delivery = OpenSTLinux V3.0, we modifed the STM32MP15 device tree of U-Boot

and Linux kernel to use these SCMI clocks by default.

We keep the backward compatibility only in U-Boot the basic boot (=boot with SPL and wihout TF-A).

For STMicroelectronics delivery the SCMI support don't need to be dynamically handle as it is now mandatory,

it is not linked to the FIP support or to the presence of OP-TEE,

but is it linked to power management support.

Today we have issue only for upstream: we need to continue to support DT without SCMI clocks.

and we don't have a clear solution... so SCMI clocks support is not yet upstreamed in DT side

(but upstreamed in drivers).

I have a prototype to allow overlay at U-Boot level as proposed by Marek:

TF-A BL2 found in the FIP a U-boot generic device tree and a SCMI overlay

=> U-Boot apply this overlay at boot before to parse its DT.

It is working but the boot time is impacted (5 seconds without data cache management

update and still 270 ms with dirty a dirty patch to activate data cache before apply overlay)

But 270 ms for U-Boot's DT overlay + 270ms for kernel's DT overlay is not acceptable

and SCMI upstream is suspended for STM32MP15x.

...

...
These nodes are only required in trusted boot, when TF-A load the file u-boot.stm32, including the U-Boot device tree with STM32IMAGE header, in this case OP-TEE can't update the U-Boot device tree.

[snip]

Cheers, Ahmad

Regards

Patrick

Patrick Delaunay

15 Jul 15 Jul

5:22 p.m.

New subject: [PATCH v2 3/5] arm: stm32mp: add defconfig for trusted boot with FIP

Add TF-A FIP support for trusted boot on STM32MP15x, when STM32MP15x_STM32IMAGE is not activated.

With FIP support the SSBL partition is named "fip" and its size is 4MB, so the ENV partition name in device tree (for SD card or eMMC) or offset in defconfig (CONFIG_ENV_OFFSET / CONFIG_ENV_OFFSET_REDUND) need to be modified.

With FIP the TEE MTD partitions are removed because the OP-TEE binray are included in the FIP containers.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---

Changes in v2: - synchronize defconfig with latest change

arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 6 +- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 6 +- board/st/common/Kconfig | 21 ++- board/st/common/stm32mp_mtdparts.c | 31 +++-- board/st/stm32mp1/MAINTAINERS | 1 + configs/stm32mp15_defconfig | 158 +++++++++++++++++++++++ 6 files changed, 207 insertions(+), 16 deletions(-) create mode 100644 configs/stm32mp15_defconfig

diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 36d166a0e1..f554d9359b 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -15,13 +15,17 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; - u-boot,mmc-env-partition = "ssbl"; + u-boot,mmc-env-partition = "fip"; st,adc_usb_pd = <&adc1 18>, <&adc1 19>; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; };

#ifdef CONFIG_STM32MP15x_STM32IMAGE + config { + u-boot,mmc-env-partition = "ssbl"; + }; + /* only needed for boot with TF-A, witout FIP support */ firmware { optee { diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi index e5a1cb7084..69eb285bf7 100644 --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi @@ -15,12 +15,16 @@ config { u-boot,boot-led = "heartbeat"; u-boot,error-led = "error"; - u-boot,mmc-env-partition = "ssbl"; + u-boot,mmc-env-partition = "fip"; st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>; st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; };

#ifdef CONFIG_STM32MP15x_STM32IMAGE + config { + u-boot,mmc-env-partition = "ssbl"; + }; + /* only needed for boot with TF-A, witout FIP support */ firmware { optee { diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig index ddcf33a122..2f57118bb2 100644 --- a/board/st/common/Kconfig +++ b/board/st/common/Kconfig @@ -8,18 +8,22 @@ config CMD_STBOARD

config MTDPARTS_NAND0_BOOT string "mtd boot partitions for nand0" - default "2m(fsbl),2m(ssbl1),2m(ssbl2)" + default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || \ + !TFABOOT + default "2m(fsbl),4m(fip1),4m(fip2)" depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP help This define the partitions of nand0 used to build mtparts dynamically for boot from nand0. Each partition need to be aligned with the device erase block size, 512KB is the max size for the NAND supported by stm32mp1 platform. + The fsbl partition support multiple copy of the same binary, one by + erase block.

