Based on at91sam9263. It is a thermostimulator for hair styling. Subsection of Software is based on at91sam9263ek one.

Signed-off-by: giulio.benetti@micronovasrl.com

diff -urpN b/board/micronova/c5000/c5000.c a/board/micronova/c5000/c5000.c --- b/board/micronova/c5000/c5000.c 1970-01-01 01:00:00.000000000 +0100 +++ a/board/micronova/c5000/c5000.c 2009-06-18 12:57:52.000000000 +0200 @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * + * Giulio Benetti giulio.benetti@micronovasrl.com + * Micronova srl info@micronovasrl.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/sizes.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9263_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/hardware.h> +#include <lcd.h> +#include <atmel_lcdc.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void c5000_serial_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +} + +static void c5000_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + at91_sys_write(AT91_MATRIX_EBI0CSA, + csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA | + 1 << AT91SAM9263_ID_PIOCDE); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PA22, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PD15, 1); +} + +#ifdef CONFIG_HAS_DATAFLASH +static void c5000_spi_hw_init(void) +{ + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); +} +#endif + +vidinfo_t panel_info = { + vl_col: 640, + vl_row: 480, + vl_clk: 25000000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 4, + vl_left_margin: 16, + vl_right_margin:8, + vl_vsync_len: 1, + vl_upper_margin:8, + vl_lower_margin:5, + mmio: AT91SAM9263_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */ +} + +static void c5000_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + + gd->fb_base = PHYS_SDRAM + 0x3FB5000; /* mapped into sdram @ 0x20000000 + (64 MByte - (640x480) 8bpp) */ +} + +static void c5000_set_rst(void) +{ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + (AT91_RSTC_ERSTL & (0x0E << 8)) | + AT91_RSTC_URSTEN); +} + +int board_init(void) +{ + c5000_set_rst(); + + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of C5000-Board */ + gd->bd->bi_arch_number = MACH_TYPE_C5000; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + c5000_serial_hw_init(); + c5000_nand_hw_init(); +#ifdef CONFIG_HAS_DATAFLASH + c5000_spi_hw_init(); +#endif + c5000_lcd_hw_init(); + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff -urpN b/board/micronova/c5000/config.mk a/board/micronova/c5000/config.mk --- b/board/micronova/c5000/config.mk 1970-01-01 01:00:00.000000000 +0100 +++ a/board/micronova/c5000/config.mk 2009-06-18 12:55:19.000000000 +0200 @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff -urpN b/board/micronova/c5000/Makefile a/board/micronova/c5000/Makefile --- b/board/micronova/c5000/Makefile 1970-01-01 01:00:00.000000000 +0100 +++ a/board/micronova/c5000/Makefile 2009-06-18 12:55:19.000000000 +0200 @@ -0,0 +1,56 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop stelian.pop@leadtechdesign.com +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += c5000.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff -urpN b/board/micronova/c5000/nand.c a/board/micronova/c5000/nand.c --- b/board/micronova/c5000/nand.c 1970-01-01 01:00:00.000000000 +0100 +++ a/board/micronova/c5000/nand.c 2009-06-18 16:49:04.000000000 +0200 @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void c5000_nand_hwcontrol(struct mtd_info *mtd, + int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); + + if (ctrl & NAND_CLE) + IO_ADDR_W |= MASK_CLE; + if (ctrl & NAND_ALE) + IO_ADDR_W |= MASK_ALE; + + at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); + this->IO_ADDR_W = (void *) IO_ADDR_W; + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +static int c5000_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PA22); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = c5000_nand_hwcontrol; + nand->dev_ready = c5000_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff -urpN b/board/micronova/c5000/partition.c a/board/micronova/c5000/partition.c --- b/board/micronova/c5000/partition.c 1970-01-01 01:00:00.000000000 +0100 +++ a/board/micronova/c5000/partition.c 2009-06-18 16:50:06.000000000 +0200 @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson ulf@atmel.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { + {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, +}; diff -urpN b/include/configs/c5000.h a/include/configs/c5000.h --- b/include/configs/c5000.h 1970-01-01 01:00:00.000000000 +0100 +++ a/include/configs/c5000.h 2009-06-18 17:06:07.000000000 +0200 @@ -0,0 +1,156 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop stelian.pop@leadtechdesign.com + * Lead Tech Design <www.leadtechdesign.com> + * Giulio Benetti giulio.benetti@micronovasrl.com + * Micronova srl info@micronovasrl.com + * + * Configuation settings for the C5000 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_CPU_NAME "AT91SAM9263" +#define AT91_MAIN_CLOCK 20000000 /* 20.000 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC */ +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +/* LCD */ +#define CONFIG_LCD 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define CONFIG_ATMEL_LCD 1 +#define CONFIG_ATMEL_LCD_RGB555 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_BOOTDELAY 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_SOURCE + +#define CONFIG_CMD_NAND 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_ATMEL_DATAFLASH_SPI +#define CONFIG_HAS_DATAFLASH 1 +#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) +#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 +#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define AT91_SPI_CLK 15000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NOR flash, not populated */ +#define CONFIG_SYS_NO_FLASH 1 + +/* NAND flash */ +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 + +/* Ethernet */ +#define CONFIG_NET_MULTI + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x23e00000 + +#ifdef CONFIG_USE_DATAFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_DATAFLASH 1 +#define CONFIG_SYS_MONITOR_BASE (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CONFIG_ENV_OFFSET 0x4200 +#define CONFIG_ENV_ADDR (CONFIG_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_SIZE 0x4200 + +#else /* CONFIG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#define CONFIG_AT91SAM9_WATCHDOG +#define CONFIG_HW_WATCHDOG + +#endif diff -urpN b/Makefile a/Makefile --- b/Makefile 2009-06-14 21:30:39.000000000 +0200 +++ a/Makefile 2009-06-18 12:55:19.000000000 +0200 @@ -2752,6 +2752,9 @@ at91sam9rlek_config : unconfig pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91

+c5000_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs c5000 micronova at91 + ######################################################################## ## ARM Integrator boards - see doc/README-integrator for more info. integratorap_config \