config MTDPARTS_NAND0_TEE string "mtd tee partitions for nand0" default "512k(teeh),512k(teed),512k(teex)" - depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE help This define the tee partitions added in mtparts dynamically when tee is supported with boot from nand0. @@ -28,7 +32,9 @@ config MTDPARTS_NAND0_TEE

config MTDPARTS_NOR0_BOOT string "mtd boot partitions for nor0" - default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" + default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" if STM32MP15x_STM32IMAGE || \ + !TFABOOT + default "256k(fsbl1),256k(fsbl2),4m(fip),512k(u-boot-env)" depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP help This define the partitions of nand0 used to build mtparts dynamically @@ -40,24 +46,27 @@ config MTDPARTS_NOR0_BOOT config MTDPARTS_NOR0_TEE string "mtd tee partitions for nor0" default "256k(teeh),512k(teed),256k(teex)" - depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE help This define the tee partitions added in mtparts dynamically when tee is supported with boot from nor0.

config MTDPARTS_SPINAND0_BOOT string "mtd boot partitions for spi-nand0" - default "2m(fsbl),2m(ssbl1),2m(ssbl2)" + default "2m(fsbl),2m(ssbl1),2m(ssbl2)" if STM32MP15x_STM32IMAGE || !TFABOOT + default "2m(fsbl),4m(fip1),4m(fip2)" depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP help This define the partitions of nand0 used to build mtparts dynamically for boot from spi-nand0, 512KB is the max size for the NAND supported by stm32mp1 platform. + The fsbl partition support multiple copy of the same binary, one by + erase block.

config MTDPARTS_SPINAND0_TEE string "mtd tee partitions for spi-nand0" default "512k(teeh),512k(teed),512k(teex)" - depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP && STM32MP15x_STM32IMAGE help This define the tee partitions added in mtparts dynamically when tee is supported with boot from spi-nand0, diff --git a/board/st/common/stm32mp_mtdparts.c b/board/st/common/stm32mp_mtdparts.c index f074fc189d..8b636d62fa 100644 --- a/board/st/common/stm32mp_mtdparts.c +++ b/board/st/common/stm32mp_mtdparts.c @@ -11,7 +11,9 @@ #include <log.h> #include <mtd.h> #include <mtd_node.h> +#ifdef CONFIG_STM32MP15x_STM32IMAGE #include <tee.h> +#endif #include <asm/arch/stm32prog.h> #include <asm/arch/sys_proto.h> #include <asm/global_data.h> @@ -31,7 +33,9 @@ static void board_set_mtdparts(const char *dev, char *mtdids, char *mtdparts, const char *boot, +#ifdef CONFIG_STM32MP15x_STM32IMAGE const char *tee, +#endif const char *user) { /* mtdids: "<dev>=<dev>, ...." */ @@ -55,10 +59,12 @@ static void board_set_mtdparts(const char *dev, strncat(mtdparts, ",", MTDPARTS_LEN); }

+#ifdef CONFIG_STM32MP15x_STM32IMAGE if (tee) { strncat(mtdparts, tee, MTDPARTS_LEN); strncat(mtdparts, ",", MTDPARTS_LEN); } +#endif

strncat(mtdparts, user, MTDPARTS_LEN); } @@ -70,7 +76,10 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) static char parts[3 * MTDPARTS_LEN + 1]; static char ids[MTDIDS_LEN + 1]; static bool mtd_initialized; - bool tee, nor, nand, spinand, serial; + bool nor, nand, spinand, serial; +#ifdef CONFIG_STM32MP15x_STM32IMAGE + bool tee = false; +#endif

if (mtd_initialized) { *mtdids = ids; @@ -78,7 +87,6 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) return; }

- tee = false; nor = false; nand = false; spinand = false; @@ -89,7 +97,9 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) case BOOT_SERIAL_USB: serial = true; if (CONFIG_IS_ENABLED(CMD_STM32PROG)) { +#ifdef CONFIG_STM32MP15x_STM32IMAGE tee = stm32prog_get_tee_partitions(); +#endif nor = stm32prog_get_fsbl_nor(); } nand = true; @@ -108,9 +118,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) break; }

+#ifdef CONFIG_STM32MP15x_STM32IMAGE if (!serial && CONFIG_IS_ENABLED(OPTEE) && tee_find_device(NULL, NULL, NULL, NULL)) tee = true; +#endif

memset(parts, 0, sizeof(parts)); memset(ids, 0, sizeof(ids)); @@ -125,10 +137,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) if (nand) { mtd = get_mtd_device_nm("nand0"); if (!IS_ERR_OR_NULL(mtd)) { - const char *mtd_tee = CONFIG_MTDPARTS_NAND0_TEE; board_set_mtdparts("nand0", ids, parts, CONFIG_MTDPARTS_NAND0_BOOT, - !nor && tee ? mtd_tee : NULL, +#ifdef CONFIG_STM32MP15x_STM32IMAGE + !nor && tee ? CONFIG_MTDPARTS_NAND0_TEE : NULL, +#endif "-(UBI)"); put_mtd_device(mtd); } @@ -137,10 +150,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) if (spinand) { mtd = get_mtd_device_nm("spi-nand0"); if (!IS_ERR_OR_NULL(mtd)) { - const char *mtd_tee = CONFIG_MTDPARTS_SPINAND0_TEE; board_set_mtdparts("spi-nand0", ids, parts, CONFIG_MTDPARTS_SPINAND0_BOOT, - !nor && tee ? mtd_tee : NULL, +#ifdef CONFIG_STM32MP15x_STM32IMAGE + !nor && tee ? CONFIG_MTDPARTS_SPINAND0_TEE : NULL, +#endif "-(UBI)"); put_mtd_device(mtd); } @@ -148,10 +162,11 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)

if (nor) { if (!uclass_get_device(UCLASS_SPI_FLASH, 0, &dev)) { - const char *mtd_tee = CONFIG_MTDPARTS_NOR0_TEE; board_set_mtdparts("nor0", ids, parts, CONFIG_MTDPARTS_NOR0_BOOT, - tee ? mtd_tee : NULL, +#ifdef CONFIG_STM32MP15x_STM32IMAGE + tee ? CONFIG_MTDPARTS_NOR0_TEE : NULL, +#endif "-(nor_user)"); } } diff --git a/board/st/stm32mp1/MAINTAINERS b/board/st/stm32mp1/MAINTAINERS index fe8fc6f484..0e6d80fb45 100644 --- a/board/st/stm32mp1/MAINTAINERS +++ b/board/st/stm32mp1/MAINTAINERS @@ -5,6 +5,7 @@ T: git https://source.denx.de/u-boot/custodians/u-boot-stm.git S: Maintained F: arch/arm/dts/stm32mp15* F: board/st/stm32mp1/ +F: configs/stm32mp15_defconfig F: configs/stm32mp15_basic_defconfig F: configs/stm32mp15_trusted_defconfig F: include/configs/stm32mp1.h diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig new file mode 100644 index 0000000000..b11da7dc9f --- /dev/null +++ b/configs/stm32mp15_defconfig @@ -0,0 +1,158 @@ +CONFIG_ARM=y +CONFIG_ARCH_STM32MP=y +CONFIG_TFABOOT=y +CONFIG_SYS_MALLOC_F_LEN=0x3000 +CONFIG_SYS_MEMTEST_START=0xc0000000 +CONFIG_SYS_MEMTEST_END=0xc4000000 +CONFIG_ENV_OFFSET=0x480000 +CONFIG_ENV_SECT_SIZE=0x40000 +CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" +CONFIG_TARGET_ST_STM32MP15x=y +CONFIG_CMD_STM32KEY=y +CONFIG_CMD_STM32PROG=y +CONFIG_ENV_OFFSET_REDUND=0x4C0000 +CONFIG_TYPEC_STUSB160X=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_BOOTDELAY=1 +CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SYS_PROMPT="STM32MP> " +CONFIG_CMD_ADTIMG=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_UNZIP=y +CONFIG_CMD_ADC=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +CONFIG_CMD_FUSE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_REMOTEPROC=y +CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_BMP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_CMD_TIME=y +CONFIG_CMD_RNG=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_PMIC=y +CONFIG_CMD_REGULATOR=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y +CONFIG_CMD_UBI=y +CONFIG_OF_LIVE=y +CONFIG_ENV_IS_NOWHERE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_IS_IN_UBI=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_UBI_PART="UBI" +CONFIG_ENV_UBI_VOLUME="uboot_config" +CONFIG_ENV_UBI_VOLUME_REDUND="uboot_config_r" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_DEV=-1 +CONFIG_STM32_ADC=y +CONFIG_CLK_SCMI=y +CONFIG_SET_DFU_ALT_INFO=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0xC0000000 +CONFIG_FASTBOOT_BUF_SIZE=0x02000000 +CONFIG_FASTBOOT_USB_DEV=1 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=1 +CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y +CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc1boot0" +CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc1boot1" +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_NAME="mmc1" +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FASTBOOT_CMD_OEM_PARTCONF=y +CONFIG_FASTBOOT_CMD_OEM_BOOTBUS=y +CONFIG_GPIO_HOG=y +CONFIG_DM_HWSPINLOCK=y +CONFIG_HWSPINLOCK_STM32=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_STM32F7=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_DM_MAILBOX=y +CONFIG_STM32_IPCC=y +CONFIG_STM32_FMC2_EBI=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_STM32_SDMMC2=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_SYS_MTDPARTS_RUNTIME=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_STM32_FMC2=y +CONFIG_MTD_SPI_NAND=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_SPI_FLASH_MTD=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DWC_ETH_QOS=y +CONFIG_PHY=y +CONFIG_PHY_STM32_USBPHYC=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_STMFX=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_STPMIC1=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_REGULATOR_STM32_VREFBUF=y +CONFIG_DM_REGULATOR_STPMIC1=y +CONFIG_REMOTEPROC_STM32_COPRO=y +CONFIG_RESET_SCMI=y +CONFIG_DM_RNG=y +CONFIG_RNG_STM32MP1=y +CONFIG_DM_RTC=y +CONFIG_RTC_STM32=y +CONFIG_SERIAL_RX_BUFFER=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_STM32_QSPI=y +CONFIG_STM32_SPI=y +CONFIG_TEE=y +CONFIG_OPTEE=y +# CONFIG_OPTEE_TA_AVB is not set +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics" +CONFIG_USB_GADGET_VENDOR_NUM=0x0483 +CONFIG_USB_GADGET_PRODUCT_NUM=0x5720 +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_DM_VIDEO=y +CONFIG_BACKLIGHT_GPIO=y +CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y +CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y +CONFIG_VIDEO_STM32=y +CONFIG_VIDEO_STM32_DSI=y +CONFIG_VIDEO_STM32_MAX_XRES=1280 +CONFIG_VIDEO_STM32_MAX_YRES=800 +CONFIG_VIDEO_BMP_RLE8=y +CONFIG_BMP_16BPP=y +CONFIG_BMP_24BPP=y +CONFIG_BMP_32BPP=y +CONFIG_WDT=y +CONFIG_WDT_STM32MP=y +CONFIG_ERRNO_STR=y +CONFIG_FDT_FIXUP_PARTITIONS=y +# CONFIG_LMB_USE_MAX_REGIONS is not set +CONFIG_LMB_MEMORY_REGIONS=2 +CONFIG_LMB_RESERVED_REGIONS=16

-- 2.25.1

Patrick Delaunay

5:22 p.m.

New subject: [PATCH v2 4/5] doc: st: stm32mp1: Add FIP support for trusted boot

TF-A for STM32MP15 now supports the FIP: it is a packaging format which includes the secure monitor, u-boot-nodtb.bin and u-boot.dtb

This FIP file is loaded by FSBL = TF-A BL2.

This patch updates the board documentation to use this FIP file and no more u-boot.stm32 (with STM32 image header) which is no more generated.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---

Changes in v2: - fix one typo: s/ enought / enough

doc/board/st/stm32mp1.rst | 166 ++++++++++++++++++++++---------------- 1 file changed, 97 insertions(+), 69 deletions(-)

diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst index f0c2b09b98..7440753788 100644 --- a/doc/board/st/stm32mp1.rst +++ b/doc/board/st/stm32mp1.rst @@ -60,7 +60,7 @@ Currently the following boards are supported: Boot Sequences --------------

-3 boot configurations are supported with: +2 boot configurations are supported with:

+----------+------------------------+-------------------------+--------------+ | **ROM** | **FSBL** | **SSBL** | **OS** | @@ -70,10 +70,12 @@ Boot Sequences | | embedded RAM | DDR | +----------+------------------------+-------------------------+--------------+

-The **Trusted** boot chain -`````````````````````````` +The **Trusted** boot chain with TF-A +`````````````````````````````````````

-defconfig_file : stm32mp15_trusted_defconfig +defconfig_file : + + **stm32mp15_defconfig** (for TF-A with FIP support) + + **stm32mp15_trusted_defconfig** (for TF-A without FIP support)

-TF-A performs a full initialization of Secure peripherals and installs a -secure monitor, BL32: +TF-A (BL2) initialize the DDR and loads the next stage binaries from a FIP file: + + BL32: a secure monitor BL32 = SPMin provided by TF-A or OP-TEE : performs a full initialization of Secure peripherals and provides service to normal world + + BL33: a non-trusted firmware = U-Boot, running in normal world and uses the secure monitor to access to secure resources. + + HW_CONFIG: The hardware configuration file = the U-Boot device tree

- * SPMin provided by TF-A or - * OP-TEE from specific partitions (teeh, teed, teex). +The **Basic** boot chain with SPL +`````````````````````````````````

-U-Boot is running in normal world and uses the secure monitor to access -to secure resources. - -The **Basic** boot chain -```````````````````````` - -defconfig_file : stm32mp15_basic_defconfig +defconfig_file : + + **stm32mp15_basic_defconfig**

for example: use one output directory for each configuration::

+ # export KBUILD_OUTPUT=stm32mp15 # export KBUILD_OUTPUT=stm32mp15_trusted # export KBUILD_OUTPUT=stm32mp15_basic

you can build outside of code directory::

- # export KBUILD_OUTPUT=../build/stm32mp15_trusted + # export KBUILD_OUTPUT=../build/stm32mp15

4. Configure U-Boot::

@@ -176,7 +176,7 @@ Build Procedure

with <defconfig_file>:

- - For **trusted** boot mode : **stm32mp15_trusted_defconfig** + - For **trusted** boot mode : **stm32mp15_defconfig** or stm32mp15_trusted_defconfig - For basic boot mode: stm32mp15_basic_defconfig

5. Configure the device-tree and build the U-Boot image:: @@ -185,13 +185,13 @@ Build Procedure

Examples:

- a) trusted boot on ev1:: + a) trusted boot with FIP on ev1::

- # export KBUILD_OUTPUT=stm32mp15_trusted - # make stm32mp15_trusted_defconfig + # export KBUILD_OUTPUT=stm32mp15 + # make stm32mp15_defconfig # make DEVICE_TREE=stm32mp157c-ev1 all

- b) trusted with OP-TEE boot on dk2:: + b) trusted boot without FIP on dk2::

# export KBUILD_OUTPUT=stm32mp15_trusted # make stm32mp15_trusted_defconfig @@ -223,16 +223,32 @@ Build Procedure

6. Output files

- BootRom and TF-A expect binaries with STM32 image header - SPL expects file with U-Boot uImage header + The ROM code expects FSBL binaries with STM32 image header. + TF-A expects: + - a FIP binary, including the OS monitor (SPmin or OP-TEE) and the U-Boot + binary + device tree + - binaries with STM32 image header: U-Boot and OP-TEE + SPL expects file with U-Boot uImage header.

So in the output directory (selected by KBUILD_OUTPUT), you can found the needed files:

- For **Trusted** boot (with or without OP-TEE)

- - FSBL = **tf-a.stm32** (provided by TF-A compilation) - - SSBL = **u-boot.stm32** + - with FIP: + - FSBL = **tf-a.stm32** and **fip.bin** (provided by TF-A compilation) + - SSBL = **u-boot-nodtb.bin** and **u-boot.dtb** + + The file fip.bin includes the 2 U-Boot files, u-boot-nodtb.bin and u-boot.dtb; + they are needed during the TF-A compilation(BL33=u-boot-nodtb.bin BL33_CFG=u-boot.dtb). + + You can also update a existing it with the tools provided by TF-A: + + # fiptool update --nt-fw u-boot-nodtb.bin --hw-config u-boot.dtb fip-stm32mp157c-ev1.bin + + - without FIP support: + - FSBL = **tf-a.stm32** (provided by TF-A compilation) + - SSBL = **u-boot.stm32**

- For Basic boot

@@ -299,22 +315,27 @@ Prepare an SD card The minimal requirements for STMP32MP15x boot up to U-Boot are:

- GPT partitioning (with gdisk or with sgdisk) -- 2 fsbl partitions, named fsbl1 and fsbl2, size at least 256KiB -- one ssbl partition for U-Boot +- 2 fsbl partitions, named "fsbl1" and "fsbl2", size at least 256KiB +- one partition named "fip" for FIP or U-Boot (TF-A search the "fip" + partition and SPL search the 3th partition, because + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3) + +Without FIP support in TF-A, the 3rd partition "fip" for u-boot.stm32 must +be named "ssbl".

Then the minimal GPT partition is:

- +-------+--------+---------+-------------+ - | *Num* | *Name* | *Size* | *Content* | - +=======+========+=========+=============+ - | 1 | fsbl1 | 256 KiB | TF-A or SPL | - +-------+--------+---------+-------------+ - | 2 | fsbl2 | 256 KiB | TF-A or SPL | - +-------+--------+---------+-------------+ - | 3 | ssbl | enought | U-Boot | - +-------+--------+---------+-------------+ - | 4 | <any> | <any> | Rootfs | - +-------+--------+---------+-------------+ + +-------+--------+---------+------------------------------+ + | *Num* | *Name* | *Size* | *Content* | + +=======+========+=========+==============================+ + | 1 | fsbl1 | 256 KiB | TF-A BL2 (tf-a.stm32) or SPL | + +-------+--------+---------+------------------------------+ + | 2 | fsbl2 | 256 KiB | TF-A BL2 (tf-a.stm32) or SPL | + +-------+--------+---------+------------------------------+ + | 3 | fip | enough | fip.bin or u-boot.img | + +-------+--------+---------+------------------------------+ + | 4 | <any> | <any> | Rootfs | + +-------+--------+---------+------------------------------+

Add a 4th partition (Rootfs) marked bootable with a file extlinux.conf following the Generic Distribution feature (doc/README.distro for use). @@ -324,22 +345,22 @@ According the used card reader select the correct block device

In the next example, it is /dev/mmcblk0

-For example: with gpt table with 128 entries +For example: with gpt table with 128 entries and 4MB fip partition

a) remove previous formatting::

# sgdisk -o /dev/<SD card dev>

-b) create minimal image:: +b) create minimal image for FIP::

# sgdisk --resize-table=128 -a 1 \ -n 1:34:545 -c 1:fsbl1 \ -n 2:546:1057 -c 2:fsbl2 \ - -n 3:1058:5153 -c 3:ssbl \ - -n 4:5154: -c 4:rootfs \ + -n 3:1058:9249 -c 3:fip \ + -n 4:9250: -c 4:rootfs -A 4:set:2 \ -p /dev/<SD card dev>

- With other partition for kernel one partition rootfs for kernel. + With partition 4 marked bootable (bit 2).

c) copy the FSBL (2 times) and SSBL file on the correct partition. in this example in partition 1 to 3 @@ -356,7 +377,7 @@ c) copy the FSBL (2 times) and SSBL file on the correct partition.

# dd if=tf-a.stm32 of=/dev/mmcblk0p1 # dd if=tf-a.stm32 of=/dev/mmcblk0p2 - # dd if=u-boot.stm32 of=/dev/mmcblk0p3 + # dd if=fip.bin of=/dev/mmcblk0p3

To boot from SD card, select BootPinMode = 1 0 1 and reset.

@@ -366,34 +387,41 @@ Prepare eMMC You can use U-Boot to copy binary in eMMC.

In the next example, you need to boot from SD card and the images -(u-boot-spl.stm32, u-boot.img for systems without CONFIG_SPL_LOAD_FIT -or u-boot.itb for systems with CONFIG_SPL_LOAD_FIT=y) are presents on -SD card (mmc 0) in ext4 partition 4 (bootfs). +(tf-a.stm32, fip.bin / u-boot-spl.stm32, u-boot.img for systems without CONFIG_SPL_LOAD_FIT +or u-boot.itb for systems with CONFIG_SPL_LOAD_FIT=y) are presents +on SD card (mmc 0) in ext4 partition 4 (bootfs)

To boot from SD card, select BootPinMode = 1 0 1 and reset.

Then you update the eMMC with the next U-Boot command :

a) prepare GPT on eMMC, - example with 2 partitions, bootfs and roots:: + example with 3 partitions, fip, bootfs and roots::

- # setenv emmc_part "name=ssbl,size=2MiB;name=bootfs,type=linux,bootable,size=64MiB;name=rootfs,type=linux,size=512" + # setenv emmc_part "name=fip,size=4MiB;name=bootfs,type=linux,bootable,size=64MiB;name=rootfs,type=linux,size=512" # gpt write mmc 1 ${emmc_part}

-b) copy SPL on eMMC on firts boot partition +b) copy FSBL, TF-A or SPL, on first eMMC boot partition (SPL max size is 256kB, with LBA 512, 0x200)::

+ # ext4load mmc 0:4 0xC0000000 tf-a.stm32 + or # ext4load mmc 0:4 0xC0000000 u-boot-spl.stm32 + # mmc dev 1 # mmc partconf 1 1 1 1 # mmc write ${fileaddr} 0 200 # mmc partconf 1 1 1 0

-c) copy U-Boot in first GPT partition of eMMC:: +c) copy SSBL, FIP or U-Boot binary, in first GPT partition of eMMC::

+ # ext4load mmc 0:4 0xC0000000 fip.bin + or # ext4load mmc 0:4 0xC0000000 u-boot.img # Without CONFIG_SPL_LOAD_FIT - OR - ext4load mmc 0:4 0xC0000000 u-boot.itb # With CONFIG_SPL_LOAD_FIT=y + or + # ext4load mmc 0:4 0xC0000000 u-boot.itb # With CONFIG_SPL_LOAD_FIT=y + + # mmc dev 1 # part start mmc 1 1 partstart # mmc write ${fileaddr} ${partstart} ${filesize} @@ -526,14 +554,14 @@ On EV1 board, booting from SD card, without OP-TEE:: dev: RAM alt: 2 name: uramdisk.image.gz layout: RAM_ADDR dev: eMMC alt: 3 name: mmc0_fsbl1 layout: RAW_ADDR dev: eMMC alt: 4 name: mmc0_fsbl2 layout: RAW_ADDR - dev: eMMC alt: 5 name: mmc0_ssbl layout: RAW_ADDR + dev: eMMC alt: 5 name: mmc0_fip layout: RAW_ADDR dev: eMMC alt: 6 name: mmc0_bootfs layout: RAW_ADDR dev: eMMC alt: 7 name: mmc0_vendorfs layout: RAW_ADDR dev: eMMC alt: 8 name: mmc0_rootfs layout: RAW_ADDR dev: eMMC alt: 9 name: mmc0_userfs layout: RAW_ADDR dev: eMMC alt: 10 name: mmc1_boot1 layout: RAW_ADDR dev: eMMC alt: 11 name: mmc1_boot2 layout: RAW_ADDR - dev: eMMC alt: 12 name: mmc1_ssbl layout: RAW_ADDR + dev: eMMC alt: 12 name: mmc1_fip layout: RAW_ADDR dev: eMMC alt: 13 name: mmc1_bootfs layout: RAW_ADDR dev: eMMC alt: 14 name: mmc1_vendorfs layout: RAW_ADDR dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR @@ -554,14 +582,14 @@ All the supported device are exported for dfu-util tool:: Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=14, name="mmc1_vendorfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=13, name="mmc1_bootfs", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=12, name="mmc1_ssbl", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=12, name="mmc1_fip", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=11, name="mmc1_boot2", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=10, name="mmc1_boot1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=9, name="mmc0_userfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=8, name="mmc0_rootfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=7, name="mmc0_vendorfs", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=6, name="mmc0_bootfs", serial="002700333338511934383330" - Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=5, name="mmc0_ssbl", serial="002700333338511934383330" + Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=5, name="mmc0_fip", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=4, name="mmc0_fsbl2", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=3, name="mmc0_fsbl1", serial="002700333338511934383330" Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=2, name="uramdisk.image.gz", serial="002700333338511934383330" @@ -572,9 +600,9 @@ You can update the boot device:

- SD card (mmc0) ::

- $> dfu-util -d 0483:5720 -a 3 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 4 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 5 -D u-boot-stm32mp157c-ev1-trusted.img + $> dfu-util -d 0483:5720 -a 3 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 4 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 5 -D fip-stm32mp157c-ev1.bin $> dfu-util -d 0483:5720 -a 6 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4 $> dfu-util -d 0483:5720 -a 7 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4 $> dfu-util -d 0483:5720 -a 8 -D st-image-weston-openstlinux-weston-stm32mp1.ext4 @@ -582,9 +610,9 @@ You can update the boot device:

- EMMC (mmc1)::

- $> dfu-util -d 0483:5720 -a 10 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 11 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 12 -D u-boot-stm32mp157c-ev1-trusted.img + $> dfu-util -d 0483:5720 -a 10 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 11 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 12 -D fip-stm32mp157c-ev1.bin $> dfu-util -d 0483:5720 -a 13 -D st-image-bootfs-openstlinux-weston-stm32mp1.ext4 $> dfu-util -d 0483:5720 -a 14 -D st-image-vendorfs-openstlinux-weston-stm32mp1.ext4 $> dfu-util -d 0483:5720 -a 15 -D st-image-weston-openstlinux-weston-stm32mp1.ext4 @@ -601,14 +629,14 @@ only the MTD partition on the boot devices are available, for example:

- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) ::

- $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 23 -D u-boot-stm32mp157c-ev1-trusted.img + $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi

- NAND (nand0 = alt 21)::

- $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1-trusted.stm32 - $> dfu-util -d 0483:5720 -a 23 -D u-boot-stm32mp157c-ev1-trusted.img - $> dfu-util -d 0483:5720 -a 24 -D u-boot-stm32mp157c-ev1-trusted.img + $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32 + $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin + $> dfu-util -d 0483:5720 -a 24 -D fip-stm32mp157c-ev1.bin $> dfu-util -d 0483:5720 -a 25 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi

-- 2.25.1

Patrick Delaunay

5:22 p.m.

New subject: [PATCH v2 5/5] stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIP

The MTD tee partitions used to save the OP-TEE binary are needed when TF-A doesn't use the FIP container to load binaries.

This patch puts under CONFIG_STM32MP15x_STM32IMAGE flag the associated code in U-Boot binary and prepare the code cleanup when CONFIG_STM32MP15x_STM32IMAGE support will be removed after TF-A migration to FIP support.

Signed-off-by: Patrick Delaunay patrick.delaunay@foss.st.com Reviewed-by: Patrice Chotard patrice.chotard@foss.st.com ---

(no changes since v1)

arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c | 2 ++ arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c | 4 ++++ arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 ++ arch/arm/mach-stm32mp/include/mach/stm32prog.h | 2 ++ 4 files changed, 10 insertions(+)

diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c index 064f51b2c7..1bccad4e6d 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c @@ -185,6 +185,7 @@ U_BOOT_CMD(stm32prog, 5, 0, do_stm32prog, " <size> = size of flashlayout (optional for image with STM32 header)\n" );

+#ifdef CONFIG_STM32MP15x_STM32IMAGE bool stm32prog_get_tee_partitions(void) { if (stm32prog_data) @@ -192,6 +193,7 @@ bool stm32prog_get_tee_partitions(void)

return false; } +#endif

bool stm32prog_get_fsbl_nor(void) { diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c index 96ebc6d978..0971ee79af 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c @@ -824,7 +824,9 @@ static int treat_partition_list(struct stm32prog_data *data) INIT_LIST_HEAD(&data->dev[j].part_list); }

+#ifdef CONFIG_STM32MP15x_STM32IMAGE data->tee_detected = false; +#endif data->fsbl_nor_detected = false; for (i = 0; i < data->part_nb; i++) { part = &data->part_array[i]; @@ -878,10 +880,12 @@ static int treat_partition_list(struct stm32prog_data *data) /* fallthrough */ case STM32PROG_NAND: case STM32PROG_SPI_NAND: +#ifdef CONFIG_STM32MP15x_STM32IMAGE if (!data->tee_detected && !strncmp(part->name, "tee", 3)) data->tee_detected = true; break; +#endif default: break; } diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h index 9d58cf0e2d..240c5c44bc 100644 --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h @@ -122,7 +122,9 @@ struct stm32prog_data { struct stm32prog_dev_t dev[STM32PROG_MAX_DEV]; /* array of device */ int part_nb; /* nb of partition */ struct stm32prog_part_t *part_array; /* array of partition */ +#ifdef CONFIG_STM32MP15x_STM32IMAGE bool tee_detected; +#endif bool fsbl_nor_detected;

/* command internal information */ diff --git a/arch/arm/mach-stm32mp/include/mach/stm32prog.h b/arch/arm/mach-stm32mp/include/mach/stm32prog.h index c080b9cc42..99be4e1d65 100644 --- a/arch/arm/mach-stm32mp/include/mach/stm32prog.h +++ b/arch/arm/mach-stm32mp/include/mach/stm32prog.h @@ -11,6 +11,8 @@ int stm32prog_read_medium_virt(struct dfu_entity *dfu, u64 offset, void *buf, long *len); int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size);

+#ifdef CONFIG_STM32MP15x_STM32IMAGE bool stm32prog_get_tee_partitions(void); +#endif

bool stm32prog_get_fsbl_nor(void);

-- 2.25.1

1388

Age (days ago)

1393

Last active (days ago)

List overview

Download

7 comments

3 participants

tags (0)

participants (3)

Ahmad Fatoum
Patrick DELAUNAY
Patrick Delaunay